4935 lines
170 KiB
Text
4935 lines
170 KiB
Text
==============================================================
|
||
Guild: DallasMakerspace
|
||
Channel: Committees / electronics
|
||
==============================================================
|
||
|
||
[4/8/2017 7:04 PM] kenpurcell
|
||
wonder when someone shows up in here?
|
||
|
||
|
||
[4/8/2017 7:04 PM] danielh3680
|
||
Don't hold your breath!
|
||
|
||
|
||
[4/8/2017 7:56 PM] canibalcrab
|
||
When I posted in metal shop I was the first post since December
|
||
|
||
|
||
[4/8/2017 10:48 PM] slunchery
|
||
c-c-c-combo breaker
|
||
|
||
|
||
[4/8/2017 11:01 PM] danielh3680
|
||
Hey, check out this expensive resistor I found! http://www.mouser.com/search/ProductDetail.aspx?R=0virtualkey0virtualkeyPTF5610K000TZEKv
|
||
|
||
|
||
[4/8/2017 11:02 PM] danielh3680
|
||
A steal at only $12 per unit, it's a 0.01% 5ppm/C precision, low-noise job
|
||
|
||
|
||
[4/16/2017 1:19 AM] tmc42423886
|
||
Not sure why, but I've joined now. Spent several hours at the space today. Finally got the new controller board hooked up to my 3D printer.
|
||
|
||
|
||
[4/16/2017 1:29 AM] canibalcrab
|
||
@tmc4242 because you arent afraid of change!
|
||
|
||
|
||
[4/16/2017 1:29 AM] themitch22
|
||
Which controller board
|
||
|
||
|
||
[4/16/2017 1:30 AM] tmc42423886
|
||
MKS-Sbase. Smoothieboard Chinese clone
|
||
|
||
|
||
[4/16/2017 1:30 AM] themitch22
|
||
Yeah good board let me know how it works out
|
||
|
||
|
||
[4/16/2017 1:32 AM] tmc42423886
|
||
@pearce - I detest change, especially change for the sake of change only. Hangouts is a better platform for my use. As previously noted.
|
||
|
||
|
||
[4/16/2017 1:33 AM] tmc42423886
|
||
Will do Mitch. Have to actually get it to print something next. Hopefully the calibration phase won't be too bad.
|
||
|
||
|
||
[4/16/2017 1:48 AM] canibalcrab
|
||
@tmc4242 i assure you i didnt do it for the sake of change, sorry your work has it banned, but they probably did that to make sure you are working at work. if youd like to argue about the merits of it we can move to a PM or #general_chatter
|
||
|
||
|
||
[4/16/2017 1:49 AM] tmc42423886
|
||
Nothing to argue about. I see no merit. Your comments about my work are not welcome either.
|
||
|
||
|
||
[5/5/2017 1:44 PM] banditbingo
|
||
yo anyone know a good way to reuse raspi heat sinks?
|
||
|
||
|
||
[5/5/2017 1:45 PM] banditbingo
|
||
I think my rpi1bs are crapping out after 3 years
|
||
|
||
|
||
[5/5/2017 4:33 PM] raymond011905
|
||
Get some thermal tape to put them back on with...
|
||
|
||
|
||
[5/5/2017 4:56 PM] banditbingo
|
||
thanks
|
||
|
||
|
||
[5/5/2017 4:57 PM] banditbingo
|
||
@Raymond they sell that at micro centre?
|
||
|
||
|
||
[5/5/2017 6:41 PM] raymond011905
|
||
i think tanner's will have it
|
||
|
||
|
||
[5/5/2017 6:41 PM] raymond011905
|
||
if you would've asked yesterday i couldn't picked up some today in silicon valley before flying home tomorrow on a red-eye
|
||
|
||
|
||
[5/5/2017 6:42 PM] raymond011905
|
||
but the store closes in 19 minutes and i'm across town from it
|
||
|
||
|
||
[5/5/2017 6:43 PM] raymond011905
|
||
you can also find thermal adhesive in 2 part form but that's more permanent. fry's and micro center both carry that
|
||
|
||
|
||
[5/6/2017 7:14 PM] banditbingo
|
||
@Raymond is thermal pads the thing ur talking about that's permanent?
|
||
|
||
|
||
[5/6/2017 7:15 PM] banditbingo
|
||
that's what I'm buying at micro center.
|
||
|
||
|
||
[5/6/2017 7:15 PM] banditbingo
|
||
tanner doesn't have thermal tape
|
||
|
||
|
||
[5/7/2017 10:11 AM] bendertx
|
||
radioheads unite. where is everybody? on the roof?
|
||
|
||
|
||
[5/7/2017 10:21 AM] limeytx
|
||
https://youtu.be/r5V8ecsrxeY
|
||
|
||
{Embed}
|
||
RobsonandJeromeVEVO
|
||
https://youtu.be/r5V8ecsrxeY
|
||
Robson & Jerome - Up On The Roof
|
||
Robson & Jerome' official music video for 'Up On The Roof'. Click to listen to Robson & Jerome on Spotify: http://smarturl.it/RobJerSpotify?IQid=RandJUOTR As...
|
||
https://images-ext-1.discordapp.net/external/XvRrDOM_JJsW9QbVC_W65mgtKEiVyKfMFbW8wxlNdFY/https/i.ytimg.com/vi/r5V8ecsrxeY/maxresdefault.jpg
|
||
|
||
|
||
[5/8/2017 9:41 AM] raymond011905
|
||
Thermal pads are different... they aren't adhesive. MC only carries the pads, thermal compound, or thermal adhesive 2-part epoxy mix.
|
||
|
||
|
||
[5/8/2017 9:42 AM] raymond011905
|
||
they don't carry thermal tape that holds the heatsink on without screws/clamps
|
||
|
||
|
||
[5/8/2017 11:20 AM] denzuko
|
||
@Raymond that just remind me of https://1.bp.blogspot.com/-4gbBGWxt8Uk/WF52Qjr0JnI/AAAAAAAAByk/gp_PX0pDfr4sNooLks8pkbFGxII6HdemwCLcB/s1600/Groot.jpg
|
||
|
||
{Embed}
|
||
https://1.bp.blogspot.com/-4gbBGWxt8Uk/WF52Qjr0JnI/AAAAAAAAByk/gp_PX0pDfr4sNooLks8pkbFGxII6HdemwCLcB/s1600/Groot.jpg
|
||
https://images-ext-1.discordapp.net/external/VqKuGjdcWbnPEJtduPayz-KVcZ87YP1QPcM39J7ss6E/https/1.bp.blogspot.com/-4gbBGWxt8Uk/WF52Qjr0JnI/AAAAAAAAByk/gp_PX0pDfr4sNooLks8pkbFGxII6HdemwCLcB/s1600/Groot.jpg
|
||
|
||
|
||
[6/6/2017 11:59 AM] denzuko
|
||
would anyone know of a good way to "short" two gpio pins in tiny package that will do the short/switch on a VCC pulse but does send a electric signal to either connector?
|
||
|
||
|
||
[6/6/2017 12:00 PM] denzuko
|
||
I'm thinking something like a very tiny relay of sorts, but not sure which parts and part number would work
|
||
|
||
|
||
[6/7/2017 11:53 AM] denzuko
|
||
maybe a mosfet would work? but how would one close the circuit so it acts more like a button?
|
||
|
||
|
||
[6/8/2017 1:09 PM] darrent_
|
||
It sounds like you need a conversion from momentary switch behavior to latching behavior.
|
||
|
||
|
||
[6/8/2017 1:09 PM] darrent_
|
||
http://www.mosaic-industries.com/embedded-systems/microcontroller-projects/electronic-circuits/push-button-switch-turn-on/latching-toggle-power-switch
|
||
|
||
|
||
[6/8/2017 1:10 PM] darrent_
|
||
Figure 2 sounds like what you are wanting to do where the Power Input net and the Switched Power net are the GPIO lines that you wish to short together.
|
||
|
||
|
||
[6/8/2017 6:50 PM] pogopadawan
|
||
I'm looking for help with networking two Raspberry Pis via an Ad-Hoc network. Does anyone know who I could talk to about this?
|
||
|
||
|
||
[6/8/2017 7:34 PM] canibalcrab
|
||
@themitch22
|
||
|
||
|
||
[6/8/2017 7:49 PM] themitch22
|
||
@Denzuko.sdf.org
|
||
|
||
|
||
[6/8/2017 9:46 PM] denzuko
|
||
lol. yes I'm the resident IT/Linux/RPI guru @pogopadawan
|
||
|
||
|
||
[6/8/2017 9:47 PM] denzuko
|
||
so I guess you're doing this over WiFi? would you be using ipv4 or ipv6?
|
||
|
||
|
||
[6/8/2017 9:48 PM] denzuko
|
||
also, would you be using rasbian or arch?
|
||
|
||
|
||
[6/8/2017 10:00 PM] pogopadawan
|
||
Yes. I'm using ipv4 on raspbian. Currently I'm using project Byzantium to get a base working, but it doesn't give me as many options as I need. If you are here now I'm in the common area to talk more if needed.
|
||
|
||
|
||
[6/12/2017 4:58 PM] darrent_
|
||
Left my water bottle in the room. Will pick up later this evening.
|
||
|
||
|
||
[6/30/2017 7:10 PM] denzuko
|
||
sorry @art I just found a spanner I was using in my pocket when I got home. Guess I had a brain fart or got destination.
|
||
|
||
|
||
I'll be by this weekend to wrap up a few things on my back log so I'll bring it by and donate a little to your committee while I'm at it.
|
||
|
||
|
||
[7/1/2017 11:36 AM] artg_dms8185
|
||
Thanks!
|
||
|
||
|
||
[7/2/2017 2:06 AM] denzuko
|
||
the spanner is right back at home in his drawer at the space. again sorry about that. is there anything pressing you guys are needing for the committee like tools or supplies?
|
||
|
||
|
||
[7/2/2017 9:34 AM] artg_dms8185
|
||
At the moment no. Will be ordering in the near future. Need to do a walk around the Space to round up/return tools. If you run across tools w/ yellow on them, they probably need to be returned the ELab.
|
||
|
||
|
||
[7/3/2017 7:25 AM] denzuko
|
||
will do
|
||
|
||
|
||
[7/5/2017 4:14 PM] Deleted User
|
||
Can I power motors (4) rated at 4v each with a 5v 10a power supply
|
||
|
||
|
||
[8/7/2017 5:38 PM] anandelamaran
|
||
Just checking, is the 'Wavetek Model 143' Function generator working and available to use? I am planning to do some experiments this weekend so wanted to know before visiting the space. Thanks.
|
||
|
||
|
||
[8/13/2017 2:09 PM] stark4machines
|
||
Can I get someone's help on a Line 6 Delay Pedal? It's never been dropped or anything, but I assume it's a loose jack connection or something simple. It powers on and everything, but no audio. Any help would be greatly appreciated! (718) 795-3187
|
||
|
||
|
||
[4/13/2018 11:57 PM] kevpat
|
||
As far as the expansion goes. May I suggest a computer test bench.
|
||
|
||
|
||
[4/18/2018 7:16 PM] kevpat
|
||
I got Ultra Violet & Side emitting LEDs coming for the Mouser sign. I think UV would look the cleanest. But having a colorful Bluetooth one where anyone could scan the bar code and play with different light configs on their phone would be fun also. Any opinions but anoying if its not on the outside of the wall. I suggest UV inside & Color RGB outside
|
||
|
||
|
||
[4/19/2018 1:43 AM] blackfire_tx9040
|
||
Anyone want to try to repair a UPS? It has, appearantly, a bad charging board that was taken out. I modified the board to allow for an external fuse w/o success in fixing the board.
|
||
|
||
|
||
[5/7/2018 2:03 PM] themitch22
|
||
https://mcuoneclipse.com/2018/05/05/sneak-preview-diy-smt-pick-place-machine-with-openpnp/amp/?__twitter_impression=true
|
||
|
||
{Embed}
|
||
https://mcuoneclipse.com/2018/05/05/sneak-preview-diy-smt-pick-place-machine-with-openpnp/amp/?__twitter_impression=true
|
||
Sneak Preview: DIY SMT Pick & Place Machine with OpenPnP
|
||
I apologize: I have not been blogging much in the past weeks :-(. One reason is that I’m working on a DIY SMT/SMD Pick&Place machine which keeps me busy most of my spare time :-). I admit…
|
||
https://images-ext-1.discordapp.net/external/f6aqr0yI1JRjdbPCJAodNZ7wijbwTN0KwiCu1cJPsV8/%3Fw%3D1200/https/mcuoneclipse.files.wordpress.com/2018/05/img_9924.jpg
|
||
|
||
|
||
[5/23/2018 3:21 PM] gothannie
|
||
Does anyone have a suggestion to where I could purchase solar panels (DIY small 9V) locally? I checked Tanners but they don't have one that large. Unless I missed it.
|
||
|
||
|
||
[5/24/2018 6:04 PM] adam1334
|
||
Harbor Freight sells some of what I'll call midsize panels, but I think they're 12V. Maybe a camping store, but you're likely to pay out the nose for them as they'll be productized.
|
||
|
||
|
||
[8/6/2018 12:05 PM] talkers
|
||
@VenomV you can get a higher voltage panel (like 12v-24v) and a Buck convertor (<$10) to bring the voltage down to 9v
|
||
|
||
|
||
[8/27/2018 8:28 AM] m9e
|
||
Does anyone know who might sell a 40 position 1mm pitch ffc ribbon cable locally?
|
||
|
||
|
||
[8/28/2018 3:45 PM] blameitontexas
|
||
@VenomV I have a couple
|
||
|
||
|
||
[9/25/2018 7:33 PM] emmathyst
|
||
Dang I'm just catching up since I've been inactive for awhile
|
||
|
||
|
||
[9/25/2018 7:33 PM] emmathyst
|
||
That openPnP machine looks awesome
|
||
|
||
|
||
[10/26/2018 1:10 PM] beren04342
|
||
i'm looking for a python tutor, bi-weekly, $20, 90 minute sessions
|
||
|
||
|
||
[10/26/2018 1:25 PM] canibalcrab
|
||
Yo. Let's not spam that any farther
|
||
|
||
|
||
[12/14/2018 5:31 PM] timooni
|
||
Hey, so I don't know if this was passed or if it was just being talked about
|
||
|
||
|
||
[12/14/2018 5:33 PM] timooni
|
||
but y'know that major victory for right to repair? Able to reverse engineer devices and software for the purposes of repair, in exception to any EULA / TOS / Copyright whatever
|
||
|
||
|
||
[12/14/2018 5:33 PM] timooni
|
||
for example, iphones / ipad DRM, john deere onboard computers, etc
|
||
|
||
|
||
[12/14/2018 5:35 PM] timooni
|
||
well i had this shower thought that this exception could be used for the development of repair techniques, or for larger groups to publish fixes for these devices so that as companies make the DRM more difficult to break, individuals don't have to reinvent the wheel. Larger groups can stay on top of it and make it easy.
|
||
|
||
|
||
[12/14/2018 5:37 PM] timooni
|
||
if it's legal for an individual to reverse engineer DRM to repair their device, is it also legal for a nonprofit to reverse engineer DRM for anyone to be able to repair the same device? I'd imagine so. If that's the case, we should totally do that. I think there are people here qualified to do stuff like that.
|
||
|
||
|
||
[1/17/2019 6:54 PM] dinkbatt
|
||
there's already quite a few how to fix websites and youtube channels that will provide detailed instructions on, well, pretty much anythign you would need to fix ever. https://www.ifixit.com/ for starters. among many others
|
||
|
||
{Embed}
|
||
https://www.ifixit.com/
|
||
iFixit: The Free Repair Manual
|
||
iFixit is a global community of people helping each other repair things. Let's fix the world, one device at a time. Troubleshoot with experts in the Answers forum—and build your own how-to guides to share with the world. Fix your Apple and Android devices—and buy all the ...
|
||
|
||
|
||
[1/17/2019 6:54 PM] dinkbatt
|
||
not sure if that's what you're referring to? a collection of information easily referencable?
|
||
|
||
|
||
[1/17/2019 10:31 PM] timooni
|
||
ifixit is a good resource yeah
|
||
|
||
|
||
[1/17/2019 10:31 PM] timooni
|
||
but i mean unofficial patches to circumvent apple drm for example
|
||
|
||
|
||
[1/17/2019 10:31 PM] timooni
|
||
we could develop them under the pretense of repairability
|
||
|
||
|
||
[1/20/2019 3:11 AM] dinkbatt
|
||
ohhhhhhhhhhhh
|
||
|
||
|
||
[1/20/2019 3:11 AM] dinkbatt
|
||
cough you mean like jailbreaking
|
||
|
||
|
||
[1/20/2019 3:12 AM] mizgeek
|
||
🙀
|
||
|
||
|
||
[1/20/2019 3:13 AM] dinkbatt
|
||
im pretty sure the jailbreaking gets released by anyone and everyone that can develop it as fast as possible. OS cracking is, well, a science and art whoever has a ridiculous amount of free time and experience to crack it. also some phones on the lower end of the android are just flat out not worth cracking due to low specs that make it usefulles for just about anything outside manufacturer intended tasks?
|
||
|
||
{Reactions}
|
||
💯
|
||
|
||
[1/20/2019 3:13 AM] dinkbatt
|
||
sorry not trying to overly criticize, just providing a feasiblity assemsement
|
||
|
||
|
||
[1/20/2019 3:14 AM] dinkbatt
|
||
like i've definitely done like 3/4 of a comp sci degree and jailbrekaing is not something volunteer workers can just knock out in a few sittings.
|
||
|
||
|
||
[1/31/2019 3:39 PM] timooni
|
||
I see ok
|
||
|
||
|
||
[3/3/2019 11:14 AM] randouser1
|
||
question, if you step down DC power with a buck converter... say a 12V 3A power supply to 5v with a buck converter rated for 3 amps
|
||
|
||
|
||
[3/3/2019 11:14 AM] randouser1
|
||
do you get 5V 3A?
|
||
|
||
|
||
[3/3/2019 11:15 AM] randouser1
|
||
curious as if stepping down power affects the available output current in any way
|
||
|
||
|
||
[3/3/2019 11:20 AM] canibalcrab
|
||
I'm pretty sure amps are pulled from the device using it
|
||
|
||
|
||
[3/3/2019 11:20 AM] canibalcrab
|
||
I don't play with buck/boosters though
|
||
|
||
|
||
[3/3/2019 11:20 AM] randouser1
|
||
right, just curious if the available is still 3A
|
||
|
||
|
||
[3/3/2019 11:20 AM] randouser1
|
||
say I have 3 fans that each require 1A
|
||
|
||
|
||
[3/3/2019 11:21 AM] randouser1
|
||
if I step down 12v to 5V for the fans, can I still power those 3 fans
|
||
|
||
|
||
[3/3/2019 11:21 AM] canibalcrab
|
||
The booster should have it detailed on the spec right?
|
||
|
||
|
||
[3/3/2019 11:21 AM] randouser1
|
||
all I can find is what it's rated ofr
|
||
|
||
|
||
[3/3/2019 11:21 AM] randouser1
|
||
for*
|
||
|
||
|
||
[3/3/2019 11:22 AM] canibalcrab
|
||
Dang
|
||
|
||
|
||
[4/9/2019 9:20 PM] doug.emes
|
||
So Pearce and I were talking about neopixels... I'm talking with my DPRG buddies and I think I might be able to implement a touch slide at best, or 2 touch buttons at worst for a mode up/down
|
||
|
||
|
||
[4/9/2019 9:40 PM] doug.emes
|
||
im digging into the 187 page guide now
|
||
|
||
|
||
[4/10/2019 12:11 AM] canibalcrab
|
||
im not totally sure i follow
|
||
|
||
|
||
[4/10/2019 12:12 AM] canibalcrab
|
||
actually im not even sure i know how the touch lamps work except that it has to be on a metal surface
|
||
|
||
|
||
[4/10/2019 12:39 AM] doug.emes
|
||
So on the nine dollar trinket board, it has 3 of the pins of the actual chip able to be used for capacitive touch
|
||
. One of those is also the direct memory access pin for driving the neopixels.
|
||
|
||
|
||
[4/10/2019 12:41 AM] doug.emes
|
||
But that still leaves us another normal gpio pin for another selection. So in theory one cap touch can be mode up, and the other mode down
|
||
|
||
|
||
[4/10/2019 12:42 AM] doug.emes
|
||
I tried updating to circuit python 3.x but lost my code, but I had it at home still so tomorrow night I should be able to virtually start fresh
|
||
|
||
|
||
[4/10/2019 12:42 AM] canibalcrab
|
||
interesting. i think id only need one though since all the sides are soldered together
|
||
|
||
|
||
[4/10/2019 12:43 AM] canibalcrab
|
||
but making any of my stained glass stuff cap touch activated sounds awesome
|
||
|
||
|
||
[4/10/2019 12:43 AM] doug.emes
|
||
If we try a strip of copper tape or what not, I should in theory be able to make a slider but I need to do some trsting
|
||
|
||
|
||
[4/10/2019 12:44 AM] doug.emes
|
||
Anyways I've got the hankering to figure this out
|
||
|
||
|
||
[4/10/2019 12:45 AM] canibalcrab
|
||
youd have to figure out how to turn a single large surface into a slider, like maybe have it compare between the two pins connected to the same surface
|
||
|
||
|
||
[4/10/2019 12:46 AM] doug.emes
|
||
Yes
|
||
|
||
|
||
[4/10/2019 11:08 AM] doug.emes
|
||
Ok I determined my prior code wasn't on circuit python but in arduino... which I already know how to do cases, so should have something this coming weekend. Right now I'm slammed with work learning all the new things in my new gig
|
||
|
||
|
||
[5/19/2019 6:28 PM] doug.emes
|
||
borrowed one standard PC power cord, will be bringing it back to lab at conclusion of software meet n geek
|
||
|
||
|
||
[6/24/2019 3:30 PM] Deleted User
|
||
https://www.youtube.com/watch?v=z71h9XZbAWY
|
||
|
||
{Embed}
|
||
Megaprocessor
|
||
https://www.youtube.com/watch?v=z71h9XZbAWY
|
||
Megaprocessor Tour 1 - (fixed audio)
|
||
I've finished building and testing the Megaprocessor. Here is a short tour showing what it's made of. (There was an error in the audio settings for the first...
|
||
https://images-ext-1.discordapp.net/external/4az94W9txy0eFk_smSYOHxVsToHC0t3gzCj5ympGtwE/https/i.ytimg.com/vi/z71h9XZbAWY/maxresdefault.jpg
|
||
|
||
|
||
[6/24/2019 6:55 PM] denzukoatwork2317
|
||
ALU.. Memory.. yeah that's got VCC written all over it.
|
||
|
||
|
||
[6/24/2019 6:55 PM] denzukoatwork2317
|
||
time to cross post 😉
|
||
|
||
|
||
[6/24/2019 6:57 PM] canibalcrab
|
||
thats awesome
|
||
|
||
|
||
[7/8/2019 4:09 PM] denzukoatwork2317
|
||
https://www.youtube.com/watch?v=l7rce6IQDWs
|
||
|
||
{Embed}
|
||
Ben Eater
|
||
https://www.youtube.com/watch?v=l7rce6IQDWs
|
||
The world's worst video card?
|
||
Let's build a circuit that displays an image on a VGA monitor! In this video, I talk about how VGA signals work and build a circuit that provides the correct...
|
||
https://images-ext-1.discordapp.net/external/5gcOzg41KKugnTpQtKB5P7dXCsRlJ_H8J0CfGVDYR7o/https/i.ytimg.com/vi/l7rce6IQDWs/maxresdefault.jpg
|
||
|
||
|
||
[7/8/2019 4:09 PM] denzukoatwork2317
|
||
I'm going to build one of these for the hell of it. but thinking of using fewer chips. (ie eeproms and 8bit or 12bit shift registers)
|
||
|
||
|
||
[7/8/2019 4:10 PM] denzukoatwork2317
|
||
any suggestion on chip models?
|
||
|
||
|
||
[7/8/2019 4:35 PM] denzukoatwork2317
|
||
maybe two pairs of sn74hc595 and 74ls163a, which then trigger logic on the eeprom. or would one still need a 74ls273?
|
||
|
||
|
||
[7/8/2019 4:35 PM] denzukoatwork2317
|
||
like shown in https://hackaday.io/project/20161/gallery#8425197f9672fd5b9318046303ae1c5c
|
||
|
||
{Embed}
|
||
https://hackaday.io/project/20161/gallery
|
||
Gallery | Breadboard VGA from TTL and EEPROM
|
||
Concept tester for VGA output using two old-skool EEPROM's and a handful of 74LS series TTL chips.
|
||
https://images-ext-1.discordapp.net/external/_5pJT7hsN_UFFXGlDQW_etFZJLWGBoVpH7Blf0waXKM/https/cdn.hackaday.io/images/7304091488585127379.jpg
|
||
|
||
|
||
[7/8/2019 5:09 PM] canibalcrab
|
||
Neat
|
||
|
||
|
||
[7/15/2019 12:03 PM] ruiner.eth
|
||
I've been waiting for that part 2 to come out
|
||
|
||
|
||
[7/15/2019 12:03 PM] ruiner.eth
|
||
I'm game
|
||
|
||
|
||
[7/15/2019 1:44 PM] denzukoatwork2317
|
||
oh this one: https://www.youtube.com/watch?v=uqY3FMuMuRo
|
||
|
||
{Embed}
|
||
Ben Eater
|
||
https://www.youtube.com/watch?v=uqY3FMuMuRo
|
||
World's worst video card? The exciting conclusion
|
||
For part 1, see this video: https://www.youtube.com/watch?v=l7rce6IQDWs Let's build a circuit that displays an image on a VGA monitor! In part 2, I talk abou...
|
||
https://images-ext-1.discordapp.net/external/sCfixvxZpq8ioWn5PFiRSP59H3vHV2Gk-cJJOTiy2yc/https/i.ytimg.com/vi/uqY3FMuMuRo/maxresdefault.jpg
|
||
|
||
|
||
[7/15/2019 1:44 PM] denzukoatwork2317
|
||
I've been waiting for it too
|
||
|
||
|
||
[7/15/2019 1:45 PM] denzukoatwork2317
|
||
I'll order up the parts if someone wants to put together the BOM then we can get a class on the calendar
|
||
|
||
|
||
[7/31/2019 9:31 AM] nullinterface
|
||
is the battery pack spot-welder in good working order?
|
||
|
||
|
||
[7/31/2019 9:57 AM] yashsedai
|
||
it is
|
||
|
||
|
||
[7/31/2019 9:57 AM] yashsedai
|
||
malcom uses it regularly 😃
|
||
|
||
|
||
[7/31/2019 10:02 AM] nullinterface
|
||
well then. I hear that lithium fires are a true sight to behold up close and in person.
|
||
|
||
|
||
[7/31/2019 11:05 AM] yashsedai
|
||
i'd be down
|
||
|
||
|
||
[7/31/2019 11:05 AM] yashsedai
|
||
we can do it at your house?
|
||
|
||
|
||
[7/31/2019 11:05 AM] yashsedai
|
||
ill stab the cell
|
||
|
||
|
||
[7/31/2019 12:11 PM] nullinterface
|
||
that would involve borrowing the battery spot welder, which probably isn't allowed. best to do it in the e-lab.
|
||
|
||
|
||
[10/9/2019 12:53 AM] aesthetys
|
||
Does anyone have experience programming z80 microprocessors?
|
||
|
||
|
||
[10/13/2019 1:37 PM] artg_dms8185
|
||
I did Z80 assembly pgmng a long while back. What do you want to do?
|
||
|
||
|
||
[10/15/2019 9:47 AM] thegrandpoobah6849
|
||
Hey guys, quick question. I'm needing to get some max7219 in short order for a Halloween costume. All the ones I'm finding on Amazon and ebay wouldn't be here for at least a month.
|
||
|
||
Do you guys have a website or a local place that might be useful?
|
||
|
||
|
||
[10/15/2019 10:09 AM] michaelb5250
|
||
Mouser has them in stock. Usually ground shipping takes a day or if you drive out to Mansfield you can do will call.
|
||
|
||
{Reactions}
|
||
👍 (2)
|
||
|
||
[10/15/2019 11:17 AM] nullinterface
|
||
E-Lab want to schedule an election sometime before the Board meeting?
|
||
|
||
|
||
[10/15/2019 12:03 PM] kenpurcell
|
||
Weirdly Amazon has max7219 chips and matrix displays with delivery available for tomorrow.
|
||
|
||
|
||
[10/15/2019 10:59 PM] artg_dms8185
|
||
Electronic Com Mtng Thurs Nov 7. It'll eventually make it to the Event Cal.....
|
||
|
||
{Reactions}
|
||
👍 (2)
|
||
|
||
[10/23/2019 6:49 PM] nullinterface
|
||
|
||
|
||
{Attachments}
|
||
https://cdn.discordapp.com/attachments/300062878676025344/636712942301216787/Screenshot_20191023-184700.png?ex=67b91122&is=67b7bfa2&hm=3a7670339472bb1b83014f6b2158440b67f62f11d5a32710fc31ca4d34ff82e5&
|
||
|
||
|
||
[10/23/2019 6:50 PM] nullinterface
|
||
Wow. 300 **Ah** in such a small package!
|
||
|
||
{Reactions}
|
||
doubt (2)
|
||
|
||
[10/24/2019 6:40 AM] kenpurcell
|
||
I'll take two and power my house.
|
||
|
||
|
||
[11/28/2019 8:16 PM] Deleted User
|
||
Quick question
|
||
|
||
|
||
[11/28/2019 8:19 PM] Deleted User
|
||
I have an Arduino Uno with a relay shield. I connected the positive of an extension cord in series with the relay contacts on the board and everything works fine when I'm plugged into the computer. As soon as I remove the USB, and connect it to a 5v power supply (board standard), the relays won't fire. The LEDs for the relays fire...but the relays themselves don't fire...any ideas?
|
||
|
||
|
||
[11/28/2019 8:25 PM] canibalcrab
|
||
I believe the relay board needs its own power. The 5v from a USB won't be enough to power it
|
||
|
||
|
||
[11/28/2019 8:42 PM] Deleted User
|
||
But it powers off of the USB
|
||
|
||
|
||
[11/28/2019 8:42 PM] Deleted User
|
||
Wouldn't the 5v be stronger than the USB
|
||
|
||
|
||
[11/28/2019 8:43 PM] canibalcrab
|
||
USB is going to be 5v and .05 amp unless you have a powered usb
|
||
|
||
|
||
[11/28/2019 8:43 PM] canibalcrab
|
||
I'm thinking you don't have the amps
|
||
|
||
|
||
[11/28/2019 8:44 PM] Deleted User
|
||
hmm...okay...so how would I go about powering the shield seperately?
|
||
|
||
|
||
[11/28/2019 8:44 PM] canibalcrab
|
||
Wall wart?
|
||
|
||
|
||
[11/28/2019 8:44 PM] Deleted User
|
||
What's that?
|
||
|
||
|
||
[11/28/2019 8:45 PM] Deleted User
|
||
Oh I just looked it up
|
||
|
||
|
||
[11/28/2019 8:46 PM] Deleted User
|
||
So...there's a bunch of pinouts on the relay shield...correct me if I'm wrong, but wouldn't it need to input into the VCC and GND pinout?
|
||
|
||
|
||
[11/28/2019 8:46 PM] canibalcrab
|
||
In theory once you have more power it will work since the led worked. That means it got the right code
|
||
|
||
|
||
[11/28/2019 8:48 PM] Deleted User
|
||
hmmm
|
||
|
||
|
||
[11/28/2019 8:48 PM] Deleted User
|
||
So what would be the suggestion? There isn't a spot for a power supply in.
|
||
|
||
|
||
[11/28/2019 8:49 PM] Deleted User
|
||
not on the relay shield, anyway
|
||
|
||
|
||
[11/28/2019 8:49 PM] canibalcrab
|
||
Gonna drive home then I can send pics
|
||
|
||
|
||
[11/28/2019 8:49 PM] Deleted User
|
||
ok
|
||
|
||
|
||
[11/28/2019 8:49 PM] Deleted User
|
||
I'll send media in the meantime
|
||
|
||
|
||
[11/28/2019 8:49 PM] canibalcrab
|
||
What Arduino are you using
|
||
|
||
|
||
[11/28/2019 8:50 PM] Deleted User
|
||
uno
|
||
|
||
|
||
[11/28/2019 8:51 PM] Deleted User
|
||
|
||
|
||
{Attachments}
|
||
https://cdn.discordapp.com/attachments/300062878676025344/649804547241410560/IMG_20191128_205006.jpg?ex=67b93ba4&is=67b7ea24&hm=61551ed803c097bd644d36f939ca10e9ea1acd2ae2f1edcee4426e64de03d1b4&
|
||
https://cdn.discordapp.com/attachments/300062878676025344/649804548256563200/IMG_20191128_205018.jpg?ex=67b93ba5&is=67b7ea25&hm=2765632e5a7ea06121b8fc90f0c14f95da082727b8df2d034af24f702c0c471b&
|
||
https://cdn.discordapp.com/attachments/300062878676025344/649804549120458782/IMG_20191128_205024.jpg?ex=67b93ba5&is=67b7ea25&hm=8f1872341d8c8535ab6192d539eb17b642bf40431d26f53edbd9551638a90553&
|
||
|
||
|
||
[11/28/2019 9:25 PM] michaelb5250
|
||
@Deleted User you plugged 5v into the black DC jack? Or did you use a USB charger?
|
||
|
||
|
||
[11/28/2019 9:36 PM] Deleted User
|
||
Well that's where the change happened
|
||
|
||
|
||
[11/28/2019 9:36 PM] Deleted User
|
||
it works when I have it in USB
|
||
|
||
|
||
[11/28/2019 9:36 PM] Deleted User
|
||
when I plug in the jack, the relays don't fire
|
||
|
||
|
||
[11/28/2019 9:47 PM] Deleted User
|
||
and yes, 5v
|
||
|
||
|
||
[11/28/2019 10:20 PM] michaelb5250
|
||
Few possibilities, where did you get the relay board from?
|
||
|
||
|
||
[11/28/2019 10:21 PM] michaelb5250
|
||
And keep in mind that DC jack isn't actually designed for 5v, it's meant for like 7-12v iirc. They have a 5v regulator on it, sonif you give it exactly 5v the regulator cant regulate and behaves unexpectedly
|
||
|
||
|
||
[11/28/2019 10:40 PM] Deleted User
|
||
HMMMM OK
|
||
|
||
|
||
[11/28/2019 10:40 PM] Deleted User
|
||
sorry for the caps
|
||
|
||
|
||
[11/28/2019 10:41 PM] Deleted User
|
||
So, do I need to remove the regulator?
|
||
|
||
|
||
[11/28/2019 10:41 PM] Deleted User
|
||
or get a different power supply to handle the entire pinned out board
|
||
|
||
|
||
[11/28/2019 11:28 PM] kevpat
|
||
Well usb is 3.3v if it likes that. Feed it that
|
||
|
||
|
||
[11/28/2019 11:33 PM] doug.emes
|
||
USB has NEVER been 3.3,
|
||
|
||
|
||
[11/29/2019 2:54 AM] talkers
|
||
@Deleted User you should be good just using a USB cable and power adapter. USB is 5v.
|
||
|
||
You really should not need a lot of amps for the relays. They are just magnetic switches.
|
||
|
||
|
||
[11/29/2019 8:21 AM] Deleted User
|
||
@john a gorman well that doesn't answer the issue at hand, which is that the relays won't fire, but the LED for the relay does. Makes no sense
|
||
|
||
|
||
[11/29/2019 8:24 AM] talkers
|
||
You were right that power isn't an issue if it works off the PC USB. As Pearce says, that's only 1/2 an amp
|
||
|
||
|
||
[11/29/2019 8:24 AM] talkers
|
||
I would look at the code
|
||
|
||
|
||
[11/29/2019 8:46 AM] michaelb5250
|
||
Where'd you get the relay board? This really depends on where the board gets its power from (Arduino provides 5v, 3.3v, and 'Vin' pins on its headers)
|
||
|
||
|
||
[11/29/2019 8:51 AM] talkers
|
||
@michaelb the relay shield should be pulling power off the uno board
|
||
|
||
|
||
[11/29/2019 8:51 AM] talkers
|
||
So it will pull what it needs
|
||
|
||
|
||
[11/29/2019 8:56 AM] michaelb5250
|
||
It matters which pin the relay board pulls from.
|
||
|
||
|
||
[11/29/2019 8:57 AM] michaelb5250
|
||
By providing 5v to the DC jack, the VIN and 5v pins will hover around 4.5v, and the 3.3v will still be 3.3.
|
||
|
||
|
||
[11/29/2019 8:57 AM] michaelb5250
|
||
So if it pulls power from 3.3v that's not the issue. If it's expecting 5v then it could have problems
|
||
|
||
|
||
[11/29/2019 2:28 PM] hon1nbo
|
||
What Michael said. The LED on the relay output may have enough power after the voltage drop, but the coil may not make an appropriate field strength.
|
||
|
||
{Reactions}
|
||
👌
|
||
|
||
[11/29/2019 5:13 PM] Deleted User
|
||
I mean the shield just stacks onto the Uno and pinouts all go through to the relay board
|
||
|
||
|
||
[11/29/2019 5:13 PM] Deleted User
|
||
So I'm not really sure. I'll grab my multi meter later and check it to see
|
||
|
||
|
||
[11/29/2019 5:16 PM] michaelb5250
|
||
If you know who you bought it from they might have the schematic available
|
||
|
||
|
||
[11/29/2019 5:17 PM] michaelb5250
|
||
But really the answer is find a 7-12v supply and try that.
|
||
|
||
|
||
[11/29/2019 5:24 PM] Deleted User
|
||
I mean it's an Arduino Uno and a Seeed Relay Shield
|
||
|
||
|
||
[11/29/2019 5:31 PM] Deleted User
|
||
But does that 7-12v power supply plug into the built in connector on the Uno?
|
||
|
||
|
||
[11/29/2019 6:31 PM] michaelb5250
|
||
Yeah the 7-12v plugs into the black DC jack on the uno
|
||
|
||
|
||
[11/29/2019 9:35 PM] Deleted User
|
||
Ok cool thanks. I'll have to track that down.
|
||
|
||
|
||
[1/17/2020 1:33 AM] denzuko5245
|
||
Random question, does one have to flash a fresh esp8266 esp01 or does the at command modes work out of the box with an ftdi board?
|
||
|
||
|
||
[1/17/2020 1:35 AM] denzuko5245
|
||
Ordered https://www.amazon.com/gp/product/B07NWD1TQM and just like the last attempt a few years ago I get zilch from the port but the device does seem to be "functioning" when tested with a multimeter.
|
||
|
||
|
||
[1/24/2020 12:37 AM] denzuko5245
|
||
take it that its an unknown. 😦
|
||
|
||
|
||
[2/15/2020 11:49 AM] pwnieluver
|
||
https://youtu.be/aScAZReGQc0
|
||
|
||
I wanna build on of these, and I don't wanna electrocute myself
|
||
|
||
{Embed}
|
||
GreatScott!
|
||
https://www.youtube.com/watch?v=aScAZReGQc0
|
||
HACKED!: CRT TV becomes a crude Oscilloscope
|
||
Support me for more videos: https://www.patreon.com/GreatScott
|
||
Previous video: https://youtu.be/CeStrH-5Llo
|
||
Facebook: https://www.facebook.com/greatscottlab
|
||
Twitter: https://twitter.com/GreatScottLab
|
||
Transistor Tester used in the video:
|
||
Amazon.de: http://amzn.to/2n6PM1l
|
||
Amaz...
|
||
https://images-ext-1.discordapp.net/external/feKo5RPhxfq_E5zSTscmc83AjL7_503sZ9KfLlzs8Y4/https/i.ytimg.com/vi/aScAZReGQc0/maxresdefault.jpg
|
||
|
||
|
||
[2/15/2020 2:09 PM] hon1nbo
|
||
It's pretty easy to do that may mod, and most CRTs have good isolation of the HV from what you'd want to mess with.
|
||
Since the tubes are typically replaceable, they are commonly using Spade connectors. You can pull one pair and if it is the vertical scan done, otherwise replace spades and grab the other pair
|
||
These units are fun, but unless you make a new driver for the X sweep you are limited in what you can do with it.
|
||
|
||
|
||
[2/15/2020 2:12 PM] canibalcrab
|
||
Crts are pretty easy to be careful with. There's one real big wire that attaches to the tube and transformer to watch out for
|
||
|
||
|
||
[2/15/2020 5:31 PM] kenpurcell
|
||
When I was 13 i switched the horizontal and vertical deflection guns so I could watch the tv in a mirror.
|
||
|
||
|
||
[2/15/2020 6:39 PM] hon1nbo
|
||
there's the big wire, but also the caps on the driver board for the flyback. Those can operate at intermediate voltages and be a little nasty
|
||
|
||
|
||
[2/16/2020 1:48 PM] nullinterface
|
||
saw a WEGA TV out on the curb the other day
|
||
|
||
|
||
[2/16/2020 1:48 PM] nullinterface
|
||
but odds are it's been rained on
|
||
|
||
|
||
[3/20/2020 3:55 PM] michaelb5250
|
||
!members
|
||
|
||
|
||
[3/20/2020 3:55 PM] dallas-makerspace#4763
|
||
There are currently 1868 members.
|
||
|
||
|
||
[3/20/2020 4:16 PM] ferricyanide7475
|
||
!
|
||
|
||
|
||
[3/20/2020 4:16 PM] ferricyanide7475
|
||
!members
|
||
|
||
|
||
[3/20/2020 4:16 PM] dallas-makerspace#4763
|
||
There are currently 1868 members.
|
||
|
||
|
||
[3/22/2020 2:19 AM] draco_the_drake
|
||
Forrest Mims III library
|
||
|
||
{Attachments}
|
||
https://cdn.discordapp.com/attachments/300062878676025344/691184247490478140/forrest_mims_iii.jpg?ex=67b8d1be&is=67b7803e&hm=bfee1f43897ec31d7d75382962307cdf22f95f743c0929721b4ae4528fa67391&
|
||
|
||
|
||
[3/22/2020 4:24 AM] hon1nbo
|
||
oh man I used to have a lot of those mini notebooks when I was a kid
|
||
|
||
|
||
[3/22/2020 4:41 AM] draco_the_drake
|
||
Me too .. it was what I looked through as a kid ... seeing all the circuits I could build .. some of them I had no idea about and others I built
|
||
|
||
|
||
[3/22/2020 4:42 AM] draco_the_drake
|
||
I can say I still don't know what a Monostable Multivibrator is... lol .. but it was in the books somewhere
|
||
|
||
|
||
[3/22/2020 4:50 AM] draco_the_drake
|
||
The other book that I had was a 74 series reference from TI .. thick book but had all kinds of parts and datasheets about what they did
|
||
|
||
|
||
[3/22/2020 9:53 PM] draco_the_drake
|
||
https://www.youtube.com/watch?v=LLsDq0cN2H8
|
||
|
||
{Embed}
|
||
SR electric
|
||
https://www.youtube.com/watch?v=LLsDq0cN2H8
|
||
Top 3 Electronics Project With BC547 transistor
|
||
Top 3 Electronics Project With BC547 transistor
|
||
|
||
Some ideas, And Experiment can be Dangerous.
|
||
And For that you don't Risk and Damage your self
|
||
and the Environment, I am a professional in my business
|
||
with a lot of experience!
|
||
Every video, even that is completed with complianc...
|
||
https://images-ext-1.discordapp.net/external/YGttCDVKoxJAEFU03Xdfcju7UX1HAYqOKnrdyrSTF2Y/https/i.ytimg.com/vi/LLsDq0cN2H8/maxresdefault.jpg
|
||
|
||
|
||
[3/24/2020 2:30 AM] james_david_vance
|
||
> like i've definitely done like 3/4 of a comp sci degree and jailbrekaing is not something volunteer workers can just knock out in a few sittings.
|
||
@SackOvRats (Brenly) if you're talking about jailbreaking devices, it's really easy, and you can even do it with an Android device, though not sure how practical: https://www.youtube.com/watch?v=tc0GqDueUIE
|
||
|
||
{Embed}
|
||
downthecrop
|
||
https://www.youtube.com/watch?v=tc0GqDueUIE
|
||
How to Jailbreak iOS with Android Phone checkra1n Tutorial Guide
|
||
A step by step guide of running the checkra1n iOS jailbreak with a rooted Android Phone. Use your Android Phone to Jailbreak your iPhone! Using the arm64 executable we are able to run checra1n exploit from an Android device to jailbreak an iOS device. I suggest running the exp...
|
||
https://images-ext-1.discordapp.net/external/RjrjDceUVDG6XBB8lpuMnxVpNs0QExHMI-EKytLSW44/https/i.ytimg.com/vi/tc0GqDueUIE/maxresdefault.jpg
|
||
|
||
|
||
[3/24/2020 2:33 AM] james_david_vance
|
||
> if it's legal for an individual to reverse engineer DRM to repair their device, is it also legal for a nonprofit to reverse engineer DRM for anyone to be able to repair the same device? I'd imagine so. If that's the case, we should totally do that. I think there are people here qualified to do stuff like that.
|
||
@Timooni
|
||
|
||
Here are some resources:
|
||
A really good guide for beginners (helped me get started): https://github.com/iosre/iOSAppReverseEngineering
|
||
https://iphonedevwiki.net/index.php/Main_Page
|
||
|
||
{Embed}
|
||
https://github.com/iosre/iOSAppReverseEngineering
|
||
iosre/iOSAppReverseEngineering
|
||
The world’s 1st book of very detailed iOS App reverse engineering skills :) - iosre/iOSAppReverseEngineering
|
||
https://images-ext-1.discordapp.net/external/b5nlOgTNAkVK9BxmuuOJcADx9skHQFAuKJ_sjWlDAb4/%3Fs%3D400%26v%3D4/https/avatars2.githubusercontent.com/u/6693854
|
||
|
||
{Embed}
|
||
https://iphonedevwiki.net/index.php/Main_Page
|
||
Main Page
|
||
|
||
|
||
[3/24/2020 2:34 AM] james_david_vance
|
||
@Timooni you can also ask people in #computer-committee which is for the computer committee
|
||
|
||
|
||
[3/24/2020 2:38 AM] canibalcrab
|
||
fixed. yall stop changing names.
|
||
|
||
{Reactions}
|
||
❤️ (2)
|
||
|
||
[3/25/2020 12:41 PM] james_david_vance
|
||
@pearce I actually wasn't asking for that but I appreciate it
|
||
|
||
|
||
[3/25/2020 1:06 PM] michaelb5250
|
||
!members
|
||
|
||
|
||
[3/25/2020 1:06 PM] dallas-makerspace#4763
|
||
There are currently 1807 members.
|
||
|
||
|
||
[3/27/2020 9:48 PM] michaelb5250
|
||
!members
|
||
|
||
|
||
[3/27/2020 9:48 PM] dallas-makerspace#4763
|
||
There are currently 1790 members.
|
||
|
||
|
||
[3/28/2020 9:41 PM] james_david_vance
|
||
Figured I cross-post this: https://talk.dallasmakerspace.org/t/virutal-dms-coder-night-dialogflow-walkthrough-w-james-henningson/70415
|
||
|
||
Post has more info, but James is doing a walkthrough of Dialogflow at the next DMS Coder Night on Tuesday at 7pm
|
||
|
||
|
||
[3/28/2020 11:50 PM] patrickpleez1
|
||
I’m looking for a long, thin, triangular bit. My solar battery tripped itself. And I need to reset it. But no external reset.
|
||
|
||
|
||
[3/29/2020 12:22 AM] canibalcrab
|
||
A tri tip driver bit?
|
||
|
||
|
||
[3/29/2020 12:23 AM] canibalcrab
|
||
I thought only Nintendo used those
|
||
|
||
|
||
[3/29/2020 1:33 AM] patrickpleez1
|
||
Nope. It’s in this damn solar box. I have them, just not thin enough.
|
||
|
||
|
||
[3/29/2020 1:34 AM] nullinterface
|
||
also, long and thin? I've seen those on ~⅛" precision kits but not on standalone screwdrivers.
|
||
|
||
|
||
[3/29/2020 1:34 AM] canibalcrab
|
||
post a pic of the screwhead
|
||
|
||
|
||
[3/29/2020 1:35 AM] nullinterface
|
||
Actually I've seen them on ¼" sets as well
|
||
|
||
|
||
[3/29/2020 1:37 AM] patrickpleez1
|
||
> post a pic of the screwhead
|
||
@pearce that may be hard. I’ll try.
|
||
|
||
|
||
[3/29/2020 1:38 AM] canibalcrab
|
||
?
|
||
|
||
{Attachments}
|
||
https://cdn.discordapp.com/attachments/300062878676025344/693710578602213376/unknown.png?ex=67b970d2&is=67b81f52&hm=23731ff67b31cf84a6d01eaac0fb4518a3aba6c11650a054e6891ba594494383&
|
||
|
||
|
||
[3/29/2020 1:38 AM] patrickpleez1
|
||
More of voided triangle.
|
||
|
||
|
||
[3/29/2020 1:38 AM] canibalcrab
|
||
hft appears to have triwing sets
|
||
|
||
{Attachments}
|
||
https://cdn.discordapp.com/attachments/300062878676025344/693710731971133520/unknown.png?ex=67b970f7&is=67b81f77&hm=88b9b8adf37ec891462007983ecb4b462b7f61fe2973ef8649afad8370b2ad9d&
|
||
|
||
|
||
[3/29/2020 1:40 AM] patrickpleez1
|
||
|
||
|
||
{Attachments}
|
||
https://cdn.discordapp.com/attachments/300062878676025344/693711080521859082/image0.jpg?ex=67b9714a&is=67b81fca&hm=96864208b05c0ec496aa2725ba4f8a821c1b6e8b69619c757fc1525f9ae4429c&
|
||
|
||
|
||
[3/29/2020 1:41 AM] patrickpleez1
|
||
These are them. Maybe harbor freight will have them.
|
||
|
||
|
||
[3/29/2020 1:41 AM] patrickpleez1
|
||
The length is my issue.
|
||
|
||
{Reactions}
|
||
LCEyebrows
|
||
|
||
[4/2/2020 5:26 PM] limeytx
|
||
Opinions? Repairable?
|
||
|
||
{Attachments}
|
||
https://cdn.discordapp.com/attachments/300062878676025344/695398671633875035/92241470_702290297181326_7170268860665298944_n.jpg?ex=67b8fd7b&is=67b7abfb&hm=ea101d6bbe72b25bd51dcd6e3cf285a24c6b42dd3aaaeec292e333c3524c137d&
|
||
|
||
|
||
[4/2/2020 5:26 PM] limeytx
|
||
|
||
|
||
{Attachments}
|
||
https://cdn.discordapp.com/attachments/300062878676025344/695398680408358922/92184834_769932860201923_8148975127262920704_n.jpg?ex=67b8fd7d&is=67b7abfd&hm=f2901a006960c22f3fbd5643e0ecb1ff910bbb904b6271b2c6df063e66fd6aff&
|
||
|
||
|
||
[4/2/2020 5:26 PM] limeytx
|
||
This isn't mine, its a friends who can't afford a new card, so he is wanting to try repair
|
||
|
||
|
||
[4/2/2020 5:41 PM] canibalcrab
|
||
Can you source the caps?
|
||
|
||
|
||
[4/2/2020 5:41 PM] canibalcrab
|
||
It looks like they are through hole, so it's possible
|
||
|
||
|
||
[4/2/2020 5:42 PM] canibalcrab
|
||
But if it's a multi layer board that's going to make it harder to get a good connection
|
||
|
||
|
||
[4/2/2020 5:47 PM] kenpurcell
|
||
When DMS reopens you should check the surface mount parts reels. I know you are looking for through hole but we may have these. Otherwise Mouser: https://www.mouser.com/ProductDetail/Panasonic/16SEPG270W?qs=sGAEpiMZZMsIwzbKW1rlgT%2FuUXYsF3eFp3kKFppACPaLJLK8zyEYPQ%3D%3D
|
||
|
||
|
||
[4/2/2020 8:29 PM] skyspook
|
||
Yea, that looks like a multilayer board. Can try replacing the Caps, but if there's internal corrosion it's boned.
|
||
|
||
|
||
[4/3/2020 5:13 PM] limeytx
|
||
Thanks, yeah the corrosion is my main concern here
|
||
|
||
|
||
[5/10/2020 12:29 PM] andrew5152
|
||
michaelb was kind enough to post this over on Talk
|
||
https://www.mouser.com/ProductDetail/Vishay-Semiconductors/IRFR9110PBF?qs=%2Fha2pyFadugQQbILjHmoo3kh%2FNLnP4FYxYisnf9PD5yO5Yk6SPESyQ%3D%3D&utm_source=octopart&utm_medium=aggregator&utm_campaign=844-IRFR9110PBF&utm_content=Vishay
|
||
on my inquiry
|
||
https://talk.dallasmakerspace.org/t/control-board-component-replacement-dummy-style/71154
|
||
and I'm considering it, but I'm wondering if anyone who bops along here more frequently than there might have a suggestion for where to get a few of these little guys (mouser's price is fine, but shipping from or driving to Mansfield isn't...all that palatable...)
|
||
|
||
{Embed}
|
||
https://talk.dallasmakerspace.org/t/control-board-component-replacement-dummy-style/71154
|
||
Control Board Component Replacement (Dummy Style!)
|
||
I have this circuit board It appears to have blown a…component. Any idea what this is? (I assume it’s like it’s buddy right next door) Any ideas where to get something like this (esp. right now)? Anyone want to virtually hold a (effectively) 4-year-old’s hand in what...
|
||
https://images-ext-1.discordapp.net/external/GXhj9Xh4y7GPQNz38tYT7Nx4sCBoGQeMqoLwDbwJc0M/https/dms-discourse-static.s3.dualstack.us-east-1.amazonaws.com/optimized/3X/4/5/459a3459f3d0e4633cef4ec6cabd7c5d3df33bdf_2_375x500.jpeg
|
||
|
||
|
||
[5/16/2020 11:36 PM] michaelb5250
|
||
While y'all were bickering I thought I might try and be productive
|
||
|
||
{Attachments}
|
||
https://cdn.discordapp.com/attachments/300062878676025344/711436969963421727/Capture.PNG?ex=67b9544f&is=67b802cf&hm=8389d64ce1f614f96d17569ea867f69e494e22abb7a2e730bc5bff9530196fe9&
|
||
|
||
|
||
[5/16/2020 11:37 PM] michaelb5250
|
||
Tomorrow we'll see if I'm brave enough to leave that 10mF cap on the output
|
||
|
||
|
||
[5/17/2020 12:05 AM] kentamanos
|
||
@michaelb what's it do? Is that KiCad?
|
||
|
||
|
||
[5/17/2020 12:09 AM] michaelb5250
|
||
Yeah, it's KiCad, I jumped over from eagle about a year after Autodesk went subscription based. It's got it's quirks but it works fine for the simple stuff I do.
|
||
|
||
|
||
[5/17/2020 12:10 AM] kentamanos
|
||
yeah, I don't do much, but when I do, I use KiCad. Haven't really done anything in 5 yet.
|
||
|
||
|
||
[5/17/2020 12:10 AM] michaelb5250
|
||
This is a not yet finished 5v power supply, 90-245Vac in. The goal here is 3A continuous output with as small a quiesscent power draw as possible. Hopefully under 0.1W at 240v.
|
||
|
||
|
||
[5/17/2020 12:12 AM] michaelb5250
|
||
Few things are working out if I really need the two giant 270uF input caps, it needs better output capacitance, figure out if it meets inrush specs, and I should probably check the diodes/fet since they're more or less just whatever mouser has the most stock of
|
||
|
||
|
||
[5/17/2020 12:13 AM] kentamanos
|
||
Having some issues with my current project. trying to use some MOSFET's to convert 3.3v PWM to 5v PWM for a LED strip for this thing: https://talk.dallasmakerspace.org/t/show-and-tell-may-2020/71025/11
|
||
|
||
{Embed}
|
||
https://talk.dallasmakerspace.org/t/show-and-tell-may-2020/71025/11
|
||
Show and Tell May 2020
|
||
Working on adding the D20 (which I bought from @PearceDunlap, who makes them) to my network as my first home automation device for testing. I replaced the normal controller on it with an ESP32 device (node-MCU) and made it output the common anode signals (just straight PWM, no...
|
||
https://images-ext-1.discordapp.net/external/EquBDurQ747dAeAsxFLRZJj9p5EM-m9knJ4J4yhJMjA/https/dms-discourse-static.s3.dualstack.us-east-1.amazonaws.com/optimized/3X/2/7/274fab62d8d0ebc62ea8df5ddbfaedb206ecda6f_2_653x500.png
|
||
|
||
|
||
[5/17/2020 12:14 AM] kentamanos
|
||
It's possible I just bought a completely wrong MOSFET (used a IRF520), but I can never get it to switch 5v (it's actually lower than the 3.3v)
|
||
|
||
|
||
[5/17/2020 12:14 AM] kentamanos
|
||
low frequency PWM too, knocked it down to about 100Hz, no difference
|
||
|
||
|
||
[5/17/2020 12:15 AM] kentamanos
|
||
I might try to simulate it on LTSpice etc. at some point, but I have to get back up to speed on all that stuff too (including importing a custom model for the part)
|
||
|
||
|
||
[5/17/2020 12:19 AM] michaelb5250
|
||
Yeah that's a power mosfet so it's really designed for a 10v Vgs. Any gate voltage below about 4v and you won't fully turn it on, which makes the design much more complicated.
|
||
|
||
|
||
[5/17/2020 12:19 AM] kentamanos
|
||
yeah, just randomly Google'd "3.3v pwm to 5v led strip" and I see someone whining about this exact MOSFET: https://www.raspberrypi.org/forums/viewtopic.php?t=261273
|
||
|
||
|
||
[5/17/2020 12:20 AM] kentamanos
|
||
clearly Mouser gave my newbie ass too many options 🙂
|
||
|
||
|
||
[5/17/2020 12:20 AM] michaelb5250
|
||
If I'm looking for a logic level fet I'll usually pull up the datasheet and look at the Rds(on) parameter. Not the value, but the test conditions. They spec Rds(on) at the Vgs they intend for you to run.
|
||
|
||
|
||
[5/17/2020 12:20 AM] michaelb5250
|
||
Logic level fets will have a spec at Vgs=3.3v for example.
|
||
|
||
|
||
[5/17/2020 12:21 AM] michaelb5250
|
||
And lol what I said earlier really is my method. What do they stock the most of. I.e, I'm not doing something special, and others know better, so what's everyone else buying.
|
||
|
||
|
||
[5/17/2020 12:23 AM] kentamanos
|
||
yeah, I watched the Digikey video series on KiCad, and when sourcing parts (obviously on Digikey), he just sorted by what they had the most stock of, and his reasoning was they stock what sells...hehe
|
||
|
||
|
||
[5/17/2020 12:25 AM] michaelb5250
|
||
So here's a sparkfun level shifter, they're using a BSS138: http://cdn.sparkfun.com/datasheets/BreakoutBoards/Logic_Level_Bidirectional.pdf
|
||
|
||
If you don't want surface mount, adafruit sells a 'Logic Level N channel fet', the IRLB8721.
|
||
|
||
Obviously mouser sells both parts.
|
||
|
||
|
||
[5/17/2020 12:26 AM] michaelb5250
|
||
Also, that level shifter works in both directions and is a neat little trick with mosfets.
|
||
|
||
|
||
[5/17/2020 12:27 AM] kentamanos
|
||
I randomly ran across something on Amazon and solder'd one up (I probably need to test connections on it, because I suck at soldering): https://smile.amazon.com/gp/product/B07LG646VS/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1
|
||
|
||
|
||
[5/17/2020 12:28 AM] kentamanos
|
||
Not sure exactly what mosfet that uses, let me see if I can read it...
|
||
|
||
|
||
[5/17/2020 12:32 AM] kentamanos
|
||
|
||
|
||
{Attachments}
|
||
https://cdn.discordapp.com/attachments/300062878676025344/711451113509093408/IMG_20200517_003011.jpg?ex=67b9617b&is=67b80ffb&hm=08f07fce53c69e873a2b9590f1dc4dcfff22a5ab3a76c45982d74c1fd6c44076&
|
||
|
||
|
||
[5/17/2020 12:34 AM] kentamanos
|
||
Looks like one of these https://www.ebay.com.au/itm/KSA1298-J1Y-30V-800mA-200mW-PNP-General-Purpose-Silicon-Transistor-SMD-SOT-23-ON-/362722388191
|
||
|
||
{Embed}
|
||
https://www.ebay.com.au/itm/KSA1298-J1Y-30V-800mA-200mW-PNP-General-Purpose-Silicon-Transistor-SMD-SOT-23-ON-/362722388191
|
||
KSA1298 J1Y 30V 800mA 200mW PNP General Purpose Silicon Transistor ...
|
||
SMD Transistor Code: J1Y. Maximum Power Dissipation (Pd): 200mW. Polarity: PNP. Type Designator: Silicon Transistor. Type of Transistor: General Purpose Switching. Emitter-Base |Vdc|: 5V. Collector Current | Ic | : 200mA.
|
||
https://images-ext-1.discordapp.net/external/el9ImDySCNQkGmhIWA-zGNvU4U1t_rAHzm1EKx8rJD0/https/i.ebayimg.com/images/g/WiIAAOSwz9BdTgyd/s-l400.jpg
|
||
|
||
|
||
[5/17/2020 12:35 AM] kentamanos
|
||
https://www.mouser.com/ProductDetail/ON-Semiconductor-Fairchild/KSA1298YMTF?qs=ljbEvF4DwOPmgba0q87XWg%3D%3D
|
||
|
||
|
||
[5/17/2020 12:36 AM] michaelb5250
|
||
That would be surprising. It looks like a copy of the sparkfun circuit (with a different transistor), and I don't think that circuit works with a PNP transistor.
|
||
|
||
|
||
[5/17/2020 12:36 AM] kentamanos
|
||
I think I got what I paid for on the price etc...hehe
|
||
|
||
|
||
[5/17/2020 12:37 AM] kentamanos
|
||
good soldering practice for the header pins I guess...I need it 🙂
|
||
|
||
|
||
[5/17/2020 12:43 AM] kentamanos
|
||
very similar markings on their parts too: https://cdn.sparkfun.com//assets/parts/8/5/2/2/12009-07.jpg
|
||
|
||
{Embed}
|
||
https://cdn.sparkfun.com//assets/parts/8/5/2/2/12009-07.jpg
|
||
https://images-ext-1.discordapp.net/external/KlQNRWL-tjnmBAYPGwmB4Tk7QJFW2eYjoWeJ3jJqm8c/https/cdn.sparkfun.com/assets/parts/8/5/2/2/12009-07.jpg
|
||
|
||
|
||
[5/17/2020 12:48 AM] kentamanos
|
||
hmmm, time to dig thru my bins:
|
||
|
||
{Attachments}
|
||
https://cdn.discordapp.com/attachments/300062878676025344/711455053009125409/unknown.png?ex=67b96526&is=67b813a6&hm=9e6048d2f1de0374affe7e7f0d0fd1e19c934248dd01982086085a4833c5a758&
|
||
|
||
|
||
[5/17/2020 1:12 AM] themitch22
|
||
I am trying to learn kicad but I need to learn electronics first
|
||
|
||
|
||
[5/17/2020 1:13 AM] themitch22
|
||
I might just start with a simple break out board
|
||
|
||
|
||
[5/17/2020 2:41 AM] kentamanos
|
||
FWIW later Michael, I found a model and simulated it in LTSpice. 3.3v definitely doesn't fit the bill (blue is voltage at drain, green is PWM of 3.3v):
|
||
|
||
{Attachments}
|
||
https://cdn.discordapp.com/attachments/300062878676025344/711483470492467210/unknown.png?ex=67b8d6de&is=67b7855e&hm=e229a58a56d80c137508a574d36e031f0b17da61457398d01bc175e4e87aaf07&
|
||
|
||
|
||
[5/17/2020 2:42 AM] kentamanos
|
||
I don't seem to get decent results until around 4v:
|
||
|
||
{Attachments}
|
||
https://cdn.discordapp.com/attachments/300062878676025344/711483716186144778/unknown.png?ex=67b8d718&is=67b78598&hm=df031de9815260112f11494aef201299a6da6d647533c70f086f9e0e4ff94314&
|
||
|
||
|
||
[5/17/2020 2:43 AM] kentamanos
|
||
Please excuse my laziness on not putting in a proper schematic symbol for the MOSFET...hehe
|
||
|
||
|
||
[5/17/2020 2:49 AM] kentamanos
|
||
I'll find a replacement instead of the IRLB8721, because everyone seems to be...
|
||
|
||
|
||
[5/17/2020 2:49 AM] kentamanos
|
||
out
|
||
|
||
{Attachments}
|
||
https://cdn.discordapp.com/attachments/300062878676025344/711485472328908820/unknown.png?ex=67b8d8bb&is=67b7873b&hm=eb9077d2438d61afc5709870f322ce59600f3b8dd54da3eb311d8291dfa521f3&
|
||
|
||
|
||
[5/17/2020 2:49 AM] kentamanos
|
||
of
|
||
|
||
{Attachments}
|
||
https://cdn.discordapp.com/attachments/300062878676025344/711485522333270066/unknown.png?ex=67b8d8c7&is=67b78747&hm=a46915b63a3aae3a29dffca14d7028f3698413b96869e896dc74679852a76eb6&
|
||
|
||
|
||
[5/17/2020 2:49 AM] kentamanos
|
||
stock
|
||
|
||
{Attachments}
|
||
https://cdn.discordapp.com/attachments/300062878676025344/711485571020619786/unknown.png?ex=67b8d8d2&is=67b78752&hm=32c8438f6d46a3eab5ebeaaaa2499ae1f8f8b3dd9c521cde641138a2358edaa3&
|
||
|
||
|
||
[5/17/2020 2:49 AM] kentamanos
|
||
🤣
|
||
|
||
|
||
[5/21/2020 9:51 AM] michaelb5250
|
||
I keep hearing a rumor that electronics has a Flir, any idea what model?
|
||
|
||
|
||
[5/21/2020 10:32 AM] kenpurcell
|
||
Nope but it lives on the top shelf on the center bench in a black case. Hmm, not on the wiki https://dallasmakerspace.org/wiki/Tools#Electronics
|
||
|
||
{Embed}
|
||
https://dallasmakerspace.org/wiki/Tools
|
||
Tools
|
||
|
||
|
||
[5/21/2020 10:34 AM] michaelb5250
|
||
Damn. There's a new Flir that's tempting me https://www.flir.com/products/c5/
|
||
|
||
Was curious what we had at the space.
|
||
|
||
{Embed}
|
||
https://www.flir.com/products/c5/
|
||
With the FLIR C5 in your pocket you’ll be ready anytime to find hot fuses, air leaks, plumbing issues, and more. Identifying hidden problems is easy with the 160 x 120 (19,200 pixels) true thermal imager, MSX® (Multi-Spectral Dynamic Imaging), 5-megapixel visual camera, and LE...
|
||
|
||
|
||
[5/21/2020 11:05 AM] kenpurcell
|
||
Ours looks like this model https://www.flir.com/products/tg165/
|
||
|
||
{Embed}
|
||
https://www.flir.com/products/tg165/
|
||
The FLIR TG165 Spot Thermal Cameras bridge the gap between single spot infrared thermometers and FLIR's legendary thermal cameras. Equipped with FLIR's exclusive Lepton® micro thermal sensor, these cameras let you see the heat so you know exactly where to target the measuremen...
|
||
|
||
|
||
[5/21/2020 12:08 PM] andrew5152
|
||
This company's name always makes me chuckle, because it's pronounced (as close as matters to me) the same as the Bubble Gum Company Fleer. https://en.wikipedia.org/wiki/Fleer
|
||
Which immediately causes me to say (usually to myself) "Fleer Funnies - Starring Pud!"
|
||
https://www.worthpoint.com/worthopedia/1930s-fleer-dubble-bubble-comics-1815862692
|
||
|
||
{Embed}
|
||
https://en.wikipedia.org/wiki/Fleer
|
||
Fleer
|
||
The Fleer Corporation, founded by Frank H. Fleer in 1885, was the first company to successfully manufacture bubble gum; it remained a family-owned enterprise until 1989.
|
||
Fleer originally developed a bubble gum formulation called Blibber-Blubber in 1906. However, while this gum...
|
||
https://images-ext-1.discordapp.net/external/vw_OTvq81w3eUjLzmff3gf0Sj9HOFiDuT4tQh2t6MfU/https/upload.wikimedia.org/wikipedia/commons/thumb/6/6a/Fleer_Logo.svg/1200px-Fleer_Logo.svg.png
|
||
|
||
{Embed}
|
||
https://www.worthpoint.com/worthopedia/1930s-fleer-dubble-bubble-comics-1815862692
|
||
SHIPPING TO US ONLYRare to find 1930's Fleer Dubble Bubble comic No. 107 drawn by Joe Bowers, who also created the Pud comics after these. Please check out my other listings for more lots of these. Fr
|
||
|
||
|
||
[5/21/2020 12:09 PM] andrew5152
|
||
https://www.flickr.com/photos/60585948@N00/6063080592
|
||
|
||
{Embed}
|
||
grickily
|
||
https://www.flickr.com/photos/60585948@N00/6063080592
|
||
Fleer Funnies comic w/ Toast'Em Animals ad
|
||
I have seen a lot of odd things through the years but this one threw me for a loop. I bought a nice load of about 500 bubble gum comics and there in the midst of them all was this comic. Seemingly an ad for the short lived product Toast'Em Animals pastries (like Pop-Tarts). ...
|
||
https://images-ext-1.discordapp.net/external/jvHXVUMSU8ttejduLdbCbRfItCkFxpsnjSFw2LLWK7g/https/live.staticflickr.com/6066/6063080592_8983a468a4_b.jpg
|
||
|
||
|
||
[5/25/2020 5:45 PM] nullinterface
|
||
no sympathy for the frog
|
||
|
||
{Attachments}
|
||
https://cdn.discordapp.com/attachments/300062878676025344/714610148097785876/unknown.png?ex=67b90210&is=67b7b090&hm=193989198e5cf969769e9da0abe9bcf7449b8a7512e323acbd64a4acd84af1b4&
|
||
|
||
|
||
[5/25/2020 6:50 PM] michaelb5250
|
||
The real tragedy is assuming DC will cause something to 'kick violently'.
|
||
|
||
|
||
[5/25/2020 6:58 PM] themitch22
|
||
You could make a reciprocating motor if you use a reed switch and tie a magnet to the foot
|
||
|
||
|
||
[5/25/2020 6:59 PM] themitch22
|
||
Until the muscles run out of electrolytes and
|
||
|
||
|
||
[5/25/2020 7:02 PM] michaelb5250
|
||
Quick, Erik, if Mitch put a reed switch/magnet on the foot, what value capacitor would I need to put in parallel with the inductor to limit the frog foot vibrations to 10 hurt-z?
|
||
|
||
|
||
[5/25/2020 7:53 PM] nullinterface
|
||
how fast can someone to open and close the switch? if you incentivize them with money?
|
||
|
||
|
||
[5/25/2020 8:06 PM] michaelb5250
|
||
The inductor and capacitor naturally oscillate so once the switch is opened the foot would convulse a few times at their natural frequency and eventually dissipate all the energy and stop.
|
||
|
||
|
||
[5/30/2020 9:28 PM] kentamanos
|
||
Opened up an extra remote and repurposing it for home automation usage. Original power was 3v coin cell but tolerates 3.3v just fine. Seen people run them on 5v as well from Arduinos. Sending it serial commands to "press" the buttons right now, but eventually will be REST calls making it open garage, workshop, and gate.
|
||
|
||
{Attachments}
|
||
https://cdn.discordapp.com/attachments/300062878676025344/716478281771122728/IMG_20200530_212257.jpg?ex=67b93665&is=67b7e4e5&hm=5f63cba4c8607cb9b721cedd04a00ec40b9ddcff865e688234cb142cee02ba8f&
|
||
|
||
{Reactions}
|
||
❤️ (2)
|
||
|
||
[6/7/2020 9:29 AM] Deleted User
|
||
I need help selecting an amp for my new passive speakers. The speakers say the amplifier power should be 10-150 watts. I did some research and an internet guy said you should get 1.5X the wattage for each channel. But he also said to ignore the maximum wattage. So Should I get 15 watts per channel or 225? The speakers have a nominal impedance of 4 ohms, so I think I need to get an amp that does 4 ohms per channel.
|
||
|
||
Here are the specs:
|
||
|
||
{Attachments}
|
||
https://cdn.discordapp.com/attachments/300062878676025344/719196325505400882/Screenshot_20200607-092904.jpg?ex=67b93686&is=67b7e506&hm=fde852ffb8c58961f7081fd30c5716d2903be32f0456c59c717f7fb1560ceeac&
|
||
|
||
|
||
[6/7/2020 9:30 AM] Deleted User
|
||
They're the Audioengine HDP6
|
||
https://drop.com/buy/audio-engine-p6-speakers?utm_source=appshare&referer=B2E2PV
|
||
|
||
{Embed}
|
||
https://drop.com/buy/audio-engine-p6-speakers?utm_source=appshare&referer=B2E2PV
|
||
Audioengine HDP6 Speakers | Price & Reviews | Drop (formerly Massdrop)
|
||
Drop exclusive price and reviews: Audioengine HDP6 Speakers | 250+ Sold | Fusing old-school style with modern technology, the Audioengine HDP6 speakers pair...
|
||
https://images-ext-1.discordapp.net/external/gmHS-WQAt7HlWohx6UILg0jf0rju08mbstALJRvja64/%3Fauto%3Dformat%26fm%3Djpg%26fit%3Dcrop%26w%3D600%26h%3D315%26bg%3Df0f0f0%26dpr%3D1/https/massdrop-s3.imgix.net/product-images/audio-engine-p6-speakers/FP/IieHOH08RJWNNCdMMZV6_pc.png
|
||
|
||
|
||
[6/19/2020 5:26 PM] peasandclams
|
||
Electronics noob here. I'm on the search for a surface mount 330 ohm resistor. Trying to get a project done before the weekend... ends. Any chance there's somewhere I could source one that soon?
|
||
|
||
|
||
[6/19/2020 5:28 PM] peasandclams
|
||
Feel free to @ me with suggestions
|
||
|
||
|
||
[6/19/2020 5:28 PM] michaelb5250
|
||
What size?
|
||
|
||
|
||
[6/19/2020 5:34 PM] peasandclams
|
||
That part I don't think I know.
|
||
|
||
|
||
[6/19/2020 5:35 PM] peasandclams
|
||
Not sure if this helps, but it's going in a Nintendo DS Lite
|
||
|
||
{Attachments}
|
||
https://cdn.discordapp.com/attachments/300062878676025344/723667330764374087/Screenshot_20200619-173514_YouTube.jpg?ex=67b8ffb8&is=67b7ae38&hm=6483fba74a99eb1772cf5a4d3e217b4a13d6f4ce9cf4a9dcb6750385aa57f01f&
|
||
|
||
|
||
[6/22/2020 11:16 PM] chocolatelasagna
|
||
Mouser has same day will call pickup
|
||
|
||
|
||
[6/22/2020 11:16 PM] chocolatelasagna
|
||
Or maybe next day (depends when u get order in). They are cheap so you could buy 3 or 4 sizes
|
||
|
||
|
||
[6/22/2020 11:17 PM] peasandclams
|
||
:doomthonk:
|
||
I was looking at ordering them online.
|
||
|
||
|
||
[6/22/2020 11:21 PM] chocolatelasagna
|
||
Yeah I mean could always get an Amazon kit next day delivered.
|
||
|
||
|
||
[6/22/2020 11:21 PM] chocolatelasagna
|
||
But yeah idk other than the drive will call is fun , it's like Amazon same day but for silicon 🤓
|
||
|
||
|
||
[6/22/2020 11:22 PM] chocolatelasagna
|
||
Hell get a thru hole, insulate the leads, solder it in and smash that thing inside the enclosure. BAM surface mount
|
||
|
||
|
||
[6/23/2020 9:36 AM] peasandclams
|
||
I wound up getting what i needed from a friend.
|
||
|
||
{Attachments}
|
||
https://cdn.discordapp.com/attachments/300062878676025344/724996280857919618/20200622_185910.jpg?ex=67b93827&is=67b7e6a7&hm=b6ac1f5fd884446a744ff6d836a0ca4f08151ae59357260f542a9cbe2f05815e&
|
||
|
||
|
||
[6/23/2020 9:36 AM] peasandclams
|
||
Will definitely order some of these though.
|
||
|
||
|
||
[6/24/2020 11:31 PM] aceat64
|
||
I need to drain a 12v car battery down to 10v, any suggestions on how to do that without having to periodically check on it?
|
||
|
||
|
||
[6/24/2020 11:33 PM] michaelb5250
|
||
Lol uhhh... odd
|
||
|
||
|
||
[6/24/2020 11:33 PM] michaelb5250
|
||
There's an electronic load in science that can probably do that. Set a current limit, constant voltage mode for 10v.
|
||
|
||
|
||
[6/24/2020 11:38 PM] aceat64
|
||
the manufacturer wants me to do it to recondition the battery
|
||
|
||
|
||
[6/24/2020 11:39 PM] aceat64
|
||
it's a deep cycle AGM
|
||
|
||
|
||
[6/24/2020 11:49 PM] michaelb5250
|
||
Ahh well yeah I'd set up the load for a current limit of like 0.5 or 1C, constant voltage of 10v and let it run.
|
||
|
||
|
||
[6/24/2020 11:49 PM] michaelb5250
|
||
I said science. I meant electronics. Big black 4U rack mount unit on the shelves near the personal storage bin. BK Precision something or other.
|
||
|
||
|
||
[6/24/2020 11:51 PM] aceat64
|
||
cool
|
||
|
||
|
||
[6/25/2020 1:06 AM] hon1nbo
|
||
Yeah that load tester unit is awesome and perfect for something like that
|
||
|
||
|
||
[6/25/2020 10:50 AM] skyspook
|
||
A proper deep cycle charger should have a recondition cycle you can run that should do the same thing
|
||
|
||
|
||
[7/1/2020 11:22 PM] michaelb5250
|
||
This time the bickering was long enough I actually started a layout. Toying with using some scrap IGBT modules as a load bank.
|
||
|
||
{Attachments}
|
||
https://cdn.discordapp.com/attachments/300062878676025344/728103268244520960/Capture.PNG?ex=67b95102&is=67b7ff82&hm=e557baca17dbb5a30ba38326b9570dbddc9a8f96e9c472c2004dae05e89705fe&
|
||
|
||
|
||
[7/2/2020 12:19 AM] kentamanos
|
||
I have kind of a stupid electronics question: can you buy small pre-made electromagnets? Basically a small piece of ferrous metal wrapped in "magnet wire". I have an idea for something I want to try out, but I might not want to hand wrap LOTS of them myself. I've read about some people trying to use inductors for such a job, but having a hard time telling if that really works. It's also a seemingly hard thing to Google successfully or find on Mouser. Technically this could be called a solenoid I THINK, but most of those results include the moving actuator type piece.
|
||
|
||
|
||
[7/2/2020 8:09 AM] skyspook
|
||
Try searching for "holding magnet"
|
||
|
||
|
||
[7/2/2020 8:09 AM] skyspook
|
||
Or similar. I see adafruit sells some, and ebay has similar. Depends on what holding force you need
|
||
|
||
|
||
[7/2/2020 8:42 AM] nullinterface
|
||
solenoids are going to be optimized for moving the plunger
|
||
|
||
|
||
[7/2/2020 9:07 AM] nullinterface
|
||
generally a hollow form with a sprung ferrous mass that pulls the mass into it against the spring with the actuator itself being pulled in or pushed out depending on orientation
|
||
|
||
|
||
[7/2/2020 9:59 AM] kentamanos
|
||
@ESmith Ah, "plunger" is a better term. The weird part seems to be TECHNICALLY a solenoid doesn't have to include that plunger but all the practical searches for that word include it. I think I need very little force, but a lot of them. I'm thinking about using them to push away a permanent magnet for a "pen up" operation on a polar bot type plotter (like Brandon's Gocupi back in the day). @Skyspook I'll look around for "holding magnets" and that seems to be a better search term, but the combination of size and prize might scare me off. I don't think need them to be as strong as most offerings etc. and might just have to wind my own (which would be a lot of them if they seem like they'd work).
|
||
|
||
|
||
[7/2/2020 10:02 AM] nullinterface
|
||
solenoids are generally used for short linear *binary* motion applications - power door locks, car starters, appliance safety locks, sprinkler valves - thus the plunger is a natural accessory
|
||
|
||
|
||
[7/2/2020 10:07 AM] nullinterface
|
||
a bit lost on your desire to push a magnet around when a more conventional plunger seems simpler and likely to fit within turnkey solutions out there in the market
|
||
|
||
|
||
[7/2/2020 10:08 AM] nullinterface
|
||
most solenoids that I've seen are of two styles: cylindrical or square. both concentrate the magnetic field inside the housing containing the windings.
|
||
|
||
|
||
[7/2/2020 10:10 AM] nullinterface
|
||
in a previous career I designed some gear that used solenoids for pneumatic valves as well as releasing spring-loaded catches
|
||
|
||
|
||
[7/2/2020 10:12 AM] nullinterface
|
||
rotary actuators are another style I occasionally considered; they spare the designer the need to devise a mechanism to shoehorn a linear solenoid into such an application
|
||
|
||
|
||
[7/2/2020 10:13 AM] nullinterface
|
||
I recall they also applied force more predictably and more consistently through the range of motion
|
||
|
||
|
||
[7/2/2020 10:13 AM] nullinterface
|
||
anyway - I'm babbling
|
||
|
||
|
||
[7/2/2020 11:00 AM] kentamanos
|
||
Ideally, I want it to be physically contact free. Most people do the "pen up" with a servo for instance (and a solenoid could also be used here), but that servo "scratches" previous dry erase work while it moves around (even if it has a very small contact point). Would be cool to push it away by ramping up electromagnets (not really levitating, just pushing away from the mostly vertical board) and then bring it back down by ramping electromagnets back down. This also means no power wires running to the stylus (or batteries) for a solenoid/servo. Not sure of the practicality overall, but I want to try an array of these magnets for this job.
|
||
|
||
|
||
[7/2/2020 11:24 AM] nullinterface
|
||
if you're not manipulating the pen up/down electrically then how are you doing it?
|
||
|
||
|
||
[7/2/2020 11:38 AM] kentamanos
|
||
electromagnets behind the board in theory repulsing a permanent magnet. No idea if it will work etc, but want to try it.
|
||
|
||
|
||
[7/2/2020 11:38 AM] kentamanos
|
||
would in theory cause it to swing away, allow it to move and then come back down
|
||
|
||
|
||
[7/2/2020 11:39 AM] kentamanos
|
||
it's either this or compressed air on the stylus...hehe
|
||
|
||
|
||
[7/2/2020 11:45 AM] kenpurcell
|
||
??? Magnetic sheet behind the board with one electromagnet on the draw head, or permanent magnet on drawing head and a ton of electromagnets behind the board?
|
||
|
||
|
||
[7/2/2020 11:47 AM] kenpurcell
|
||
sounds similar in idea of flip discs that have a tiny electromagnet to swap contrasting sides.
|
||
|
||
|
||
[7/2/2020 12:02 PM] nullinterface
|
||
now the need for a great quantity of electromagnets makes sense
|
||
|
||
|
||
[7/2/2020 12:20 PM] hardsuit
|
||
Thus is reminding me of a coffee table concept I want to build
|
||
|
||
|
||
[7/2/2020 12:20 PM] hardsuit
|
||
Glass top, and has a dungeon maze diorama inside
|
||
|
||
|
||
[7/2/2020 12:21 PM] kentamanos
|
||
@Lampy (Ken Purcell) 2nd one, small permanent on the stylus and an array I can potentially activate groups of magnets behind the board. Very similar to those sorts of displays etc.
|
||
|
||
|
||
[7/2/2020 12:21 PM] hardsuit
|
||
Have a 2 axis arm underneath to magnetically move around monster and adventurer mini figs
|
||
|
||
|
||
[7/2/2020 12:22 PM] kentamanos
|
||
yeah, I have considered a "mirror stylus" so to speak behind the board I could activate like that
|
||
|
||
|
||
[7/2/2020 12:22 PM] kentamanos
|
||
could hook up to the same motors etc. and therefore be in the same spot
|
||
|
||
|
||
[7/2/2020 12:23 PM] kentamanos
|
||
that's starting to sound better 🙂
|
||
|
||
|
||
[7/2/2020 12:23 PM] kentamanos
|
||
makes the whole thing a bit thicker though
|
||
|
||
|
||
[7/2/2020 12:23 PM] kentamanos
|
||
(deeper might be better word here)
|
||
|
||
|
||
[7/2/2020 12:24 PM] kentamanos
|
||
fairly sure I couldn't make a huge electromagnet the size of the entire white board and get the results I want, right?
|
||
|
||
|
||
[7/2/2020 12:34 PM] kenpurcell
|
||
hm interesting. Take some masonite pegboard, press in some metal sleeves and wind magnet wire around each pin. Wonder if you could weave it like core memory and have it work.
|
||
|
||
|
||
[7/2/2020 12:41 PM] kentamanos
|
||
that's a good idea too. Much more scalable than what I was thinking
|
||
|
||
|
||
[7/2/2020 12:52 PM] kenpurcell
|
||
just the "resolution" is fixed by the pegboard unless you drill your own on smooth masonite
|
||
|
||
|
||
[7/2/2020 12:52 PM] kentamanos
|
||
yeah, I think I just need to buy a crapload of "magnet wire" for now 😉
|
||
|
||
|
||
[7/2/2020 12:52 PM] kentamanos
|
||
at least that's cheap
|
||
|
||
|
||
[7/9/2020 10:37 AM] slinkygn
|
||
on the unlikely off chance that anybody knows off the top of their heads: in our random piles of SMD tape, are there any 0605 (or within spitting distance of) RGB LEDs?
|
||
|
||
|
||
[7/9/2020 10:37 AM] slinkygn
|
||
A couple of them died out on a project board I have, and I'd rather pay the bin than drive all the way down to Mouser for 2 bucks worth of parts 🙂
|
||
|
||
|
||
[7/9/2020 10:38 AM] slinkygn
|
||
1615, if you prefer what some would call non-moonwalker units 🙂
|
||
|
||
|
||
[7/9/2020 12:00 PM] themitch22
|
||
Not addressable?
|
||
|
||
|
||
[7/9/2020 12:02 PM] themitch22
|
||
From my understanding there is not really an organization of the smd reels in electronics. I'm sure if someone volunteered to do that, it would help.
|
||
|
||
|
||
[7/9/2020 1:16 PM] kenpurcell
|
||
^ no org of most parts. Never saw addressable LEDs when we first got the donation.
|
||
|
||
|
||
[7/9/2020 1:20 PM] kentamanos
|
||
is common anode vs common cathode also a thing in that sort of package?
|
||
|
||
|
||
[7/9/2020 1:22 PM] kenpurcell
|
||
I usually only saw that in the four pin 10mm round packages
|
||
|
||
|
||
[7/9/2020 1:22 PM] kenpurcell
|
||
Always bought the wrong version
|
||
|
||
|
||
[7/9/2020 9:10 PM] slinkygn
|
||
yes, nonaddressable -- just dumb RGB LEDs, I don't need controllers embedded or otherwise 🙂 I'm not sure I've ever seen an 0605 addressable RGB LED!
|
||
|
||
|
||
[7/9/2020 9:11 PM] slinkygn
|
||
And yes, most of those SMD reels have been strewn about the Electronics space since basically the dawn of time 🙂 I kinda figured it would just be dumb luck if somebody had bothered to sift through them at some point, likely looking for something else, and happened to have seen them.
|
||
|
||
|
||
[7/10/2020 10:34 PM] michaelb5250
|
||
|
||
|
||
{Attachments}
|
||
https://cdn.discordapp.com/attachments/300062878676025344/731352714021437440/20200710_223352.gif?ex=67b945ca&is=67b7f44a&hm=33fc11da02bc81817f39663ef323526717339f779ab27d0308ba312c1a31b70d&
|
||
|
||
{Reactions}
|
||
🧐
|
||
|
||
[7/10/2020 10:35 PM] michaelb5250
|
||
Remember, always be filming when you flip the switch.
|
||
|
||
|
||
[7/10/2020 10:35 PM] michaelb5250
|
||
I've since fixed the explody bit, this was a one off.
|
||
|
||
|
||
[7/10/2020 10:35 PM] andrew5152
|
||
youuuuuuuuuu sunk my battleship?
|
||
|
||
|
||
[7/10/2020 11:45 PM] themitch22
|
||
@michaelb Electroboom re-enactment?
|
||
|
||
|
||
[7/11/2020 12:49 AM] michaelb5250
|
||
Unintentionally, yeah 😂
|
||
|
||
|
||
[7/13/2020 8:20 AM] hon1nbo
|
||
|
||
|
||
{Attachments}
|
||
https://cdn.discordapp.com/attachments/300062878676025344/732224951620468756/IMG_20200713_081512.jpg?ex=67b92660&is=67b7d4e0&hm=3e45f6ca1b891e958f0e55677157404bb48074adb6dfad0089ef685faa4f8f92&
|
||
|
||
|
||
[7/13/2020 8:20 AM] hon1nbo
|
||
IR surface mount solder flow machine
|
||
|
||
|
||
[7/13/2020 8:20 AM] hon1nbo
|
||
All functional except monitor has faded output but readable
|
||
|
||
|
||
[7/13/2020 8:20 AM] hon1nbo
|
||
$500
|
||
|
||
|
||
[7/13/2020 8:20 AM] hon1nbo
|
||
Has to go this week
|
||
|
||
|
||
[7/13/2020 10:30 PM] slinkygn
|
||
oh, man
|
||
|
||
|
||
[7/13/2020 10:30 PM] slinkygn
|
||
is it too late for electronics to petition for more space? 😆
|
||
|
||
|
||
[7/13/2020 10:47 PM] judykriehn3727
|
||
Shut up. You'll start Art harping about moving the personal storage bins again. When THERE ISN'T ANYWHERE TO MOVE THEM. Not that I'm bitter or anything.
|
||
|
||
{Reactions}
|
||
👆
|
||
|
||
[7/13/2020 10:50 PM] canibalcrab
|
||
also as much as that would be cool, its limited use to the space as a whole. like the pick and place machines
|
||
|
||
|
||
[7/13/2020 11:13 PM] hon1nbo
|
||
indeed
|
||
|
||
|
||
[7/13/2020 11:13 PM] hon1nbo
|
||
more if someone personally is interested
|
||
|
||
|
||
[7/13/2020 11:13 PM] hon1nbo
|
||
and is willing to run a 60A 208 3ph circuit for it
|
||
|
||
|
||
[7/14/2020 7:54 AM] slinkygn
|
||
You shouldn't say that. I meet both those criteria. 😁
|
||
|
||
|
||
[7/14/2020 7:56 AM] slinkygn
|
||
I mean, I bet within a month we could get more people using it than have been certified on and able to use the HAAS over the past year... 😁
|
||
|
||
|
||
[7/14/2020 8:59 AM] michaelb5250
|
||
|
||
|
||
{Attachments}
|
||
https://cdn.discordapp.com/attachments/300062878676025344/732597068056625282/e02e5ffb5f980cd8262cf7f0ae00a4a9_press-x-to-doubt-memes-memesuper-la-noire-doubt-meme_419-238.jpg?ex=67b92f70&is=67b7ddf0&hm=c517da54dfaed952ffa6295e08d9fcc0c80c70df13d1e569a1df6efc1b1f5657&
|
||
|
||
|
||
[7/14/2020 9:02 AM] michaelb5250
|
||
We already have a reflow oven in electronics, not sure why we'd need a second one.
|
||
|
||
|
||
[7/14/2020 9:10 AM] kenpurcell
|
||
🏆 Especially when we have already handled much of the very $$$ electrical work.
|
||
|
||
|
||
[7/14/2020 11:01 AM] hon1nbo
|
||
> We already have a reflow oven in electronics, not sure why we'd need a second one.
|
||
@michaelb we do? Where?
|
||
Is it buried under the mountain of black and yellow bins?
|
||
|
||
|
||
[7/14/2020 11:10 AM] michaelb5250
|
||
It's an already-modified T962A sitting on top of the workbench next to the wire shelves.
|
||
|
||
|
||
[7/14/2020 12:18 PM] slinkygn
|
||
https://imgur.com/gallery/rYd4I/comment/1227577419
|
||
|
||
{Embed}
|
||
https://imgur.com/gallery/rYd4I/comment/1227577419
|
||
That's not a knife
|
||
https://images-ext-1.discordapp.net/external/0LjI3kUcOKPb1h84CD1HbEwwjT7qqgPyWZckKwc8OH4/https/i.imgur.com/cC16aXG.gif
|
||
|
||
|
||
[7/14/2020 12:24 PM] slinkygn
|
||
Comparing an ETS conveyor machine to a T962A is comparing a Haas to (edit) an X-carve
|
||
|
||
|
||
[7/14/2020 12:30 PM] michaelb5250
|
||
I mean those are indeed two CNCs
|
||
|
||
|
||
[7/14/2020 12:31 PM] michaelb5250
|
||
Purchasing a Haas when you don't even use your X-carve is a pretty big waste of money.
|
||
|
||
|
||
[7/14/2020 12:33 PM] slinkygn
|
||
If you have stuff you can do with the X-carve, sure -- but that's not usually how people buy stuff.
|
||
|
||
|
||
[7/14/2020 12:34 PM] slinkygn
|
||
You have a need, so you buy the thing that fits it -- not you buy a thing and hope your need fits it.
|
||
|
||
|
||
[7/14/2020 12:34 PM] slinkygn
|
||
Purchasing an X-carve because you want to mill billet aluminum but can't afford a Haas is a pretty big waste of money.
|
||
|
||
|
||
[7/14/2020 12:35 PM] slinkygn
|
||
The two aren't actually comparable.
|
||
|
||
|
||
[7/14/2020 12:36 PM] michaelb5250
|
||
You can, if it's the only tool you have, well you might as well try. Having the shiny toys doesn't make you any better at doing something.
|
||
|
||
|
||
[7/14/2020 12:36 PM] michaelb5250
|
||
Fact is, we have a reflow oven. It's the right price and size for us. We have no need for a large commercial oven
|
||
|
||
|
||
[7/14/2020 12:37 PM] michaelb5250
|
||
Waiting for it to heat up, having to panelize your PCBs so they fit in the conveyor, taking up all that space in an already crowded committee area, which one of these are the benefits that you think the large machine will bring us?
|
||
|
||
|
||
[7/14/2020 12:39 PM] michaelb5250
|
||
As for your 'more people will use this than use the Haas' comment, many more requests show up for the Haas on talk. I see many more people using it. Many more people have projects on the Haas.
|
||
|
||
|
||
[7/14/2020 12:40 PM] michaelb5250
|
||
There's only a small portion of the space that would even have a project that requires a reflow oven. So much so that people don't even ask if we have one or how to use it.
|
||
|
||
|
||
[7/14/2020 2:54 PM] slinkygn
|
||
That's highly unlikely, considering how few people are certified on the HAAS and the fact that it is (supposed to be?) keylocked out. So if you're seeing all that many people using it they probably need to be reported.
|
||
|
||
|
||
[7/14/2020 2:55 PM] slinkygn
|
||
Last I checked the AD list and crossed it with active members, I think I got a result set 2 long.
|
||
|
||
|
||
[7/14/2020 2:56 PM] slinkygn
|
||
Whereas people may not ask about the reflow oven is because many people check the official reference for the tools available in e-lab -- in which the reflow oven isn't listed.
|
||
|
||
|
||
[7/14/2020 2:57 PM] slinkygn
|
||
That list has in recent history (1-2yrs or so) been pretty well kept up, at least compared to other committees. Anything that wasn't on there was usually broken.
|
||
|
||
|
||
[7/14/2020 2:58 PM] slinkygn
|
||
Which, as a matter of fact, was the state of the reflow oven we had there a few years back. I assume the one we're talking about isn't the same one? Or it got fixed, or something?
|
||
|
||
|
||
[7/14/2020 2:58 PM] slinkygn
|
||
I would imagine it's a different one, as the old one was a member's, I think.
|
||
|
||
|
||
[7/14/2020 2:58 PM] michaelb5250
|
||
Many more than two people are currently trained on the Haas.
|
||
|
||
|
||
[7/14/2020 2:59 PM] michaelb5250
|
||
Let me ask you this, how many projects do you know of that required a reflow oven?
|
||
|
||
|
||
[7/14/2020 2:59 PM] slinkygn
|
||
Trained and active, is what I checked.
|
||
|
||
|
||
[7/14/2020 2:59 PM] hon1nbo
|
||
AD does not have the Haas user list
|
||
|
||
|
||
[7/14/2020 2:59 PM] hon1nbo
|
||
it never has
|
||
|
||
|
||
[7/14/2020 2:59 PM] hon1nbo
|
||
it has those who have taken the classes
|
||
|
||
|
||
[7/14/2020 2:59 PM] hon1nbo
|
||
but not those who completed the practical
|
||
|
||
|
||
[7/14/2020 2:59 PM] slinkygn
|
||
Require? Few. Could use? Every single PCB project that goes through the E-lab.
|
||
|
||
|
||
[7/14/2020 2:59 PM] hon1nbo
|
||
the Haas RFID lockout was made before the AD list and integration was setup
|
||
|
||
|
||
[7/14/2020 2:59 PM] hon1nbo
|
||
it uses an offline BeagleBone with an internal RFID database
|
||
|
||
|
||
[7/14/2020 3:00 PM] hon1nbo
|
||
it's never been transitioned to anything else
|
||
|
||
|
||
[7/14/2020 3:00 PM] michaelb5250
|
||
😂😂 well that's just wrong.
|
||
|
||
|
||
[7/14/2020 3:00 PM] slinkygn
|
||
It has like four different HAAS groups. And again, HAAS at least used to be keylocked against one of those AD lists.
|
||
|
||
|
||
[7/14/2020 3:00 PM] hon1nbo
|
||
dude, I'm the admin over AD
|
||
|
||
|
||
[7/14/2020 3:00 PM] hon1nbo
|
||
those AD groups aren't the actual operators groups
|
||
|
||
|
||
[7/14/2020 3:00 PM] slinkygn
|
||
There was a sync between Beagle one and that.
|
||
|
||
|
||
[7/14/2020 3:00 PM] hon1nbo
|
||
and I literally was working on its beaglebone the other daty
|
||
|
||
|
||
[7/14/2020 3:00 PM] hon1nbo
|
||
no, there isn't
|
||
|
||
|
||
[7/14/2020 3:00 PM] hon1nbo
|
||
they're manually added
|
||
|
||
|
||
[7/14/2020 3:00 PM] michaelb5250
|
||
Barely any pcbs that go through DMS could even use a commercial reflow oven. I doubt many could use the desktop one.
|
||
|
||
|
||
[7/14/2020 3:01 PM] hon1nbo
|
||
we in fact have a student that can't be added right now because the instructor couldn't SSH into the unit
|
||
|
||
|
||
[7/14/2020 3:01 PM] hon1nbo
|
||
since they have to be added manually
|
||
|
||
|
||
[7/14/2020 3:01 PM] slinkygn
|
||
Are you positive? When I worked on the Chinese entry system I was pretty sure I was sitting on the code that synced that.
|
||
|
||
|
||
[7/14/2020 3:01 PM] hon1nbo
|
||
positive
|
||
|
||
|
||
[7/14/2020 3:01 PM] hon1nbo
|
||
literally the person that runs the network right now
|
||
|
||
|
||
[7/14/2020 3:01 PM] slinkygn
|
||
Fair enough.
|
||
|
||
|
||
[7/14/2020 3:01 PM] hon1nbo
|
||
sets up our current gen interlocks
|
||
|
||
|
||
[7/14/2020 3:01 PM] slinkygn
|
||
I know, Jim. :)
|
||
|
||
|
||
[7/14/2020 3:01 PM] hon1nbo
|
||
and is a machine shop teacher
|
||
|
||
|
||
[7/14/2020 3:02 PM] hon1nbo
|
||
the code for the chinese system pushes stuff from MM to the door controllers internal database
|
||
|
||
|
||
[7/14/2020 3:02 PM] hon1nbo
|
||
but the BB isn't on that and doesn't support it with the existing code
|
||
|
||
|
||
[7/14/2020 3:02 PM] slinkygn
|
||
I am having trouble imagining a PCB project that couldn't use a reflow oven.
|
||
|
||
|
||
[7/14/2020 3:02 PM] slinkygn
|
||
What, are people allergic to solder paste?
|
||
|
||
|
||
[7/14/2020 3:03 PM] slinkygn
|
||
No, of course not. This was years ago when we were trying to integrate the new system in.
|
||
|
||
|
||
[7/14/2020 3:03 PM] michaelb5250
|
||
People are allergic to surface mount for one
|
||
|
||
|
||
[7/14/2020 3:03 PM] slinkygn
|
||
New back then.
|
||
|
||
|
||
[7/14/2020 3:03 PM] michaelb5250
|
||
Kit PCBs don't come panelized to fit through a commercial oven.
|
||
|
||
|
||
[7/14/2020 3:03 PM] slinkygn
|
||
I've seen *plenty* of SMD projects in e-lab.
|
||
|
||
|
||
[7/14/2020 3:03 PM] slinkygn
|
||
You think that hot air tool goes unused?
|
||
|
||
|
||
[7/14/2020 3:04 PM] michaelb5250
|
||
It's not worth the trouble to run up such a big oven for your one board.
|
||
|
||
|
||
[7/14/2020 3:04 PM] slinkygn
|
||
Anything that can use the hot air tool can use the toy reflow oven.
|
||
|
||
|
||
[7/14/2020 3:04 PM] michaelb5250
|
||
But not the giant one you want.
|
||
|
||
|
||
[7/14/2020 3:04 PM] hon1nbo
|
||
there's a difference between a hobby scale reflow oven and a conveyor system
|
||
|
||
|
||
[7/14/2020 3:04 PM] hon1nbo
|
||
meant for assembly lines
|
||
|
||
|
||
[7/14/2020 3:05 PM] slinkygn
|
||
Okay, I'm getting whiplash here. Two arguments at once is enough, I'm not gonna do three. Are you standing by the statement that nobody does nearly anything that could use the reflow oven presently there? Or are you criticizing the desire for the big oven?
|
||
|
||
|
||
[7/14/2020 3:05 PM] michaelb5250
|
||
It's not going to be any faster if you're doing multiple anyways. You'll still be hand printing paste and hand placing components.
|
||
|
||
|
||
[7/14/2020 3:06 PM] michaelb5250
|
||
Alright, let's pick one. We don't need to replace our desktop over a commercial one.
|
||
|
||
|
||
[7/14/2020 3:06 PM] michaelb5250
|
||
And go.
|
||
|
||
|
||
[7/14/2020 3:07 PM] slinkygn
|
||
We also used to have a small pick-n-place machine in there.
|
||
|
||
|
||
[7/14/2020 3:07 PM] slinkygn
|
||
Oh, that's easy.
|
||
|
||
|
||
[7/14/2020 3:07 PM] slinkygn
|
||
Read back at my "requests" that we pick it up, and "request" that we expand the E-lab space for it, and look at all the laugh emoji by them.
|
||
|
||
|
||
[7/14/2020 3:08 PM] michaelb5250
|
||
You mean your claim that it'll get more use than the Haas?
|
||
|
||
|
||
[7/14/2020 3:08 PM] michaelb5250
|
||
Oh is this going to be one of those 'I won't admit I'm wrong so I'll just play like it was sarcasm' things?
|
||
|
||
|
||
[7/14/2020 3:08 PM] michaelb5250
|
||
Let's find out.
|
||
|
||
|
||
[7/14/2020 3:09 PM] slinkygn
|
||
And realize when you took something WAY too seriously - and expanded that to a scope where there *is* a legitimate argument against what you're saying, which is that a reflow oven would nearly never be used.
|
||
|
||
|
||
[7/14/2020 3:09 PM] hon1nbo
|
||
no one has said a reflow oven would never be used
|
||
|
||
|
||
[7/14/2020 3:09 PM] slinkygn
|
||
Did you notice the emoji attached to that claim too? Or are you intentionally being obtuse.
|
||
|
||
|
||
[7/14/2020 3:09 PM] hon1nbo
|
||
the statement has always been said "conveyor" system
|
||
|
||
|
||
[7/14/2020 3:09 PM] yashsedai
|
||
omg more pedant competition
|
||
|
||
|
||
[7/14/2020 3:09 PM] slinkygn
|
||
Nearly never? Yes, he did, nearly verbatim.
|
||
|
||
|
||
[7/14/2020 3:09 PM] slinkygn
|
||
And repeatedly.
|
||
|
||
|
||
[7/14/2020 3:09 PM] hon1nbo
|
||
I know, seems like there's been stiff competition for the big D
|
||
|
||
|
||
[7/14/2020 3:09 PM] hon1nbo
|
||
except he didn't
|
||
|
||
|
||
[7/14/2020 3:09 PM] hon1nbo
|
||
quote it
|
||
|
||
|
||
[7/14/2020 3:09 PM] hon1nbo
|
||
with context
|
||
|
||
|
||
[7/14/2020 3:10 PM] hon1nbo
|
||
showing that he wasn't talking about that large commercial conveyor unit
|
||
|
||
|
||
[7/14/2020 3:10 PM] slinkygn
|
||
Seriously?
|
||
|
||
|
||
[7/14/2020 3:10 PM] slinkygn
|
||
Sure.
|
||
|
||
|
||
[7/14/2020 3:10 PM] michaelb5250
|
||
> Ahh yes, the good old 'it was just sarcasm dude' defense.
|
||
|
||
|
||
[7/14/2020 3:10 PM] slinkygn
|
||
> Fact is, we have a reflow oven. It's the right price and size for us. We have no need for a large commercial oven
|
||
@michaelb > Let me ask you this, how many projects do you know of that required a reflow oven?
|
||
@michaelb
|
||
|
||
|
||
[7/14/2020 3:10 PM] slinkygn
|
||
Skipped one
|
||
|
||
|
||
[7/14/2020 3:11 PM] yashsedai
|
||
omg nobody cares
|
||
|
||
|
||
[7/14/2020 3:11 PM] slinkygn
|
||
> There's only a small portion of the space that would even have a project that requires a reflow oven. So much so that people don't even ask if we have one or how to use it.
|
||
@michaelb
|
||
|
||
|
||
[7/14/2020 3:11 PM] hon1nbo
|
||
> Fact is, we have a reflow oven. It's the right price and size for us. We have no need for a large commercial oven
|
||
@michaelb this for context
|
||
|
||
|
||
[7/14/2020 3:11 PM] michaelb5250
|
||
If you read what I said, 'We already have a reflow oven, don't know why we'd need a second one' At which point you came at me for trying to compare the two.
|
||
|
||
{Reactions}
|
||
💯
|
||
|
||
[7/14/2020 3:11 PM] slinkygn
|
||
"a reflow oven" was always used to include the small one.
|
||
|
||
|
||
[7/14/2020 3:11 PM] yashsedai
|
||
where is my low orbit ion cannon when i need it
|
||
|
||
{Reactions}
|
||
dumpsterfire
|
||
|
||
[7/14/2020 3:11 PM] slinkygn
|
||
Conveyor was specifically used to talk about the big one, yes, as was "the large machine."
|
||
|
||
|
||
[7/14/2020 3:12 PM] slinkygn
|
||
It was always specified.
|
||
|
||
|
||
[7/14/2020 3:13 PM] slinkygn
|
||
> If you read what I said, 'We already have a reflow oven, don't know why we'd need a second one' At which point you came at me for trying to compare the two.
|
||
@michaelb no, you wrote six more messages after that. I quoted the most relevant ones.
|
||
|
||
|
||
[7/14/2020 3:13 PM] hon1nbo
|
||
and like we've said, we have no use for the large machine. we've never said we do zero reflow work or it's not useful to have at all
|
||
|
||
|
||
[7/14/2020 3:13 PM] slinkygn
|
||
I could quote the entire thing, if you like. Or you could just reread it.
|
||
|
||
|
||
[7/14/2020 3:13 PM] slinkygn
|
||
Of course we don't.
|
||
|
||
|
||
[7/14/2020 3:13 PM] hon1nbo
|
||
but to say we can justify a large commercial unit is just laughable
|
||
|
||
|
||
[7/14/2020 3:13 PM] slinkygn
|
||
Nobody did, Jim.
|
||
|
||
|
||
[7/14/2020 3:14 PM] hon1nbo
|
||
@michaelb has constantly been refuting how people won't want to panelize their small hobby projects for a conveyor, we have a unit that's the right size for us, etc
|
||
|
||
|
||
[7/14/2020 3:14 PM] michaelb5250
|
||
I did re-read it, I made that one statement, and then you started talking this crap about Haas vs X-Carve
|
||
|
||
|
||
[7/14/2020 3:14 PM] slinkygn
|
||
Christ.
|
||
|
||
|
||
[7/14/2020 3:14 PM] slinkygn
|
||
With a Crocodile Dundee meme.
|
||
|
||
|
||
[7/14/2020 3:14 PM] slinkygn
|
||
CLEARLY SUPER SERIOUS
|
||
|
||
|
||
[7/14/2020 3:14 PM] hon1nbo
|
||
whatever, I'm done. wants to argue for the sake of arguing because we won't get a stupid piece of machinery that's useless for a makerspace
|
||
|
||
|
||
[7/14/2020 3:15 PM] slinkygn
|
||
No, he didn't even mention panelizing until about 15 minutes ago, Jim. What have you been reading?
|
||
|
||
|
||
[7/14/2020 3:15 PM] hon1nbo
|
||
clearly knows how the other equipment here works, totally doesn't need to listen to us
|
||
|
||
|
||
[7/14/2020 3:15 PM] michaelb5250
|
||
Ahh, again 'lol dude chill it was only sarcasm!' said after three pages of argument. 🙄
|
||
|
||
|
||
[7/14/2020 3:15 PM] hon1nbo
|
||
lawl the entire argument? I posted the original link
|
||
|
||
|
||
[7/14/2020 3:15 PM] slinkygn
|
||
Other than that part I quoted.
|
||
|
||
|
||
[7/14/2020 3:15 PM] hon1nbo
|
||
and Michael was with me are the warehouse that had it
|
||
|
||
|
||
[7/14/2020 3:15 PM] hon1nbo
|
||
literally the start of the discussion
|
||
|
||
|
||
[7/14/2020 3:16 PM] hon1nbo
|
||
anyway I'm done; getting close to D levels of pedantry
|
||
|
||
|
||
[7/14/2020 3:16 PM] Deleted User
|
||
> I mean, I bet within a month we could get more people using it than have been certified on and able to use the HAAS over the past year... 😁
|
||
@slinkygn (George) really seems like this all came about because you misunderstood HAAS permissions...
|
||
|
||
|
||
[7/14/2020 3:16 PM] slinkygn
|
||
Sorry, lost connectivity for about 60secs there, catching up.
|
||
|
||
|
||
[7/14/2020 3:16 PM] slinkygn
|
||
Really, the grin didn't give anything away?
|
||
|
||
|
||
[7/14/2020 3:16 PM] Deleted User
|
||
nope
|
||
|
||
|
||
[7/14/2020 3:17 PM] slinkygn
|
||
That was a crack on the fact that we haven't been able to recruit HAAS trainers, which has been a problem for literally years. Which you should know perfectly well, Jim.
|
||
|
||
|
||
[7/14/2020 3:17 PM] slinkygn
|
||
Sorry, that wasn't Jim. Speed reading.
|
||
|
||
|
||
[7/14/2020 3:17 PM] michaelb5250
|
||
We have 3 or 4 people teaching the Haas right now.
|
||
|
||
|
||
[7/14/2020 3:17 PM] michaelb5250
|
||
You really need to chill until you get up to date.
|
||
|
||
|
||
[7/14/2020 3:18 PM] slinkygn
|
||
Trust me, the one putting in emoji and Crock Dundee memes didn't need to chill. Then, anyway. Because he wasn't seriously advocating for a tool that would literally take up half of E-lab to be brought in.
|
||
|
||
|
||
[7/14/2020 3:19 PM] slinkygn
|
||
And if anyone unclear on obviously sardonic statements had, say, *asked if I was serious* instead of presuming a call to war and overstating their case, this would certainly have been avoided.
|
||
|
||
|
||
[7/14/2020 3:20 PM] slinkygn
|
||
Maybe a class on 3d printing paste screens based off kicad plans is what's needed here. Who knows.
|
||
|
||
|
||
[7/14/2020 3:20 PM] slinkygn
|
||
Aka
|
||
|
||
|
||
[7/14/2020 3:21 PM] Deleted User
|
||
So why are you so triggered now if it's all a joke?
|
||
|
||
|
||
[7/14/2020 3:21 PM] slinkygn
|
||
@yashsedai I think I found your low orbital ion cannon when I found who shot Crocodile Dundee.
|
||
|
||
|
||
[7/14/2020 3:21 PM] hon1nbo
|
||
*metaphorically; it would not literally take up half the e-lab
|
||
and yet kept justifying how it would get more use than the haas, clearly showing a lack of understanding on how our tools are used, claiming the haas doesn't have teachers. Like you keep justifying the machine, yet claiming you're just being sarcastic (sorry, couldn't resist chiming back in. really wish I had some popcorn here)
|
||
|
||
|
||
[7/14/2020 3:21 PM] michaelb5250
|
||
Sorry, I forgot. It was always a joke now that you've lost the argument.
|
||
|
||
|
||
[7/14/2020 3:21 PM] slinkygn
|
||
Seriously, memes and emoji.
|
||
|
||
|
||
[7/14/2020 3:22 PM] slinkygn
|
||
I never justified how it would get more use than the HAAS, even.
|
||
|
||
|
||
[7/14/2020 3:22 PM] hon1nbo
|
||
I mean, if they were said alone that's one thing.... but you kept pushing it
|
||
|
||
|
||
[7/14/2020 3:22 PM] slinkygn
|
||
I just stayed it would.
|
||
|
||
|
||
[7/14/2020 3:22 PM] hon1nbo
|
||
as a serious argument
|
||
|
||
|
||
[7/14/2020 3:22 PM] slinkygn
|
||
*stated
|
||
|
||
|
||
[7/14/2020 3:22 PM] michaelb5250
|
||
Well neither of us treated it like a joke, so was it really a joke?
|
||
|
||
|
||
[7/14/2020 3:22 PM] michaelb5250
|
||
No
|
||
|
||
|
||
[7/14/2020 3:22 PM] hon1nbo
|
||
onlookers here does this seem like a joke?
|
||
|
||
|
||
[7/14/2020 3:22 PM] slinkygn
|
||
My suggestion was a joke. You treated it as not a joke, and in that process said nobody would use a reflow oven. I disagreed.
|
||
|
||
|
||
[7/14/2020 3:23 PM] canibalcrab
|
||
Calm down nerds
|
||
|
||
|
||
[7/14/2020 3:23 PM] canibalcrab
|
||
I see slinky trying to defuse and others berating them
|
||
|
||
|
||
[7/14/2020 3:23 PM] slinkygn
|
||
> So why are you so triggered now if it's all a joke?
|
||
@Deleted User > Sorry, I forgot. It was always a joke now that you've lost the argument.
|
||
@michaelb
|
||
You guys have fun deciding whether you want to argue if I currently think it's a joke or it's not.
|
||
|
||
|
||
[7/14/2020 3:23 PM] canibalcrab
|
||
Everyone just run off to another channel and forget it
|
||
|
||
|
||
[7/14/2020 3:24 PM] slinkygn
|
||
Pushing what as a serious argument?
|
||
|
||
|
||
[7/14/2020 3:24 PM] michaelb5250
|
||
But pearce this is so much more fun!
|
||
|
||
|
||
[7/14/2020 3:24 PM] slinkygn
|
||
I'll be happy to drop it once I know what words are being put iny mouth.
|
||
|
||
|
||
[7/14/2020 3:24 PM] slinkygn
|
||
The serious argument would be, the reflow oven would get used.
|
||
|
||
|
||
[7/14/2020 3:24 PM] draco_the_drake
|
||
I think we should have a small reflow oven if we don't already have one
|
||
|
||
|
||
[7/14/2020 3:24 PM] michaelb5250
|
||
We do, draco, we do.
|
||
|
||
|
||
[7/14/2020 3:24 PM] yashsedai
|
||
|
||
|
||
{Attachments}
|
||
https://cdn.discordapp.com/attachments/300062878676025344/732694149777850408/spongebob.jpg?ex=67b8e11a&is=67b78f9a&hm=b8efdf75391edff0ddd8627a6cca97c7db038558441357307fb7f8f1420b87dc&
|
||
|
||
|
||
[7/14/2020 3:25 PM] slinkygn
|
||
There's one in there. Still hoping for an answer if it's the 4yo one that isn't listed on the equipment list because it's broken or if it's a new one.
|
||
|
||
|
||
[7/14/2020 3:25 PM] michaelb5250
|
||
Oh man I've had enough, I gotta get back to work. Peace
|
||
|
||
|
||
[7/14/2020 3:26 PM] slinkygn
|
||
That would be part of my serious non-joking discussion that I asked in that text you may have read.
|
||
|
||
|
||
[7/14/2020 3:27 PM] slinkygn
|
||
The actual reflow oven I discussed seriously, because I'd actually use it. (You can tell because, y'know, no laughing emoji or memes of 90s movies.)
|
||
|
||
|
||
[7/14/2020 3:27 PM] hon1nbo
|
||
we have an oven; @michaelb and I both agree it is the right size for what we need and it doesn't make sense to get a bigger one. Then someone comes along and says we should get it because it's way nicer. Argues that it would get more users than the haas, justifies it like comparing the haas to x-carve, pretends they know how many people actually use the haas, when we keep saying it doesn't make sense to use a commercial sized oven for one board / hobby scales goes into arguments about how the hot air tools get used etc and that's justification,
|
||
then claims it was all a joke despite not just backing out of the discussion earlier
|
||
I think that's enough of a tl;dr. thanks for the reminder @michaelb I'm technically still on the clock
|
||
|
||
|
||
[7/14/2020 3:29 PM] hon1nbo
|
||
start of the seriousness and not a joke was clearly here:
|
||
> Comparing an ETS conveyor machine to a T962A is comparing a Haas to (edit) an X-carve
|
||
@slinkygn (George)
|
||
|
||
|
||
[7/14/2020 3:29 PM] slinkygn
|
||
I can show you the AD search I performed. Not that I think it's relevant. I appreciate your outlining your perception of what happened. Clarifies right up for me when and how much of what was clearly jest you guys took knee-jeel seriously despite big obvious Australian cues otherwise.
|
||
|
||
|
||
[7/14/2020 3:29 PM] slinkygn
|
||
That was LITERALLY POSTED WITH THE MEME
|
||
|
||
|
||
[7/14/2020 3:29 PM] hon1nbo
|
||
dude, you kept digging your heels in
|
||
|
||
|
||
[7/14/2020 3:30 PM] hon1nbo
|
||
random throwing ins of memes in you defending why we need a machine like that doesn't somehow make it a joke
|
||
|
||
|
||
[7/14/2020 3:30 PM] hon1nbo
|
||
or sarcasm
|
||
|
||
|
||
[7/14/2020 3:30 PM] slinkygn
|
||
I posted that statement with the meme. That was a JOKE.
|
||
|
||
|
||
[7/14/2020 3:30 PM] hon1nbo
|
||
if you left it at the original lines that would have been one thing, but then you posted that
|
||
|
||
|
||
[7/14/2020 3:30 PM] hon1nbo
|
||
and it kept going
|
||
|
||
|
||
[7/14/2020 3:30 PM] slinkygn
|
||
You called that the "start of the seriousness"
|
||
|
||
|
||
[7/14/2020 3:30 PM] hon1nbo
|
||
"slinkygn: Comparing an ETS conveyor machine to a T962A is comparing a Haas to (edit) an X-carve(edited)
|
||
[12:30 PM] michaelb: I mean those are indeed two CNCs
|
||
[12:31 PM] michaelb: Purchasing a Haas when you don't even use your X-carve is a pretty big waste of money.
|
||
[12:33 PM] slinkygn: If you have stuff you can do with the X-carve, sure -- but that's not usually how people buy stuff.
|
||
[12:34 PM] slinkygn: You have a need, so you buy the thing that fits it -- not you buy a thing and hope your need fits it.
|
||
[12:34 PM] slinkygn: Purchasing an X-carve because you want to mill billet aluminum but can't afford a Haas is a pretty big waste of money."
|
||
|
||
|
||
[7/14/2020 3:30 PM] slinkygn
|
||
Acknowledging that everything before that was clearly not serious
|
||
|
||
|
||
[7/14/2020 3:31 PM] slinkygn
|
||
So, basically, for you the transition from non-serious to serious, again, included a movie meme and little else.
|
||
|
||
|
||
[7/14/2020 3:31 PM] hon1nbo
|
||
whatever; I'm muting the channel now
|
||
|
||
|
||
[7/14/2020 3:31 PM] hon1nbo
|
||
it's too distracting
|
||
|
||
|
||
[7/14/2020 3:31 PM] slinkygn
|
||
That is the flying off the cuff I'm referring to.
|
||
|
||
|
||
[7/14/2020 3:31 PM] slinkygn
|
||
That's fine. You've clarified what you perceived. I appreciate it.
|
||
|
||
|
||
[7/14/2020 3:34 PM] slinkygn
|
||
And that your thought it started with my line about the HAAS and X-carve vs big and little oven. Instead of the following line - "Purchasing a HAAS when you don't even use your x-carve..." Remember 5m ago when you said nobody had said a reflow oven wouldn't be used, even the small one? As a response to my saying that is what I disagreed with and put forth an argument for?
|
||
|
||
|
||
[7/14/2020 3:35 PM] slinkygn
|
||
Like I said. Thanks for clarifying.
|
||
|
||
|
||
[7/14/2020 3:35 PM] slinkygn
|
||
Next time I'll make sure to not discuss anything while on the phone Discord app. 🙄
|
||
|
||
|
||
[7/14/2020 4:51 PM] doug.emes
|
||
@slinkygn (George) would you mind editing your profile in this discord to use your given name? Maybe like jim?
|
||
|
||
{Reactions}
|
||
👍
|
||
|
||
[7/14/2020 4:52 PM] canibalcrab
|
||
You can do that per discord server
|
||
|
||
|
||
[7/14/2020 4:52 PM] slinkygn
|
||
I certainly can.
|
||
|
||
{Reactions}
|
||
❤️
|
||
|
||
[7/14/2020 4:52 PM] canibalcrab
|
||
Just right click it in the server and hit 'change nickname'
|
||
|
||
|
||
[7/14/2020 4:53 PM] canibalcrab
|
||
-for the readers wondering
|
||
|
||
|
||
[7/14/2020 4:55 PM] slinkygn
|
||
Apologies. Took me a sec. Still on mobile currently.
|
||
|
||
|
||
[7/14/2020 4:57 PM] slinkygn
|
||
Also - just stopped for gas, so fortuitous timing, but I've been out of pocket for a bit before now and will be for a while more once I get in the car. Got another 30min or so to my drive, a stop and another 45min to finish.
|
||
|
||
|
||
[7/14/2020 5:03 PM] doug.emes
|
||
Thanks!
|
||
|
||
|
||
[7/15/2020 11:07 AM] chocolatelasagna
|
||
This is the toroid transformer I Wana use in a project. Was gonna do a linear bench supply but idk if I really need a linear one for what I will be doing in immediate future. If anyone has a use for it let me know I can let go of it for relatively cheap
|
||
|
||
{Attachments}
|
||
https://cdn.discordapp.com/attachments/300062878676025344/732991727136276650/JPEG_20200715_110550.jpg?ex=67b94d7e&is=67b7fbfe&hm=d31fb0f3818953af1d8245d3b1d55ca3d51ca0c5368bcb2de37034ad8b7680ad&
|
||
|
||
|
||
[7/15/2020 11:08 AM] chocolatelasagna
|
||
|
||
|
||
{Attachments}
|
||
https://cdn.discordapp.com/attachments/300062878676025344/732991909316001800/JPEG_20200715_110809.jpg?ex=67b94da9&is=67b7fc29&hm=5328071f37896d11dc2839a6b414163c9b37890a534d405fbb18dccb45510623&
|
||
|
||
|
||
[7/23/2020 8:16 AM] slinkygn
|
||
Does anyone here, by chance, own a Wooting keyboard?
|
||
|
||
|
||
[7/23/2020 8:16 AM] slinkygn
|
||
Got an experiment one may want to try if they do; I've just been talking to the keyboard developers and found an oddity with their build they're going to be asking the factory about
|
||
|
||
|
||
[7/30/2020 11:33 PM] kenpurcell
|
||
For my battery obsessed friends, you are welcome https://bigbattery.com/
|
||
|
||
{Embed}
|
||
https://bigbattery.com/
|
||
BigBattery.com - Your Source For Power - Renewable Energy Solutions
|
||
BigBattery, Inc. is the largest supplier of surplus and re-certified batteries in the United States. We promote mass adoption of renewable energy solutions.
|
||
https://images-ext-1.discordapp.net/external/dmG1U9SdOqRi_Nqsid86tRRFJu-BmndgvVlEqL_DLkI/https/bigbattery.com/wp-content/uploads/2020/01/BigBattery-Inc-1024x597.png
|
||
|
||
{Reactions}
|
||
❤️
|
||
|
||
[7/31/2020 9:08 AM] nullinterface
|
||
complete 24kWH Leaf batteries for $1000 ... even at their nominal 60% capacity that's 14.4Kwh at <$70/Kwh
|
||
|
||
|
||
[7/31/2020 9:39 AM] nullinterface
|
||
the idea of big powerbanks and powerwalls fascinate me, but I've never gotten so far as to try to build one
|
||
|
||
|
||
[7/31/2020 9:50 AM] skyspook
|
||
I have yet to need such a solution, but they fascinate me as well. I keep wanting to do an electrical conversion on a car some day too.
|
||
|
||
|
||
[7/31/2020 9:51 AM] nullinterface
|
||
wonder if *purple lightning* is still available
|
||
|
||
|
||
[7/31/2020 9:52 AM] michaelb5250
|
||
Electric Lemons car
|
||
|
||
|
||
[7/31/2020 9:52 AM] nullinterface
|
||
the conversion has already been done ... using early-90s EV kit tech ... so mainly you have don't have to remove the ICE stuff and have a ready-made battery tray to work with
|
||
|
||
|
||
[7/31/2020 9:53 AM] michaelb5250
|
||
Not sure what voltages that truck ran but I think it'd take a little bit of luck to just plug a leaf battery into it.
|
||
|
||
|
||
[7/31/2020 9:53 AM] andrew5152
|
||
OOOOOH. THAT 'purple lightning'
|
||
|
||
|
||
[7/31/2020 9:53 AM] michaelb5250
|
||
I bet you could buy that cheap enough to make a lemons car...
|
||
|
||
|
||
[7/31/2020 9:53 AM] michaelb5250
|
||
Someone ran an S10 at MSR last year
|
||
|
||
|
||
[7/31/2020 9:53 AM] andrew5152
|
||
I read 'purple lighting' and was thinking "Erik wants to LED his undercarriage? Grill?"
|
||
|
||
|
||
[7/31/2020 9:53 AM] nullinterface
|
||
you would want to redo it - it was a DC conversion without regenerative braking using lead-acid batteries
|
||
|
||
|
||
[7/31/2020 9:54 AM] nullinterface
|
||
could drop in LiFeP04 batteries - at terrific cost - and realize more useful capacity
|
||
|
||
|
||
[7/31/2020 9:55 AM] nullinterface
|
||
but better off to re-engineer it around normal li-ion chemistry and modern motors/controllers
|
||
|
||
|
||
[7/31/2020 9:57 AM] andrew5152
|
||
> but better off to **back away slowly, so as to not garner attention**
|
||
|
||
|
||
[7/31/2020 9:57 AM] skyspook
|
||
Saw some guys in lemons race an old electrica 007 with lead acid running it.... the amount of money they spent on batteries and chargers and generators must have been crazy.
|
||
|
||
|
||
[7/31/2020 9:58 AM] skyspook
|
||
Yes, let's LED Erik's ride. Sounds like fun 🙂
|
||
|
||
|
||
[7/31/2020 9:58 AM] nullinterface
|
||
but all I want are some lightbars - conspicuous for the Ranger and subtle for the WRX
|
||
|
||
|
||
[7/31/2020 9:59 AM] michaelb5250
|
||
Yeah, I kind of laughed when I figured out if you really wanted to run a lemons EV you'd almost certainly need to bring your own generator on a trailer to charge the batteries...
|
||
|
||
|
||
[7/31/2020 10:00 AM] nullinterface
|
||
racetracks not known for their electrical infrastructure, eh?
|
||
|
||
|
||
[7/31/2020 10:00 AM] skyspook
|
||
Not so much
|
||
|
||
|
||
[7/31/2020 10:01 AM] skyspook
|
||
But they really want you to race one: https://24hoursoflemons.com/blog/electric-race-car/
|
||
|
||
{Embed}
|
||
https://24hoursoflemons.com/blog/electric-race-car/
|
||
Electric Race Car: Win a Lemons Race in Your EV, Get a Million Nick...
|
||
No joking about this: If you can win a 24 Hours of Lemons race with your electric race car, you can get a 5.5-ton haul of nickels.
|
||
https://images-ext-1.discordapp.net/external/xP6szeeSeCJ6WmFYJYpIAXZp-ilbj2Dph1-FqfuOyUM/https/24hoursoflemons.com/wp-content/uploads/2019/03/Lemons_Electric_0000-4.jpg
|
||
|
||
|
||
[7/31/2020 10:01 AM] nullinterface
|
||
the one time I was dragged out to Eagles' Canyon it seemed like the 'pits' were primarily easy-ups in the parking lot
|
||
|
||
|
||
[7/31/2020 10:02 AM] nullinterface
|
||
a bit harder to procure ***unreasonable*** quantities of nickels these days 😂
|
||
|
||
|
||
[7/31/2020 10:06 AM] nullinterface
|
||
if I had unreasonable amounts of time and didn't mind potentially throwing away >$2000 I'd grab one of those early retail BEVs (i.e. Spark) and rehab it as a grocery-getter
|
||
|
||
|
||
[7/31/2020 11:53 AM] nullinterface
|
||
could be an interesting group project, but equitable administration/distribution cost and effort would be challenging
|
||
|
||
|
||
[7/31/2020 12:08 PM] skyspook
|
||
That's the definition of a race team
|
||
|
||
|
||
[7/31/2020 12:09 PM] themitch22
|
||
Could you do a battery swap in the pits and keep going?
|
||
|
||
|
||
[7/31/2020 12:09 PM] nullinterface
|
||
I was thinking conversion project for something practical as a daily
|
||
|
||
|
||
[7/31/2020 12:10 PM] nullinterface
|
||
@themitch22 likely the only practical way to do endurance racing in an EV
|
||
|
||
|
||
[7/31/2020 12:11 PM] themitch22
|
||
Or a solar "car" and win the least number of laps
|
||
|
||
|
||
[7/31/2020 12:11 PM] themitch22
|
||
And probably be a danger to everyone on the track
|
||
|
||
|
||
[7/31/2020 12:21 PM] nullinterface
|
||
in a Lemons-style multi-class race? Likely.
|
||
|
||
|
||
[7/31/2020 12:27 PM] skyspook
|
||
Yes, that's how they did it. Pretty cool system they had
|
||
|
||
|
||
[7/31/2020 12:27 PM] skyspook
|
||
Though there were doing it a lot
|
||
|
||
|
||
[7/31/2020 12:27 PM] skyspook
|
||
Cause... Racing
|
||
|
||
|
||
[8/1/2020 7:48 PM] aesthetys
|
||
Newbie here. If I try to build this, am I likely to die? https://mad-science.wonderhowto.com/how-to/turn-microwave-oven-transformer-into-high-amperage-metal-melter-0140772/
|
||
|
||
{Embed}
|
||
https://mad-science.wonderhowto.com/how-to/turn-microwave-oven-transformer-into-high-amperage-metal-melter-0140772/
|
||
How to Turn a Microwave Oven Transformer into a High Amperage Metal...
|
||
In this project, you'll learn step by step how to modify a microwave oven transformer into a high-current device that can pump out 800 amps of electrical current, which is enough amperage to melt metal. If you liked the Metal Melter you saw in my previous project, here's how y...
|
||
https://images-ext-1.discordapp.net/external/GEIMuuxGmp43-ZXZPuQhGwBx_WDRwhD6dnjmIRtennI/https/img.wonderhowto.com/img/30/52/63490997232525/0/turn-microwave-oven-transformer-into-high-amperage-metal-melter.1280x600.jpg
|
||
|
||
|
||
[8/1/2020 7:48 PM] aesthetys
|
||
I'm good at following instructions though
|
||
|
||
|
||
[8/1/2020 7:49 PM] aesthetys
|
||
I need a forge to do blacksmithing and this looks like a cheap way to get something that works...assuming I don't kill myself with it.
|
||
|
||
|
||
[8/1/2020 7:50 PM] aesthetys
|
||
If it's okay to build, I have a follow-up question: can that eye hole there be made bigger so I can insert a bigger metal stock?
|
||
|
||
|
||
[8/1/2020 7:58 PM] canibalcrab
|
||
Honestly you can get a hellfire forge that uses propane for 150-200
|
||
|
||
|
||
[8/1/2020 7:58 PM] canibalcrab
|
||
Using a microwave just seems like a bad idea
|
||
|
||
|
||
[8/1/2020 7:58 PM] Deleted User
|
||
That's a lot safer than using it for fractal burning at least
|
||
|
||
|
||
[8/1/2020 7:59 PM] Deleted User
|
||
But an induction heater would be a lot easier to control
|
||
|
||
|
||
[8/1/2020 8:01 PM] canibalcrab
|
||
Induction is awesome. But can get expensive
|
||
|
||
|
||
[8/1/2020 8:02 PM] aesthetys
|
||
@pearce Can I just use a plain old campfire if my wood fire skills are good enough?
|
||
|
||
|
||
[8/1/2020 8:02 PM] aesthetys
|
||
I looked it up and those can get pretty hot
|
||
|
||
|
||
[8/13/2020 11:39 AM] nullinterface
|
||
a ***thorough*** post-mortem analysis on the exothermic failure of a utility-scale battery storage system :
|
||
https://www.aps.com/-/media/APS/APSCOM-PDFs/About/Our-Company/Newsroom/McMickenFinalTechnicalReport.ashx?la=en&hash=50335FB5098D9858BFD276C40FA54FCE
|
||
|
||
|
||
[8/13/2020 11:44 AM] nullinterface
|
||
of interest since I've had a hankering to do large powerbanks and DIY powerwalls but pretty much none of the builds I've seen do much to account for the possibility of overheating, thermal runaway, or fire suppression
|
||
|
||
|
||
[8/13/2020 11:46 AM] nullinterface
|
||
cheapest way I can think of to handle such possibilities for the homeowner on a small scale is to simply *bury* their DIY powerwall and make some arrangements for any overpressure from outgassing or fire to vent to atmosphere
|
||
|
||
|
||
[8/14/2020 7:28 PM] michaelb5250
|
||
Anyone here been going through the Tanner's donation pile?
|
||
|
||
|
||
[8/14/2020 7:29 PM] michaelb5250
|
||
I'm hoping to find some very basic 7-segment mV meters, like 0-50 or 0-100mV, panel mount. They're everywhere on Amazon just figured he mightve had some.
|
||
|
||
|
||
[8/14/2020 7:29 PM] michaelb5250
|
||
New laser project (safe ammeters on the front panel).
|
||
|
||
|
||
[8/18/2020 8:58 AM] nullinterface
|
||
Tanner's wasn't known for ... contemporaneous ... inventory
|
||
|
||
|
||
[8/18/2020 11:24 AM] michaelb5250
|
||
It feels like exactly the type of thing that Tanner's would've had a styrofoam tray of sitting around, but is also likely to have been bought up by someone when closing.
|
||
|
||
Either way, Art picked some up for me at Newark for not too much money.
|
||
|
||
|
||
[8/18/2020 12:15 PM] themitch22
|
||
they also didn't have cool stuff like nixie tubes. I would love to see if any adafruit stuff made it to those bins
|
||
|
||
|
||
[8/18/2020 12:16 PM] skyspook
|
||
Sounds like some inventory needs to be done
|
||
|
||
|
||
[8/18/2020 12:17 PM] canibalcrab
|
||
Sounds like electronics needs to not sit on piles of parts for years
|
||
|
||
|
||
[8/18/2020 12:17 PM] canibalcrab
|
||
Again
|
||
|
||
|
||
[8/18/2020 12:19 PM] michaelb5250
|
||
There's a rumor that some people are going through it, but I guess they're not on discord. Malcolm would know more.
|
||
|
||
|
||
[8/18/2020 12:20 PM] michaelb5250
|
||
That being said, electronics does love to sit on piles and piles and loosely sorted junk 🤣
|
||
|
||
{Reactions}
|
||
😂
|
||
|
||
[8/18/2020 1:00 PM] skyspook
|
||
I don't mind having useful components around. But you have to actually be able to find them in order for it to be useful...
|
||
|
||
|
||
[8/18/2020 1:00 PM] kentamanos
|
||
once upon a time I sorted the 74xx series of DIPs they had, many with legs that still had some solder on them 🙂
|
||
|
||
|
||
[8/18/2020 1:10 PM] canibalcrab
|
||
It's something like 3100 gallons of surplus electronics
|
||
|
||
|
||
[8/18/2020 1:22 PM] michaelb5250
|
||
That's 1.44 cubic centifurlongs.
|
||
|
||
|
||
[8/18/2020 1:28 PM] yashsedai
|
||
Sounds like a job for the ROLLAWAY DUMPSTER SERVICE
|
||
|
||
|
||
[8/18/2020 2:19 PM] hon1nbo
|
||
^^ this
|
||
I liked the idea of taking donations from them, but they needed to be more discriminatory about what they take in
|
||
|
||
|
||
[8/18/2020 2:21 PM] skyspook
|
||
I can volunteer to go through it. I'm pretty brutal about tossing stuff -- though if it's just me it'll take a while.
|
||
|
||
|
||
[8/18/2020 2:22 PM] yashsedai
|
||
I propose that we order a dumpster, take all the bins, throw contents in said dumpster, tell everyone the dumpster will be gone in one week, let the chips fall as they may, one condition, nothing comes back in the building
|
||
|
||
|
||
[8/18/2020 2:22 PM] kenpurcell
|
||
Or at least follow up when you say you are going to go through them. I have already thrown away several million parts (SMD/SMT) though. I can come back up there with a crew and wreak havoc!
|
||
|
||
|
||
[8/18/2020 2:23 PM] yashsedai
|
||
While we are at it, go over into electronics dept and do the same with all the bs sitting around
|
||
|
||
|
||
[8/18/2020 2:29 PM] michaelb5250
|
||
@Skyspook I'll help go through it as well. Though I thought Malcolm and Art had a group already doing that.
|
||
|
||
|
||
[8/18/2020 2:30 PM] skyspook
|
||
No clue. I can check in with Art at some point 🙂
|
||
|
||
|
||
[8/18/2020 2:37 PM] hon1nbo
|
||
@malcolmputer care to chime in?
|
||
|
||
|
||
[8/18/2020 2:40 PM] malcolmputer
|
||
I set up a google doc with the inventory in sheets, set up some basic categories, and Art and I went through about 10% of the inventory as a test to see how the sheet works.
|
||
|
||
|
||
[8/18/2020 2:42 PM] malcolmputer
|
||
We took down info such as the following:
|
||
|
||
|
||
[8/18/2020 2:42 PM] malcolmputer
|
||
1 Relay 2 NO Relay 30A 208 coil 9
|
||
1 Hardware Metric M2, M3, M4 bolts, nuts, washers 15
|
||
1 Solenoid Robot Grabber Arm 1
|
||
1 Breakers 40A 240V AC/DC 22
|
||
1 Tools Magnifying Glass 24
|
||
1 Eval Board Video Converter + Cables, VGA S Video Composite 1
|
||
|
||
|
||
[8/18/2020 2:42 PM] malcolmputer
|
||
and of course it's sortable etc.
|
||
|
||
|
||
[8/18/2020 2:43 PM] malcolmputer
|
||
The plan was once we had inventoried everything we would start deciding how to bundle for sale/giveaway/whatever is legal with DMS and what to keep as a honor system donation style things for DMS elab.
|
||
|
||
{Reactions}
|
||
👍 (3)
|
||
|
||
[8/18/2020 2:43 PM] michaelb5250
|
||
dumb question: was there a mechanism for locating items in the room?
|
||
|
||
|
||
[8/18/2020 2:44 PM] malcolmputer
|
||
Bin number, that's the first row in the above paste.
|
||
|
||
|
||
[8/18/2020 2:44 PM] malcolmputer
|
||
We got through bins 1-12 out of ~120.
|
||
|
||
|
||
[8/18/2020 2:45 PM] malcolmputer
|
||
All of the bins have a small sharpie marked number on the bin and the bin lid to make sure we don't confuse them by moving them around.
|
||
|
||
|
||
[8/18/2020 2:49 PM] skyspook
|
||
Rock on 🙂
|
||
|
||
|
||
[8/18/2020 2:49 PM] malcolmputer
|
||
@Skyspook I'm sure Art would be happy to have another volunteer to help him with the bins. I set up the sheet, the categories, but let him know that it was back in his court as my work stuff picked back up.
|
||
|
||
|
||
[8/18/2020 4:13 PM] kenpurcell
|
||
A searchable spreadsheet is ideal.
|
||
|
||
|
||
[8/18/2020 5:26 PM] malcolmputer
|
||
It is searchable, and more importantly filterable. You could for instance, filter to relays, and then sort high to low by quantity, and if you wanted to filter by AC or DC and then search by max V or A you could.
|
||
|
||
|
||
[8/19/2020 12:56 AM] slinkygn
|
||
@malcolmputer link to the Google doc, by chance?
|
||
|
||
|
||
[8/19/2020 1:47 AM] themitch22
|
||
Are the parts from tanners free for all or someone gets first dibs?
|
||
|
||
|
||
[8/19/2020 8:30 AM] kenpurcell
|
||
Traditionally they have been free to use in projects, not just free to take for your home stock pile. I guess determine DMS's use first, then members use and then enough for free to take.
|
||
|
||
|
||
[8/19/2020 8:31 AM] kenpurcell
|
||
That may change depending on how long the take up orange
|
||
|
||
|
||
[8/19/2020 9:17 AM] canibalcrab
|
||
But electronics has to sort the donation before anyone can go taking stuff
|
||
|
||
|
||
[8/19/2020 9:32 AM] malcolmputer
|
||
@slinkygn (George) @artg_dms is the owner of the sheet, I think he's only giving it to people who volunteer to sort in the short term at least.
|
||
|
||
|
||
[8/19/2020 9:33 AM] malcolmputer
|
||
The electronics are not free, keep your mitts to yourself until @artg_dms says otherwise.
|
||
|
||
|
||
[8/19/2020 9:37 AM] michaelb5250
|
||
Is there an active effort to sort it? Like days set up or people being recruited? Art didn't say anything at the last committee meeting, he mentioned other stuff like amateur radio and mouser donations
|
||
|
||
|
||
[8/19/2020 9:39 AM] michaelb5250
|
||
I guess where I'm concerned is that electronics has a history of hoarding things, and now an entire classroom is tied up with crates of stuff, people are told not to touch, and it seems like the committee is fine just letting it sit there.
|
||
|
||
|
||
[8/19/2020 9:41 AM] brsims2406
|
||
You aren't the only one with those concerns. I pinged Art about it this morning.
|
||
|
||
|
||
[8/19/2020 9:51 AM] slinkygn
|
||
> @slinkygn (George) @artg_dms is the owner of the sheet, I think he's only giving it to people who volunteer to sort in the short term at least.
|
||
@malcolmputer I'd volunteer to sort. It'd be more productive than the time I spent sorting the old piles and piles of components. :)
|
||
|
||
|
||
[8/19/2020 2:23 PM] michaelb5250
|
||
Coworker found a pack of these when cleaning out his desk, I think they would go real well with the rest of the stuff in electronics 😝
|
||
|
||
{Attachments}
|
||
https://cdn.discordapp.com/attachments/300062878676025344/745724658778636318/20200819_142227.jpg?ex=67b8d2b5&is=67b78135&hm=78d4a933b12810ce70a242f34d6a2ef918fc24b3765227b67c9bcc72346e07b8&
|
||
|
||
{Reactions}
|
||
👍
|
||
|
||
[8/19/2020 2:29 PM] skyspook
|
||
lol, I used those! Good times
|
||
|
||
|
||
[8/20/2020 12:12 AM] themitch22
|
||
Etch resist stickers for acid etching boards?
|
||
|
||
|
||
[8/20/2020 12:12 AM] themitch22
|
||
Why not use a marker and hand draw the traces like the good old days.
|
||
|
||
|
||
[8/20/2020 12:36 AM] michaelb5250
|
||
Lol no, you can put these directly on a PCB but the intention is to lay them down on mylar sheets, which are used as masks to make boards.
|
||
|
||
|
||
[8/20/2020 12:54 AM] themitch22
|
||
More steps. Now we have cad and laser printer transfers
|
||
|
||
|
||
[8/20/2020 8:40 AM] skyspook
|
||
But then it doesn't look like a 3-year-old cut and pasted your circuit together
|
||
|
||
|
||
[8/20/2020 9:44 AM] themitch22
|
||
Have to admit that is pretty cool though
|
||
|
||
{Attachments}
|
||
https://cdn.discordapp.com/attachments/300062878676025344/746016744358805604/3trins-front-angle.jpeg?ex=67b939fc&is=67b7e87c&hm=5b0f04db1eba982382f82582b03130c6207ce8ad249479bc85ec80fcd9a10927&
|
||
|
||
|
||
[8/20/2020 9:46 AM] skyspook
|
||
They're like functional modern art 🙂
|
||
|
||
|
||
[8/20/2020 9:55 AM] themitch22
|
||
Ooo what happened to that free-form digital clock built with discrete components at Tanners? That was my favorite thing
|
||
|
||
|
||
[8/20/2020 10:01 AM] canibalcrab
|
||
It was a gift to jimmy
|
||
|
||
|
||
[8/20/2020 10:01 AM] canibalcrab
|
||
He and a friend would make wild shit like that and give it to each other
|
||
|
||
|
||
[8/20/2020 10:04 AM] themitch22
|
||
I'd love to do that but with nixie tubes
|
||
|
||
|
||
[8/20/2020 11:08 AM] canibalcrab
|
||
I have a laptop that has a broken power port, I need to get a final charge into the battery before retirement for it
|
||
|
||
|
||
[8/20/2020 11:08 AM] canibalcrab
|
||
|
||
|
||
{Attachments}
|
||
https://cdn.discordapp.com/attachments/300062878676025344/746037918497505360/IMG_20200820_110727.jpg?ex=67b94db4&is=67b7fc34&hm=9299f4b0f7e4d9a1e98ffb736ec3ed4441b0d8b3e0c5b3bd0517d725c5fb3208&
|
||
|
||
|
||
[8/20/2020 11:08 AM] canibalcrab
|
||
This is the battery connection
|
||
|
||
|
||
[8/20/2020 11:08 AM] canibalcrab
|
||
Thoughts on charging? The power connection is a type c that doesn't seem to be responding
|
||
|
||
|
||
[8/20/2020 11:19 AM] yashsedai
|
||
pardon my ignorance, why does it need a final charge?
|
||
|
||
|
||
[8/20/2020 11:19 AM] yashsedai
|
||
@pearce
|
||
|
||
|
||
[8/20/2020 11:19 AM] canibalcrab
|
||
*files*
|
||
|
||
|
||
[8/20/2020 11:20 AM] canibalcrab
|
||
But it's also got a busted screen so I wasn't going to invest a bunch more into it
|
||
|
||
|
||
[8/20/2020 11:20 AM] yashsedai
|
||
eh
|
||
|
||
|
||
[8/20/2020 11:20 AM] yashsedai
|
||
why not just pull the drive
|
||
|
||
|
||
[8/20/2020 11:20 AM] yashsedai
|
||
and copy the files
|
||
|
||
|
||
[8/20/2020 11:20 AM] yashsedai
|
||
no need for charging
|
||
|
||
|
||
[8/20/2020 11:20 AM] canibalcrab
|
||
Super thin client
|
||
|
||
|
||
[8/20/2020 11:21 AM] canibalcrab
|
||
All surface mount bits
|
||
|
||
|
||
[8/20/2020 11:21 AM] yashsedai
|
||
on the hard drive?
|
||
|
||
|
||
[8/20/2020 11:21 AM] yashsedai
|
||
what is the make/model
|
||
|
||
|
||
[8/20/2020 11:21 AM] canibalcrab
|
||
Razer blade stealth 2016
|
||
|
||
|
||
[8/20/2020 11:23 AM] canibalcrab
|
||
But putting a charge into it will let me use it a few more times while I get a new one
|
||
|
||
|
||
[8/20/2020 11:24 AM] yashsedai
|
||
aye
|
||
|
||
|
||
[8/20/2020 11:24 AM] yashsedai
|
||
if that doesn't work
|
||
|
||
|
||
[8/20/2020 11:24 AM] yashsedai
|
||
https://www.amazon.com/M-2-External-Converter-Adapter-Enclosure/dp/B076DCNZM3
|
||
|
||
|
||
[8/20/2020 11:24 AM] yashsedai
|
||
https://www.ifixit.com/Guide/Razer+Blade+Stealth+2016+Hard+Drive+Replacement/128080
|
||
|
||
{Embed}
|
||
https://www.ifixit.com/Guide/Razer+Blade+Stealth+2016+Hard+Drive+Replacement/128080
|
||
Razer Blade Stealth 2016 Hard Drive Replacement
|
||
This guide will show you a step by step on how to remove the hard drive from Razer Blade Stealth
|
||
https://images-ext-1.discordapp.net/external/o55rQ7iO1dkQAwXRv6OjQeYdnjHrf5WbYaxdxI0mtcA/https/d3nevzfk7ii3be.cloudfront.net/igi/1ssPmHQKxPqobnbI.full
|
||
|
||
|
||
[8/20/2020 11:24 AM] yashsedai
|
||
looks pretty easy to get out
|
||
|
||
|
||
[8/20/2020 11:26 AM] canibalcrab
|
||
So it does have an m.2
|
||
|
||
|
||
[8/20/2020 11:26 AM] canibalcrab
|
||
Hadn't taken it apart that far
|
||
|
||
|
||
[8/20/2020 11:30 AM] yashsedai
|
||
yup
|
||
|
||
|
||
[8/20/2020 11:40 AM] andrew5152
|
||
(based on that tutorial)
|
||
It looks like the hard part will be painting your nails a funky blue and decorating them
|
||
plus, I wonder of that Gold ring is absolutely necessary?
|
||
Maybe it's a degaussing device for preventing the super-zap from static discharge?
|
||
And lord! I'd have to upgrade my wristwatch from nothing to an iWatch...
|
||
Screw that.
|
||
|
||
|
||
[8/20/2020 12:04 PM] themitch22
|
||
Is your razer blade dead or are you going to replace the battery?
|
||
|
||
|
||
[8/20/2020 12:05 PM] canibalcrab
|
||
It's not seeing the power connection
|
||
|
||
|
||
[8/20/2020 12:06 PM] canibalcrab
|
||
So it can't charge
|
||
|
||
|
||
[8/20/2020 12:06 PM] canibalcrab
|
||
Although the battery doesn't register at all on a meter
|
||
|
||
|
||
[8/20/2020 12:18 PM] themitch22
|
||
Is the charger on the main board? Probably not worth replacing.
|
||
|
||
|
||
[8/20/2020 12:18 PM] themitch22
|
||
The razer blade stealth is a nice laptop though but glad i bought an Alienware, it has been much more user serviceable than I thought.
|
||
|
||
|
||
[8/20/2020 12:27 PM] canibalcrab
|
||
Power is connected to mobo
|
||
|
||
|
||
[8/20/2020 3:10 PM] nullinterface
|
||
I've had good luck with my cheap ASUS
|
||
|
||
|
||
[8/20/2020 3:11 PM] nullinterface
|
||
although I suspect that the power connector will eventually be the lethal flaw
|
||
|
||
|
||
[8/20/2020 3:31 PM] canibalcrab
|
||
I was eyeballing a small Lenovo
|
||
|
||
|
||
[8/20/2020 3:31 PM] canibalcrab
|
||
Needs to fit on my toolbox so I can lug it to repairs
|
||
|
||
|
||
[8/20/2020 3:33 PM] michaelb5250
|
||
XPS 13?
|
||
|
||
|
||
[8/20/2020 5:38 PM] doug.emes
|
||
@pearce, gpd.hk get a micropc
|
||
|
||
|
||
[8/20/2020 5:39 PM] doug.emes
|
||
Its that baby laptop you have seen me record meetings with etc
|
||
|
||
|
||
[8/20/2020 5:39 PM] doug.emes
|
||
It fits in your pocket
|
||
|
||
|
||
[8/27/2020 12:48 AM] hardsuit
|
||
I'm planning on a 15" HP Envy x360 for Black Friday, already have the 32GB ram kit to upgrade it
|
||
|
||
|
||
[9/8/2020 2:24 PM] jackb923
|
||
Anyone know if the Tektronix2465 analog scope is working? been trying to use xy mode, and can't seem to get anything
|
||
|
||
|
||
[9/9/2020 7:30 PM] hon1nbo
|
||
what does the space currently have logic-analyzer wise?
|
||
|
||
|
||
[9/9/2020 8:01 PM] skyspook
|
||
Didn't Raymond just do a class on some we had?
|
||
|
||
|
||
[9/10/2020 1:19 AM] themitch22
|
||
the national instruments fancy thing that connects to the computer
|
||
|
||
|
||
[9/25/2020 2:06 PM] doug.emes
|
||
any thoughts on this system: https://simplisafe.com/ - not for DMS< but for a residence
|
||
|
||
{Embed}
|
||
https://simplisafe.com/
|
||
SimpliSafe: Home Security Systems
|
||
SimpliSafe Official Site: get the wireless home security system that lets you take control of your safety - in your home, apartment, or business
|
||
https://images-ext-1.discordapp.net/external/MY-usbFn81wNI_oreTR2yBLkkQymu6Xgp-0SlMzDlhk/https/simplisafe.com/files/images/ss3/ss3-opengraph.png
|
||
|
||
|
||
[9/25/2020 2:12 PM] skyspook
|
||
https://www.youtube.com/watch?v=UlNkQJzw4oA
|
||
|
||
{Embed}
|
||
LockPickingLawyer
|
||
https://www.youtube.com/watch?v=UlNkQJzw4oA
|
||
[935] SimpliSafe Alarm Bypassed With a $2 Device From Amazon
|
||
https://images-ext-1.discordapp.net/external/qBf-_hQAJ4Xsg_kEE9lCMHNzhoOqP-Wrc-YWDG6FggY/https/i.ytimg.com/vi/UlNkQJzw4oA/maxresdefault.jpg
|
||
|
||
{Reactions}
|
||
👍
|
||
|
||
[9/25/2020 2:12 PM] skyspook
|
||
If you overwhelm the wireless signal, it won't alarm.
|
||
|
||
|
||
[9/25/2020 2:15 PM] doug.emes
|
||
technically cutting the fiber at the end of the street is a great burglar idea
|
||
|
||
|
||
[9/25/2020 2:15 PM] skyspook
|
||
lol, true
|
||
|
||
|
||
[9/25/2020 2:17 PM] doug.emes
|
||
my house has an old zigbee based system, hasnt been monitored in a decade the batteries have finally died i think
|
||
|
||
|
||
[9/26/2020 5:27 PM] nullinterface
|
||
> technically cutting the fiber at the end of the street is a great burglar idea
|
||
@doug.emes shocked this doesn't happen more often with fiber hubs being easy to find and ... passivee
|
||
|
||
|
||
[9/26/2020 5:49 PM] skyspook
|
||
We just had a big fiber cut in Addison that took down one of my company's mpls circuits. Course, that was just a gorilla with an auger.
|
||
|
||
|
||
[9/26/2020 10:15 PM] nullinterface
|
||
digger fade: decidedly more pronounced than rain fade
|
||
|
||
|
||
[10/23/2020 6:35 PM] nullinterface
|
||
|
||
|
||
{Attachments}
|
||
https://cdn.discordapp.com/attachments/300062878676025344/769343379926286357/Screenshot_20201023-183439.png?ex=67b90ddb&is=67b7bc5b&hm=e7a2e28094ffdbe53344a68ab4a2f9d1c2541b7d4b4fda293b59f6f5db7ff0fb&
|
||
|
||
|
||
[11/6/2020 12:34 PM] nullinterface
|
||
anyone know of some hardware on the market that would allow for *connectors* to be spliced *inline* on already-run wires?
|
||
|
||
|
||
[11/6/2020 12:38 PM] nullinterface
|
||
I could tolerate taps so long as they trim out neatly, but products like these aren't big enough:
|
||
https://www.amazon.com/Wire-Connectors-Solderless-Stripping-Connection/dp/B07114RK67
|
||
|
||
|
||
[11/6/2020 2:17 PM] yashsedai
|
||
plain old 110v?
|
||
|
||
|
||
[11/6/2020 2:17 PM] yashsedai
|
||
low voltage?
|
||
|
||
|
||
[11/6/2020 5:28 PM] nullinterface
|
||
Low voltage DC, couple of amps
|
||
|
||
|
||
[11/21/2020 5:50 PM] nullinterface
|
||
|
||
|
||
{Attachments}
|
||
https://cdn.discordapp.com/attachments/300062878676025344/779856382903058452/unknown-4.png?ex=67b9115a&is=67b7bfda&hm=6576b9a6c345f57b6f9e2345c2f2c5e0ced1ad3f1c4688a66459ad221f81a289&
|
||
|
||
|
||
[11/21/2020 5:51 PM] nullinterface
|
||
Because I'm nerding out / theory crafting the possibilities of Tesla's 46800 cells
|
||
|
||
|
||
[11/21/2020 5:59 PM] nullinterface
|
||
Chart isn't the most self-explanatory, but the peak values for 18650/21700/26650 are distinct high-density/high-current cells, thus the "synthetic C" value is a fiction for the sake of metrics to work against possible 46800 values
|
||
|
||
|
||
[11/21/2020 6:01 PM] nullinterface
|
||
I seriously doubt that a potential high-current version of the form factor is
|
||
A. Likely
|
||
B. Going to manage 8.5C discharge, thus I've corrected it to account for the Surface Area : Volume ratio it has relative to 18650
|
||
|
||
|
||
[12/19/2020 11:43 AM] aesthetys
|
||
What’s the best one of these “learn electronics” kits? Are they pretty good?
|
||
|
||
|
||
[12/19/2020 11:43 AM] aesthetys
|
||
https://www.amazon.com/Elenco-300-in-One-Electronic-Project-Lab/dp/B00005K86O
|
||
|
||
|
||
[1/13/2021 8:09 PM] mariooo8524
|
||
I found a book in the electronics section called “Learn by Discovery”. It gave me a shopping list of components to purchase (all tools can already be found at the Space). It’s filled with little projects to do. You may join me in learning electronics if you’d like.
|
||
|
||
|
||
[1/17/2021 12:46 PM] nullinterface
|
||
9V alakline batteries are terrible and have no place in modern electronics
|
||
|
||
|
||
[1/17/2021 12:46 PM] nullinterface
|
||
and by *modern* I mean *made within the last 20 years*
|
||
|
||
|
||
[1/17/2021 1:09 PM] skyspook
|
||
But they taste good
|
||
|
||
|
||
[1/17/2021 1:13 PM] michaelb5250
|
||
Shockingly delicious
|
||
|
||
|
||
[1/17/2021 1:16 PM] nullinterface
|
||
tell me how a car battery tastes - only 33% more voltage
|
||
|
||
|
||
[1/17/2021 1:29 PM] skyspook
|
||
They're juicy, but not as delicious.
|
||
|
||
|
||
[1/17/2021 1:30 PM] skyspook
|
||
Too spicy
|
||
|
||
|
||
[1/17/2021 1:48 PM] nullinterface
|
||
well played
|
||
|
||
|
||
[1/17/2021 2:27 PM] nullinterface
|
||
Had to play a *fun* game of 'find a working 9V battery" today
|
||
|
||
|
||
[1/17/2021 3:49 PM] themitch22
|
||
18650's are the new 9v battery
|
||
|
||
|
||
[1/17/2021 4:53 PM] nullinterface
|
||
no, the 9v battery is new the 9v battery - low capacity, high self-discharge, low current capability, expensive
|
||
|
||
|
||
[1/21/2021 10:25 PM] nullinterface
|
||
did the bounty from Tanners include any chassis-mount wirewound resistors?
|
||
|
||
|
||
[1/23/2021 12:42 PM] mariooo8524
|
||
I saw a room with a sign that said “Hackerspace” that said they meet up every third Friday. Is that group active?
|
||
|
||
|
||
[1/23/2021 2:45 PM] brsims2406
|
||
Nope, never really were except in theory
|
||
|
||
|
||
[2/28/2021 8:28 PM] themitch22
|
||
not sure anyone is here but I need help with something with micropython and sbus/uart
|
||
|
||
|
||
[2/28/2021 8:55 PM] talkers
|
||
Try Bill. You can pm him on talk
|
||
|
||
|
||
[2/28/2021 9:04 PM] themitch22
|
||
PM'd him
|
||
|
||
|
||
[2/28/2021 9:04 PM] themitch22
|
||
I think he has an email as well
|
||
|
||
|
||
[3/3/2021 9:59 PM] mrcity
|
||
Someone made a gun that shoots ... capacitors https://www.youtube.com/watch?v=iIYlyMv7hRM
|
||
|
||
{Embed}
|
||
Blinky Blink
|
||
https://www.youtube.com/watch?v=iIYlyMv7hRM
|
||
Capacitor Gun
|
||
https://images-ext-1.discordapp.net/external/69r00DuT8qE1v2vlvTodqawPwnNVvjVCh2hDYjH41Pc/https/i.ytimg.com/vi/iIYlyMv7hRM/maxresdefault.jpg
|
||
|
||
{Reactions}
|
||
🔥
|
||
|
||
[3/7/2021 4:28 PM] themitch22
|
||
https://talk.dallasmakerspace.org/t/raspberry-pi-pico-sbus-code-help/79375
|
||
|
||
I can't condense 20 years of computer science experience into a week, so I need help.
|
||
|
||
{Embed}
|
||
https://talk.dallasmakerspace.org/t/raspberry-pi-pico-sbus-code-help/79375
|
||
Raspberry Pi Pico SBUS Code Help
|
||
I am trying to read data from an R/C receiver over SBUS which is an inverted signal to UART. I started with this library which is meant for a pyboard so the micropython implementation doesn’t work the same. With @Evan_Lott help I have been able to get the code translated to run without errors, but no data is received. Without having to use...
|
||
https://images-ext-1.discordapp.net/external/I4_EedIDX0BjqrznQWWDFVury0feLFBlQTwMKQACnF4/https/dms-discourse-static.s3.dualstack.us-east-1.amazonaws.com/original/3X/f/7/f70cced1563c2e6c3aab1a7cbef3cfba5d1983fe.png
|
||
|
||
|
||
[3/7/2021 4:57 PM] aceat64
|
||
I've never even heard of SBUS before
|
||
|
||
|
||
[3/7/2021 5:00 PM] aceat64
|
||
hmm, doesn't look like it's as simple as UART, it's a parallel bus, not serial
|
||
|
||
|
||
[3/7/2021 5:00 PM] aceat64
|
||
or maybe not, still reading about it
|
||
|
||
|
||
[3/7/2021 5:04 PM] themitch22
|
||
The SBUS protocol uses an inverted serial logic with a baud rate of 100000, 8 data bits, even parity, and 2 stop bits. The SBUS packet is 25 bytes long consisting of:
|
||
|
||
Byte[0]: SBUS header, 0x0F
|
||
|
||
Byte[1 -22]: 16 servo channels, 11 bits each
|
||
|
||
Byte[23]
|
||
|
||
Bit 7: channel 17 (0x80)
|
||
|
||
Bit 6: channel 18 (0x40)
|
||
|
||
Bit 5: frame lost (0x20)
|
||
|
||
Bit 4: failsafe activated (0x10)
|
||
|
||
Byte[24]: SBUS footer
|
||
|
||
|
||
[3/7/2021 5:05 PM] themitch22
|
||
Most drone flight controllers use UART but inverts the signals, 0v is low 5v is high I think
|
||
|
||
|
||
[3/7/2021 5:06 PM] themitch22
|
||
https://youtu.be/IqLUHj7nJhI
|
||
|
||
{Embed}
|
||
Mad's Tech
|
||
https://www.youtube.com/watch?v=IqLUHj7nJhI
|
||
SBUS RC PROTOCOL HOW IT WORKS - Futaba Vs Frsky Inverted Complete...
|
||
Talking about SBUS and the different versions ie FrSky Inverted and standard Futaba RC protocol for drones and rc planes and heli, talking about its data rates and how it actually works on drones RC gear and showing it on an Rigol Oscilloscope.
|
||
|
||
More info on the Rigol Scopes can be found at www.telonic.co.uk
|
||
Rigol UK - https://www.rigol-uk.co.u...
|
||
https://images-ext-1.discordapp.net/external/Zui1esO0FvwimO0zG7Q6sPgmzuJXIxawaWHHjbR2MTI/https/i.ytimg.com/vi/IqLUHj7nJhI/maxresdefault.jpg
|
||
|
||
|
||
[3/7/2021 5:07 PM] themitch22
|
||
The library as far as I understand, sets up UART with 100,000 baud, I don't know if it assumes the signal is inverted, that's easy enough to do with a transistor but I still don't know how this library works
|
||
|
||
|
||
[3/7/2021 5:46 PM] skyspook
|
||
Given it's using the UART library, and I don't see any inverting of bits going on, I'd say that all of the voltages are going to be non-inverted. There is an invert parameter you can pass to the init function, I believe that should invert the logic for you
|
||
|
||
|
||
[3/7/2021 5:49 PM] skyspook
|
||
I assume you'd be looking for invert = (UART.INV_RX | UART.INV_TX)
|
||
|
||
|
||
[3/7/2021 5:50 PM] themitch22
|
||
Is that for C or micropython?
|
||
|
||
|
||
[3/7/2021 5:50 PM] themitch22
|
||
the pico doesn't seem to match the micropython documentation
|
||
|
||
|
||
[3/7/2021 9:50 PM] themitch22
|
||
Sooo the micropython app works. And confirmed with my o-scope that it is a 0v low 3.3v high signal so it should read as UART
|
||
|
||
|
||
[3/7/2021 10:17 PM] skyspook
|
||
Yea, sorry, I eas just reading the micropython docs. So the app works... But the controller isn't responding? Or is it celebration time?
|
||
|
||
|
||
[3/7/2021 11:10 PM] themitch22
|
||
The Pico is running the program correctly (print commands returning values) but the UART data isn't correct
|
||
|
||
|
||
[3/7/2021 11:10 PM] themitch22
|
||
I think its the pi pico UART implementation that's the issue
|
||
|
||
|
||
[3/7/2021 11:11 PM] themitch22
|
||
I can try it with an esp32 maybe
|
||
|
||
|
||
[3/8/2021 1:21 AM] themitch22
|
||
Well I had UART wrong. I do need to invert the signal after all.
|
||
|
||
|
||
[3/8/2021 1:22 AM] themitch22
|
||
|
||
|
||
{Attachments}
|
||
https://cdn.discordapp.com/attachments/300062878676025344/818383035401502771/20210308_011027.jpg?ex=67b8d258&is=67b780d8&hm=cd8ba0a3e540d704cf777c739a8a4d7cde0272f03bf3c4fdfcef37a62f3c5b1d&
|
||
|
||
|
||
[3/8/2021 1:22 AM] themitch22
|
||
|
||
|
||
{Attachments}
|
||
https://cdn.discordapp.com/attachments/300062878676025344/818383075796320276/20210308_012206.jpg?ex=67b8d262&is=67b780e2&hm=0724bd814415992768955e4053ba08a27e27c3e3c5da0570b0feb8eacd7aec73&
|
||
|
||
|
||
[3/8/2021 1:22 AM] themitch22
|
||
Yep that's the difference
|
||
|
||
|
||
[3/8/2021 1:22 AM] themitch22
|
||
Eureka
|
||
|
||
|
||
[3/8/2021 1:22 AM] themitch22
|
||
I'll just use the freaking 74S04 and get it over with
|
||
|
||
{Reactions}
|
||
dms (3)
|
||
|
||
[3/26/2021 10:10 PM] nullinterface
|
||
|
||
|
||
{Attachments}
|
||
https://cdn.discordapp.com/attachments/300062878676025344/825205183906578492/gh6uj6rhvfp61.png?ex=67b94037&is=67b7eeb7&hm=7128548823b6d08d3b3ccff9dc1214dcc40dd60964d1690bf20b0578d32ea0ce&
|
||
|
||
|
||
[3/27/2021 1:19 AM] gtometich
|
||
I saw that post and was wondering if that was something outside an engineering university dorm or something similar. I could've sworn I've seen something like that posted before
|
||
|
||
|
||
[4/12/2021 9:39 PM] bupalup4665
|
||
Anyone have vacuum tubes?
|
||
|
||
|
||
[4/12/2021 11:07 PM] themitch22
|
||
I found a pack of tubes in e-lab somewhere on those wire shelves
|
||
|
||
|
||
[4/14/2021 10:58 PM] hardsuit
|
||
There used to be a bunch, plus small selection of Nixies
|
||
|
||
|
||
[6/3/2021 12:15 AM] ravennvermore
|
||
i'm not sure if i should post this here or in #computer-committee ... i thought this might be more appropriate as it's more soldering & figuring out what's going on with the hardware side of things ... Louis Rossmann makes a bunch of videos on youtube on how to fix various things & he's been putting a wiki together ... https://repair.wiki/w/Repair_Wiki
|
||
|
||
{Embed}
|
||
https://repair.wiki/w/Repair_Wiki
|
||
Repair Wiki
|
||
Right to Repair is the concept that you should be able to choose who repairs the device you own.The goal of the Repair Preservation Group Wiki is to create a repository of information for repairing devices with common problems and solutions.Anyone can post articles on how to repair anything. If you know how to fix something that isn't here, post...
|
||
https://images-ext-1.discordapp.net/external/1Cr31LkguvVaTZ8NdXmdRwVDFxOIN-GflIkPgNTOHro/https/repair.wiki/images/b/bc/Wiki.png
|
||
|
||
|
||
[6/3/2021 1:17 AM] talkers
|
||
He's awesome. I didn't know about the wiki, so thank you
|
||
|
||
|
||
[6/3/2021 1:18 AM] talkers
|
||
#rightToRepair
|
||
|
||
|
||
[6/3/2021 8:21 AM] kenpurcell
|
||
Or his discord channel!
|
||
|
||
|
||
[6/27/2021 3:07 PM] canibalcrab
|
||
https://hackaday.com/2021/06/25/a-custom-clock-with-led-filament-hands/
|
||
|
||
{Embed}
|
||
Zach Zeman
|
||
https://hackaday.com/2021/06/25/a-custom-clock-with-led-filament-hands/
|
||
A Custom Clock With LED Filament Hands
|
||
LEDs have become so ubiquitous in our projects that just hearing that term probably conjures images of tiny illuminated domes in an array of single-spectrum colors. It’s easy to forget that t…
|
||
https://images-ext-1.discordapp.net/external/gFxHxnR58s0HkXypSOztEeJcP3M5c_cS3MI7eUpCZoU/https/hackaday.com/wp-content/uploads/2021/06/led_filament_clock_feature.jpg
|
||
|
||
|
||
[6/27/2021 3:08 PM] canibalcrab
|
||
I found the clock we need to make to the elab
|
||
|
||
|
||
[6/27/2021 3:12 PM] themitch22
|
||
It would be really cool if it actually used discrete component circuitry like the clock in Tanners.
|
||
|
||
|
||
[6/27/2021 3:43 PM] michaelb5250
|
||
https://www.transistorclock.com/
|
||
|
||
|
||
[7/2/2021 9:22 AM] nullinterface
|
||
Utility installed new transformers in my neighborhood and I find the ratings on them confusing - 75KVA and 50KVA. In my mind that's basically 75kW and 50kW respectively, which seems awfully small when the 150A panel in my house can theoretically draw 36kW and each transformer serves something like 5-8 structures.
|
||
|
||
|
||
[7/2/2021 9:24 AM] nullinterface
|
||
Also they're stamped 7200V, which - assuming KVA = kW - for a 50kVA unit would be <7A on the supply side
|
||
|
||
|
||
[7/2/2021 9:30 AM] skyspook
|
||
Rating is in kVA cause of power factors and how the loading works. Could be less or more in wattage than that rating. But also, yes, if everyone were to go to max on everything, you may blow the transformer. Watched it happen once, pretty display...
|
||
|
||
|
||
[7/2/2021 9:31 AM] skyspook
|
||
This explains it with the math a bit https://www.electricaltechnology.org/2012/02/why-transformer-rating-in-kva-not-in-kw.html/amp
|
||
|
||
{Embed}
|
||
https://www.electricaltechnology.org/2012/02/why-transformer-rating-in-kva-not-in-kw.html/amp
|
||
Why Transformer Rated In kVA, Not in KW? - Electrical Technology
|
||
Transformer Always Rated In kVA instead of KW. Why Motor rated in kW instead of kVA? Why AC (Air-condition) rating in Ton, not kW or kVA? Why Alternator rated in kVa, not in kW? Why Battery rated in Ah and not in VA? Why Power Plant Capacity Rated in MW and not in MVA?
|
||
https://images-ext-1.discordapp.net/external/aayWJ77PTabJ6yx61Un8pCCDiJ_9P4w24B8-5UncQ1c/https/www.electricaltechnology.org/wp-content/uploads/2012/02/Why-Transformer-Rated-In-kVA-Not-in-KW.png
|
||
|
||
|
||
[7/2/2021 9:32 AM] nullinterface
|
||
I assumed it has something to do with the heat load it can handle and less the power delivery
|
||
|
||
|
||
[7/2/2021 9:35 AM] nullinterface
|
||
because it's hard to imagine it being limited to 50kW net delivery
|
||
|
||
|
||
[7/2/2021 9:42 AM] nullinterface
|
||
of course, reality is that big motors - like HVAC compressors - only pull peak startup loads for a second or so and generally don't all start at once after a blackout
|
||
|
||
|
||
[7/2/2021 10:48 AM] michaelb5250
|
||
Odds are those few houses really are limited to 50kVA continuous. They probably looked at what loads those houses had been using in the past, along with some knowledge of what an average house uses, and decided 50kVA was fine. There's likely some wiggle room for overloads like maybe 1 hour at 55 or 60kVA.
|
||
|
||
|
||
[7/2/2021 10:49 AM] nullinterface
|
||
can probably handle brief loads well in excess of that?
|
||
|
||
|
||
[7/2/2021 10:50 AM] michaelb5250
|
||
Yeah, probably. It's mostly a heat thing, so the thermal mass of the all the steel in the transformer gives it some overload capability.
|
||
|
||
|
||
[7/2/2021 10:50 AM] nullinterface
|
||
i.e. anyone on an analog thermostat probably had their HVAC units all restart within a second of power being restored after the replacement was re-energized
|
||
|
||
|
||
[7/2/2021 10:53 AM] michaelb5250
|
||
I'd be surprised if those types of surges we _not_ a factor in designing the transformer.
|
||
|
||
|
||
[7/2/2021 10:53 AM] nullinterface
|
||
just weird that with EV's coming down the pipe they didn't plan ahead
|
||
|
||
|
||
[7/2/2021 10:53 AM] nullinterface
|
||
and possibly in another decade or so heat pumps starting to displace gas furnaces
|
||
|
||
|
||
[7/2/2021 10:54 AM] michaelb5250
|
||
Hopefully by the time EVs are that prevalent, they can stagger their charge times or something equally clever to reduce peak loading.
|
||
|
||
|
||
[7/2/2021 10:55 AM] nullinterface
|
||
Ford is throwing brute force at the problem with the F150 lighting - that's going to be an *immense* battery pack
|
||
|
||
|
||
[7/2/2021 10:56 AM] nullinterface
|
||
I imagine much of the expense of the re-engineering in my 'hood was the installation of new conduits / conductors between transformers
|
||
|
||
|
||
[7/2/2021 10:57 AM] nullinterface
|
||
if they need to upgrade transformers that's probably a one-day project
|
||
|
||
|
||
[7/2/2021 11:11 AM] andrew5152
|
||
"just weird that ... they didn't plan ahead"
|
||
ROFL
|
||
|
||
|
||
[7/2/2021 11:11 AM] nullinterface
|
||
distribution providers supposed to be playing the *long game*
|
||
|
||
|
||
[7/2/2021 11:12 AM] andrew5152
|
||
stop....my sides are splitting!
|
||
|
||
|
||
[7/2/2021 11:12 AM] nullinterface
|
||
trains are supposed to run on time and children are supposed to respect their parents
|
||
|
||
|
||
[7/2/2021 11:13 AM] andrew5152
|
||
!Askhrew#$,,,sjd#!@
|
||
|
||
|
||
[7/2/2021 11:13 AM] nullinterface
|
||
I dunno. whatever happened to actual *utilities* that made small consistent profits, engaged in actual long-term planning, while providing reliable service?
|
||
|
||
|
||
[7/2/2021 11:14 AM] nullinterface
|
||
oh wait. *deregulation* since it was more important that someone's brother-in-law makes a fast buck "trading" a resource that's still produced/delivered/consumed the same way as always.
|
||
|
||
|
||
[7/2/2021 11:24 AM] andrew5152
|
||
I was going hereish
|
||
https://www.scientificamerican.com/article/nitrogen-fertilizer-anniversary/
|
||
|
||
{Attachments}
|
||
https://cdn.discordapp.com/attachments/300062878676025344/860556556159549470/unknown.png?ex=67b9517f&is=67b7ffff&hm=b7c000720c9137832d8960ed75f0b0ce7d921cca41e6418b71c00ac5b8d79fd2&
|
||
|
||
{Embed}
|
||
https://www.scientificamerican.com/article/nitrogen-fertilizer-anniversary/
|
||
Nitrogen Fertilizer: Agricultural Breakthrough--And Environmental Bane
|
||
A new report citing drawbacks of the corn ethanol craze casts a pall over the centennial of a Nobel Prize-winning discovery that transformed global food production
|
||
https://images-ext-1.discordapp.net/external/wpcWxDRi8tJ3F9C9OkO-39eih9rV1EmhoNvgKHI7v0Q/http/www.scientificamerican.com/themes/responsive/images/global/oglogo.png
|
||
|
||
|
||
[7/2/2021 11:41 AM] nullinterface
|
||
corn ethanol has always had problems
|
||
|
||
|
||
[7/2/2021 11:42 AM] nullinterface
|
||
its failure to produce an acceptable energy ROI was known long before GM made those dumb commercials touting their E85-compatible engines
|
||
|
||
|
||
[7/2/2021 12:47 PM] nullinterface
|
||
but hey - E85 might be a rarity now but the corn lobby got their wish and it replaced MTBE as a gasoline additive
|
||
|
||
|
||
[7/18/2021 11:39 PM] denzuko
|
||
is arduino programming remotely possible on CB4?
|
||
|
||
|
||
[7/18/2021 11:39 PM] denzuko
|
||
I keep getting timeout errors trying to upload my sketch to an esp8266 thing board dev
|
||
|
||
|
||
[9/8/2021 12:23 AM] baitsyb8c
|
||
I was using an AC/DC converter box for my macbook, and running the USB-C cable to my headphones. Cable frayed and died while my headphones were plugged in. Now the headphones won’t charge
|
||
|
||
|
||
[9/8/2021 12:24 AM] baitsyb8c
|
||
Is this something that can be fixed by replacing 1-2 parts in the charging port / battery?
|
||
|
||
|
||
[9/8/2021 12:24 AM] baitsyb8c
|
||
Or just the invest in new ones? They’re nice headphones btw
|
||
|
||
|
||
[10/19/2021 10:04 AM] samysuicide6918
|
||
Hello, i got parts for a mpcnc and i need some help putting them together on the controller and stepper motors i have. I just need help makinf sure it connects and functions and i could use any wisedom or advice yall have. Im willing to met up at makers space to test and run it if someone is free this Thursday and friday
|
||
|
||
|
||
[10/19/2021 10:05 AM] samysuicide6918
|
||
I figure 20$ and a meal to pay for your time would be worth it.
|
||
|
||
|
||
[10/22/2021 7:17 PM] .madcoder
|
||
Hey all. Bought a little board intended to be used with a RPi but failed to realize it didn't come with a connector I need. based on Google I think it's a JST SH connector. 10-pin 1mm pitch. described here: https://wiki.geekworm.com/X630-Hardware
|
||
|
||
|
||
[10/22/2021 7:17 PM] .madcoder
|
||
any suggestions on where to get such a connector? I'm finding some stuff but everything is overseas so far
|
||
|
||
|
||
[10/22/2021 7:22 PM] .madcoder
|
||
oh, and I need female jumper wire on the other end for plugging into GPIO
|
||
|
||
|
||
[10/22/2021 9:54 PM] themitch22
|
||
What does this board do?
|
||
|
||
|
||
[10/23/2021 1:54 AM] .madcoder
|
||
HDMI input -> CSI. Plugs directly into a Pi. Alternative would be a USB capture device.
|
||
|
||
|
||
[10/23/2021 2:46 PM] ealott
|
||
Ooh, is that for a Pi KVM?
|
||
|
||
|
||
[10/23/2021 3:24 PM] .madcoder
|
||
It could be used for one, I'm sure, but that's not my intent. Trying to use it for live stream setup.
|
||
|
||
|
||
[11/5/2021 11:40 AM] jdozer6
|
||
Hey all, I was wondering if anyone is familiar with a way to mass encode NFC tags? I saw a youtube video with a maker type device but didn't know if there was a commercial option available and if there is a software solution as well.
|
||
|
||
|
||
[11/5/2021 1:05 PM] jsnowfreedman
|
||
How many are you looking at? There are some USB pads that can interact with some software that I've used in the past, but most of them aren't very good - especially if you want like an automatic way to increment IDs or pull from a DB or something.
|
||
|
||
|
||
[11/5/2021 1:05 PM] jsnowfreedman
|
||
(there is one that I'm trying to find the name of again that had a piece of software that was just an API, so you could write your own 'programmer' in the language of choice and easily interact with the actual USB programmer
|
||
|
||
|
||
[11/5/2021 1:05 PM] jdozer6
|
||
a couple hundred thousand
|
||
|
||
|
||
[11/5/2021 1:06 PM] jsnowfreedman
|
||
Ohboy
|
||
|
||
|
||
[11/5/2021 1:06 PM] jdozer6
|
||
lol yea
|
||
|
||
|
||
[11/5/2021 1:08 PM] themitch22
|
||
@Nodoze he's not active in this discord but he can probably give you insight into this.
|
||
|
||
{Reactions}
|
||
👏🏻
|
||
|
||
[11/5/2021 1:08 PM] jdozer6
|
||
thank you! yea, i'm working with a programmer now, i'm just trying to give him a head start but also i need to test my setup lol
|
||
|
||
|
||
[11/5/2021 1:09 PM] jsnowfreedman
|
||
A few years ago I built a little device that would take a hundred of the little disk NFCs in a stack, and program them one by one, but even with that doing thousands will be painful
|
||
|
||
{Reactions}
|
||
👍🏻
|
||
|
||
[11/5/2021 1:10 PM] jdozer6
|
||
https://www.youtube.com/watch?v=DQeIvelsM94
|
||
|
||
{Embed}
|
||
GoToTags
|
||
https://www.youtube.com/watch?v=DQeIvelsM94
|
||
Reel-Reel NFC Encoder - Hardware Start/Stop | GoToTags
|
||
The GoToTags NFC Encoder software and Reel-Reel NFC Encoder hadrware can encode variable NDEF data onto NFC tags. The hardware and software are integrated to allow for motor controls.
|
||
|
||
This is an older version of the hardware.
|
||
|
||
▶︎▶︎▶︎ Download GoToTags NFC Encoder Software
|
||
https://gototags.com/encoder/
|
||
|
||
▶︎ GoToTags
|
||
• Windows & Mac desktop softwa...
|
||
https://images-ext-1.discordapp.net/external/YJ75r3ut9v5utpwyVTU8Vg6STkG0OncCkZK_Jw3l11s/https/i.ytimg.com/vi/DQeIvelsM94/maxresdefault.jpg
|
||
|
||
|
||
[11/5/2021 1:10 PM] jdozer6
|
||
i'm basically completely replicating this, but they obviously have their own software
|
||
|
||
|
||
[11/5/2021 1:28 PM] jsnowfreedman
|
||
-nodsnodsnods- well if you need a second programmer or anything feel free to ping me, sounds fun and it's been a while since I've worked on any of that stuff
|
||
|
||
{Reactions}
|
||
👍
|
||
|
||
[11/5/2021 6:03 PM] doug.emes
|
||
assigned Art my proxy for this weekend
|
||
|
||
|
||
[11/8/2021 4:42 PM] doug.emes
|
||
https://www.raspberrypi.com/software/operating-systems/
|
||
|
||
{Embed}
|
||
https://www.raspberrypi.com/software/operating-systems/
|
||
Operating system images – Raspberry Pi
|
||
From industries large and small, to the kitchen table tinkerer, to the classroom coder, we make computing accessible and affordable for everybody.
|
||
https://images-ext-1.discordapp.net/external/x8xlFCWjRpj04UzsWk3gj1cuKsbFEpdCkJYPkoXt6oE/https/assets.raspberrypi.com/static/opengraph-6d80de9a444335c577028951fd1bab78.png
|
||
|
||
|
||
[11/8/2021 4:42 PM] doug.emes
|
||
New OS available
|
||
|
||
|
||
[11/21/2021 12:31 PM] doug.emes
|
||
While watching youtube today, I came across a competitor to the TS100 that utilizes a RISC-V instead of STM32 micro in their pen style soldering iron: https://pine64.com/product/pinecil-smart-mini-portable-soldering-iron/
|
||
Youtube video (highly favorable review, no comment about if it was for compensation or not)
|
||
https://www.youtube.com/watch?v=k-wo_al9QJU
|
||
|
||
{Embed}
|
||
https://pine64.com/product/pinecil-smart-mini-portable-soldering-iron/
|
||
PINECIL – Smart Mini Portable Soldering Iron - PINE STORE
|
||
A smart and affordable soldering iron running on a RISC-V SoC and featuring an open-source firmware. Portable and powerful, $24.99
|
||
https://images-ext-1.discordapp.net/external/XXNoSH-G_Q_3vkEkvRfnGQjS_0Qvnn0RH24y8WwqoAs/https/pine64.com/wp-content/uploads/2020/11/pinecil-bb2-01.jpg
|
||
|
||
{Embed}
|
||
Adrian's Digital Basement
|
||
https://www.youtube.com/watch?v=k-wo_al9QJU
|
||
How can this soldering iron be so cheap and yet be so good?
|
||
I've been a longtime user of the TS100 soldering iron, and have been happy with it. This viewer donation is a nice step up and improvement over the TS100. I'm very impressed with it, especially considering the price.
|
||
|
||
Note, this may be the last Mid-Week-Mini-Mail-Call. I'll be posting most Mail call items on the second channel from now on.
|
||
|
||
-- ...
|
||
https://images-ext-1.discordapp.net/external/buq2i75UbRfVZvwWuo8SPMpuLPj5I48UzZxQkUWodvE/https/i.ytimg.com/vi/k-wo_al9QJU/maxresdefault.jpg
|
||
|
||
|
||
[11/21/2021 8:19 PM] ealott
|
||
That's a nice price point!
|
||
|
||
|
||
[11/21/2021 8:22 PM] canibalcrab
|
||
I wonder if I can use it for glass while I'm at shows
|
||
|
||
|
||
[11/21/2021 8:27 PM] canibalcrab
|
||
https://www.amazon.com/gp/aw/d/B006MQD7M4/ref=psdcmw_3207126011_t3_B00FZPSX3G
|
||
instead of this one
|
||
|
||
{Embed}
|
||
https://www.amazon.com/gp/aw/d/B006MQD7M4/ref=psdcmw_3207126011_t3_B00FZPSX3G
|
||
Hakko Dial type temperature limiting soldering iron FX600
|
||
Best suited for soldering of electronic component i.e Soldering of IC/LED and P.W.B.,etc. Superior heat conductivity:T18 series soldering tips feature an redesigned appearance and internal structure that deliver improved heat conductivity. Use these soldering tips to achieve great heat recovery w...
|
||
https://images-ext-1.discordapp.net/external/4yOyFHUnzi1tn4cum5jnLrLbX6ZohUgvNsugKKskKGg/https/images-na.ssl-images-amazon.com/images/I/31QcT03H6nL._SR600%252c315_PIWhiteStrip%252cBottomLeft%252c0%252c35_PIStarRatingFOUR%252cBottomLeft%252c360%252c-6_SR600%252c315_ZA999%252c445%252c290%252c400%252c400%252cAmazonEmberBold%252c12%252c4%252c0%252c0%252c5_SCLZZZZZZZ_FMpng_BG255%252c255%252c255.jpg
|
||
|
||
|
||
[11/29/2021 7:03 PM] aceat64
|
||
Anyone have suggestions on what I could do with some leftover LiFePO4 cells? After I've built my 48v 16S battery I should have 6 cells leftover if none are DOA. Do I make a 12v 4S? 19V 6S? A 12v 4S and a 6v 2S??
|
||
|
||
These are 280Ah cells too, so they aren't exactly small 😅
|
||
|
||
|
||
[11/29/2021 9:18 PM] themitch22
|
||
Powerwheels racing series car
|
||
|
||
|
||
[11/29/2021 9:18 PM] themitch22
|
||
You'd probably never had to charge between races.
|
||
|
||
|
||
[11/29/2021 9:20 PM] themitch22
|
||
I think they have a battery limit though.
|
||
|
||
|
||
[11/29/2021 9:31 PM] kenpurcell
|
||
These for your eBike or other backup power? 12v is always useful for something! Although a lot of laptops use 19v wall warts. Infinite laptop time would be useful too!
|
||
|
||
|
||
[11/29/2021 10:06 PM] aceat64
|
||
so a crazy idea I had...
|
||
|
||
|
||
[11/29/2021 10:06 PM] aceat64
|
||
the cells are 3.2v nominal, which means I could probably run a microcontroller straight off the cell without even really worrying about voltage regulation
|
||
|
||
|
||
[11/29/2021 10:08 PM] aceat64
|
||
one cell, an ESP32, lorawan radio and a pelican case and now you've got something that could run for probably weeks, being a relay, tracker, whatever and it'll be entirely self contained, no need for solar panels or being placed somewhere with good sunlight.
|
||
|
||
|
||
[11/29/2021 10:08 PM] aceat64
|
||
now I just need a lorawan project lol
|
||
|
||
|
||
[11/30/2021 8:38 AM] kenpurcell
|
||
That idea could apply to many things like an ESP32 Cam for a trailcam. For me temp/humidity of a greenhouse or weather station.
|
||
|
||
|
||
[11/30/2021 8:48 AM] kenpurcell
|
||
Did you build packs with full on BMS? Was thinking a custom car jumper pack would be cool. It could live in the back of the SUV plugged into the remote cigarette lighter and be ready to go for anything. Charge phones & laptops, power lights, etc. The premade ones really suck!
|
||
|
||
|
||
[12/2/2021 6:26 PM] aceat64
|
||
|
||
|
||
{Attachments}
|
||
https://cdn.discordapp.com/attachments/300062878676025344/916123302739726336/PXL_20211202_1646206192.mp4?ex=67b919d0&is=67b7c850&hm=ea52b181fbc5309f3991fe2048847e68015a8db2a5ed03a20dd386f2b8234b84&
|
||
|
||
|
||
[12/2/2021 6:27 PM] aceat64
|
||
got some flexible LED filaments
|
||
|
||
|
||
[12/2/2021 7:09 PM] canibalcrab
|
||
those look cool. I need to play with some
|
||
|
||
|
||
[12/2/2021 7:17 PM] aceat64
|
||
they can get absurdly bright, one strand was pulling 1.4W
|
||
|
||
|
||
[12/2/2021 7:17 PM] aceat64
|
||
had to limit the current because it was blinding
|
||
|
||
|
||
[12/2/2021 8:16 PM] themitch22
|
||
So much cyberpunk jacket potential
|
||
|
||
|
||
[12/6/2021 12:39 PM] kenpurcell
|
||
Wild! I had some of the rigid ones but that is soo much cooler!
|
||
|
||
|
||
[12/6/2021 12:59 PM] skyspook
|
||
Those are very neat. Didn't see a lot of vendors, but saw this one: https://www.brickstuff.com/store/p198/flexfilament.html Not too pricey.
|
||
|
||
{Embed}
|
||
https://www.brickstuff.com/store/p198/flexfilament.html
|
||
300mm Flexible LED Filament in Multiple Colors (5-Pack)-- Brickstuff
|
||
Use this flexible 3V DC LED filament with 360-degree light for any DIY project or model. Filaments are sold in packs of five, and require soldering.
|
||
https://images-ext-1.discordapp.net/external/UIcTCDLXvDuqpYEeU22LI3kUUWo9zz1_VSMC3yRETsc/%3Fwidth%3D640/http/www.brickstuff.com/uploads/7/7/5/0/7750273/s330529193385665136_p198_i1_w997.jpeg
|
||
|
||
|
||
[12/6/2021 1:09 PM] canibalcrab
|
||
we were looking on AliExpress
|
||
|
||
|
||
[12/6/2021 1:09 PM] canibalcrab
|
||
theres 1300mm too
|
||
|
||
{Reactions}
|
||
dms
|
||
|
||
[12/6/2021 1:22 PM] skyspook
|
||
I keep forgetting to look there... and it also requires I'm patient and don't want near-instant gratification.
|
||
|
||
|
||
[12/6/2021 3:27 PM] aceat64
|
||
I buy aliexpress stuff all the time then forget about the orders
|
||
|
||
|
||
[12/6/2021 3:27 PM] aceat64
|
||
so randomly I get presents from myself
|
||
|
||
|
||
[12/6/2021 5:26 PM] skyspook
|
||
I do love presents from my past self...
|
||
|
||
|
||
[12/6/2021 5:50 PM] kenpurcell
|
||
Surprise AliExpress gifts are the best! The 1300mm are not too bad $$$ but limited colors for now, warm white, cool white, red, green, blue. Come on purple!
|
||
|
||
|
||
[12/6/2021 5:54 PM] aceat64
|
||
I can't wait until someone figures out addressable RGB in this format
|
||
|
||
|
||
[12/6/2021 6:03 PM] kenpurcell
|
||
that would really be a game changer.
|
||
|
||
|
||
[12/6/2021 7:45 PM] themitch22
|
||
These would be cool in even regular RGB
|
||
|
||
|
||
[12/10/2021 3:03 PM] aceat64
|
||
|
||
|
||
{Attachments}
|
||
https://cdn.discordapp.com/attachments/300062878676025344/918971283377627166/PXL_20211210_210145223.jpg?ex=67b8ea33&is=67b798b3&hm=2886090c2454405bc7b7b62b79603f2349cecc26d0873abe1bb498427b7e89bd&
|
||
|
||
|
||
[12/10/2021 3:04 PM] aceat64
|
||
Is a 0.3v drop pretty normal or should I be using larger than 12awg wires? That's like 6W of loss I think
|
||
|
||
|
||
[12/10/2021 3:08 PM] skyspook
|
||
Bigger is better
|
||
|
||
|
||
[12/10/2021 3:09 PM] skyspook
|
||
Might want to make sure it's actually 12awg and really copper - lots of fake wiring out there unfortunately
|
||
|
||
|
||
[12/10/2021 3:09 PM] michaelb5250
|
||
You'll get a more accurate check of drop in the wires by measuring the voltage across the wire itself, in the mV setting. I usually wouldn't trust the last digit of a meter. If 6W is too much loss for you then yeah go bigger but as long the insulation isn't getting soft and you don't smell it you shouldn't have major issues. There's also no harm going bigger.
|
||
|
||
|
||
[12/10/2021 3:10 PM] aceat64
|
||
It's legit wire (GXL), I bought from a trusted source :)
|
||
|
||
|
||
[12/10/2021 3:10 PM] aceat64
|
||
The wires are just barely warmer than ambient, so I'm not too worried on that front.
|
||
|
||
|
||
[12/10/2021 3:11 PM] aceat64
|
||
Guess I'll see if I have any lugs that would work with my 8awg GXL and these posts
|
||
|
||
|
||
[12/10/2021 3:11 PM] michaelb5250
|
||
I'm a big fan of charts like this for wire sizing. https://i0.wp.com/www.theengineblock.com/wp-content/uploads/2018/10/Wiring101.Chart_.Part1_.jpg?resize=633%2C420&ssl=1
|
||
|
||
{Embed}
|
||
https://i0.wp.com/www.theengineblock.com/wp-content/uploads/2018/10/Wiring101.Chart_.Part1_.jpg?resize=633%2C420&ssl=1
|
||
https://images-ext-1.discordapp.net/external/8TV8G3sqvruOrxR31Emi1exT5Ft71TY__t7CxBtfXBo/%3Fresize%3D633%252C420%26ssl%3D1/https/i0.wp.com/www.theengineblock.com/wp-content/uploads/2018/10/Wiring101.Chart_.Part1_.jpg
|
||
|
||
|
||
[12/10/2021 3:12 PM] michaelb5250
|
||
Usually they're set up for a max voltage drop of 5% or something
|
||
|
||
|
||
[12/10/2021 3:12 PM] aceat64
|
||
I went off the bluesea systems chart
|
||
|
||
|
||
[12/10/2021 3:12 PM] aceat64
|
||
|
||
|
||
{Attachments}
|
||
https://cdn.discordapp.com/attachments/300062878676025344/918973434871054416/DC_wire_selection_chartlg.jpg?ex=67b8ec34&is=67b79ab4&hm=3800465610fa0dc4770340f17408fe6fe45276c93b8fdae5fe32660c6bb1c8c2&
|
||
|
||
|
||
[12/10/2021 3:12 PM] michaelb5250
|
||
same concept. I don't have a preference just whatever shows up first on google, lol
|
||
|
||
|
||
[12/10/2021 3:12 PM] aceat64
|
||
lol
|
||
|
||
|
||
[12/10/2021 3:13 PM] aceat64
|
||
Call me crazy but final install when it's a 48v battery will use 2awg wires
|
||
|
||
|
||
[12/10/2021 3:14 PM] aceat64
|
||
Though I guess that's not terribly crazy for a 5kw inverter
|
||
|
||
|
||
[12/10/2021 3:15 PM] aceat64
|
||
I've got 00 on hand too
|
||
|
||
|
||
[12/10/2021 3:16 PM] michaelb5250
|
||
At some point it's a pita to work with.
|
||
|
||
|
||
[12/10/2021 3:17 PM] michaelb5250
|
||
Most of the time if we need 2/0 at work, we'll spec a pair of smaller wires in parallel instead.
|
||
|
||
|
||
[12/10/2021 3:22 PM] aceat64
|
||
Thankfully I don't have to run the wires far, since the battery will be right under the inverter
|
||
|
||
|
||
[12/10/2021 3:23 PM] aceat64
|
||
I should probably do a build log on the forums
|
||
|
||
|
||
[12/10/2021 3:23 PM] aceat64
|
||
So people can tell me what I'm doing wrong and how it'll burn down my house 🤣
|
||
|
||
|
||
[12/10/2021 3:38 PM] kenpurcell
|
||
There is a ESR meter in the eLab if you want super low resistance readings.
|
||
|
||
|
||
[12/10/2021 7:01 PM] mstovenour
|
||
Does your BMS have low voltage cutoff? Given that you are using LiPo I'd assume so but just checking because we nearly burned down a lab because the battery plant didn't have low voltage cutoff. The power supplies are basically constant power output so as the battery voltage drops the input current goes up (toward infinity). The battery plant melted all the insulation off the 2/0 wires we used as the battery voltage dipped toward zero.
|
||
|
||
|
||
[12/10/2021 7:01 PM] mstovenour
|
||
you can also just use a breaker to trip as the battery current approaches the safety limit of your wires.
|
||
|
||
|
||
[12/10/2021 7:10 PM] aceat64
|
||
it's LiFePO4 cells, so they're a good bit safer thankfully, but I am using a pretty nice BMS that covers pretty much everything
|
||
|
||
|
||
[12/10/2021 7:11 PM] aceat64
|
||
https://overkillsolar.com/product/bms-100a-16s-lifepo4/
|
||
|
||
{Embed}
|
||
overkillsolar
|
||
https://overkillsolar.com/product/bms-100a-16s-lifepo4/
|
||
16s BMS 100a LifePo4 Battery Management System for 48v DIY Batterie...
|
||
Still waiting for new Inventory… The BMS without wires is in stock but we are waiting for ocean shipping delays on the 8ga wire needed to finish them. Includes a Bluetooth communication modul…
|
||
https://images-ext-1.discordapp.net/external/XY1USGhGkuJNOijk9svK2hkYWC4vrB5t4ThWwbGC4Aw/https/overkillsolar.com/wp-content/uploads/2021/10/16s100a8ga1224mi.jpg
|
||
|
||
|
||
[12/10/2021 7:12 PM] aceat64
|
||
the charger is a Victron Energy MultiPlus-II, so I have a ton of control of charge/discharge parameters too
|
||
|
||
|
||
[12/10/2021 7:13 PM] aceat64
|
||
I may end up putting a small microcontoller between them to tell the inverter/charger to stop whenever the BMS calls for it, so I don't have to rely on just the mosfets of the BMS (it can disable charge and discharge independently)
|
||
|
||
|
||
[12/10/2021 7:14 PM] aceat64
|
||
I'm debating between a DC breaker and a fuse right now
|
||
|
||
|
||
[12/10/2021 7:14 PM] aceat64
|
||
as the final failsafe
|
||
|
||
|
||
[12/10/2021 7:15 PM] aceat64
|
||
https://github.com/FurTrader/Overkill-Solar-BMS-Arduino-Library
|
||
|
||
{Embed}
|
||
https://github.com/FurTrader/Overkill-Solar-BMS-Arduino-Library
|
||
GitHub - FurTrader/Overkill-Solar-BMS-Arduino-Library: Just the Ard...
|
||
Just the Arduino Library for Overkill Solar BMSs. Contribute to FurTrader/Overkill-Solar-BMS-Arduino-Library development by creating an account on GitHub.
|
||
https://images-ext-1.discordapp.net/external/dXAlP3ajXG4ld40VjkPgzy00Feiqk0NsEHh31GANkEc/https/opengraph.githubassets.com/a98aff1c5df5a2ba929675f8cef73fef493f2436636a70fe90c6adf0270c2a38/FurTrader/Overkill-Solar-BMS-Arduino-Library
|
||
|
||
|
||
[12/10/2021 7:16 PM] aceat64
|
||
there's even an arduino library for this BMS, which is nice
|
||
|
||
{Reactions}
|
||
🔋
|
||
|
||
[12/16/2021 11:35 AM] engpin1964
|
||
|
||
|
||
{Attachments}
|
||
https://cdn.discordapp.com/attachments/300062878676025344/921093192525414520/IMG_0116.jpg?ex=67b96222&is=67b810a2&hm=149e84c59191f99b4ae0e094944a0cfd40b91018bd90af3d2362e96935275ccd&
|
||
|
||
{Reactions}
|
||
❤️ (3) 😆
|
||
|
||
[12/16/2021 11:35 AM] engpin1964
|
||
When you want to feel like you’re at Dms but stuck at home
|
||
|
||
|
||
[12/16/2021 9:00 PM] ealott
|
||
Has anyone seen any USB to TTL converters around ELab? Preferably one that supports 3.3v RX/TX?
|
||
|
||
|
||
[12/21/2021 6:01 PM] ealott
|
||
Ah, there are two FTDI cables on the same drawer as the Flukes.
|
||
|
||
|
||
[12/29/2021 2:33 PM] nullinterface
|
||
anyone ever troubleshoot a USB battery bank + AC inverter?
|
||
|
||
|
||
[1/25/2022 9:27 PM] doug.emes
|
||
no but i once charged a dead car battery by uisng a float charger plugged into an inverter plugged into a car.... there were no jumper cables
|
||
|
||
|
||
[1/28/2022 9:42 AM] gtometich
|
||
Do I need to be trained to use the desoldering tools, or is the instruction manual and YouTube ok?
|
||
|
||
|
||
[1/28/2022 9:57 AM] kenpurcell
|
||
No training required your plan to look up the information should have you covered.
|
||
|
||
|
||
[1/28/2022 10:08 AM] gtometich
|
||
Thank you!
|
||
|
||
|
||
[1/28/2022 10:13 AM] kenpurcell
|
||
Not sure where the solder gun is but it normally lives in the bottom drawer of the black toolbox.
|
||
|
||
|
||
[1/28/2022 11:18 AM] gtometich
|
||
Saw this on Talk, so I’ll just need to look once I get up there
|
||
|
||
{Attachments}
|
||
https://cdn.discordapp.com/attachments/300062878676025344/936671484871594004/IMG_6099.png?ex=67b95e0c&is=67b80c8c&hm=f01f5f8576a48f983037513c28851eeff32a424992ac3bfa7ebe9c26b7e5f1fc&
|
||
|
||
|
||
[2/3/2022 12:02 PM] kenpurcell
|
||
Interesting idea to essentially unroll a stepper motor into a flat pcb https://youtu.be/uL6e3co4Qqc
|
||
|
||
{Embed}
|
||
SRI International
|
||
https://www.youtube.com/watch?v=uL6e3co4Qqc
|
||
Magnetically Actuated Micro-Robots for Advanced Manipulation Applic...
|
||
SRI is developing technology to reliably control thousands of micro-robots for smart manufacturing of macro-scale products in compact, integrated systems.
|
||
|
||
Learn more: http://www.sri.com/work/projects/microfactories-for-smart-manufacturing
|
||
https://images-ext-1.discordapp.net/external/GIN6WlADKHoI7uf4XXNvvpL2TWCXqQb0loTWuPCEimk/https/i.ytimg.com/vi/uL6e3co4Qqc/sddefault.jpg
|
||
|
||
{Reactions}
|
||
👍
|
||
|
||
[2/3/2022 12:18 PM] kenpurcell
|
||
another interesting vid https://www.youtube.com/watch?v=xPUEOhMBpUw
|
||
|
||
{Embed}
|
||
Miniatur Wunderland
|
||
https://www.youtube.com/watch?v=xPUEOhMBpUw
|
||
Gerrit's Tagebuch #80 - Schwebende Autos: Hightech in Monaco
|
||
Große Neuigkeiten von der Formel 1 Strecke! Seit über sechs Jahren versuchen Gerrit und sein Team im Monaco-Abschnitt auf 21-Meter Strecke ein realistisches Formel-1-Rennen mit Überholmanövern, Ziehharmonika-Effekt in Kurven, Boxengasse und immer neuen Zieleinläufen zu entwickeln. Vor über drei Jahren haben wir angefangen, weltweit Leiterplatten...
|
||
https://images-ext-1.discordapp.net/external/ZdbRHi4IHwJs5DlMx3vA3pzphdlUhAPV19zFFvz6yNA/https/i.ytimg.com/vi/xPUEOhMBpUw/maxresdefault.jpg
|
||
|
||
|
||
[2/7/2022 12:36 PM] nullinterface
|
||
https://www.facebook.com/groups/259905524039336?multi_permalinks=5371956299500874
|
||
|
||
{Embed}
|
||
https://www.facebook.com/groups/259905524039336?multi_permalinks=5371956299500874
|
||
Log in or sign up to view
|
||
See posts, photos and more on Facebook.
|
||
|
||
|
||
[2/9/2022 4:19 PM] engpin1964
|
||
|
||
|
||
{Attachments}
|
||
https://cdn.discordapp.com/attachments/300062878676025344/941096094228676638/IMG_0512.png?ex=67b8fc09&is=67b7aa89&hm=bc3c60e7c13c87a036ee910a265ec094d605095fe57ad6d2c68dc6f8766b4fe2&
|
||
|
||
|
||
[3/12/2022 11:47 AM] aceat64
|
||
|
||
|
||
{Attachments}
|
||
https://cdn.discordapp.com/attachments/300062878676025344/952261653121073212/PXL_20220312_174734218.MP.jpg?ex=67b96506&is=67b81386&hm=ba0a8395d0dc0dffe717ffc40a8aeaea1057ddd039464ece7ee733e505f6aa8e&
|
||
|
||
|
||
[3/12/2022 11:48 AM] aceat64
|
||
Got my flipper zero! Time to do some wireless hacking
|
||
|
||
|
||
[3/12/2022 11:48 AM] aceat64
|
||
https://flipperzero.one/
|
||
|
||
{Embed}
|
||
https://flipperzero.one/
|
||
Flipper Zero — Portable Multi-tool Device for Geeks
|
||
Based on ultra low power STM32 MCU for daily exploration of access control systems and radio protocols. Open source and customizable
|
||
https://images-ext-1.discordapp.net/external/aUJYV2zlIW14f_B9Wd9JwG9wT6BcZekLPqdJ1RszqLQ/https/static.tildacdn.com/tild3038-3932-4065-a163-656631323038/main-2500-2.jpg
|
||
|
||
|
||
[3/12/2022 6:04 PM] ealott
|
||
That looks seriously cool. Any interest in doing an informal demo/experiment session at the Space?
|
||
|
||
|
||
[3/12/2022 6:23 PM] aceat64
|
||
sure!
|
||
|
||
|
||
[3/12/2022 6:23 PM] aceat64
|
||
I wonder if anyone else bought one
|
||
|
||
|
||
[3/12/2022 10:46 PM] hon1nbo
|
||
I was on the fence and ultimately didn't since I'd been burned by too many projects that didn't deliver
|
||
|
||
{Reactions}
|
||
👍
|
||
|
||
[3/12/2022 10:47 PM] hon1nbo
|
||
Can't wait to see how they do
|
||
|
||
|
||
[3/13/2022 11:07 AM] timooni
|
||
How unrealistic would it be for a complete beginner like myself to attempt to reflow and test repairing my dead graphics card? Like, it sounds like something that is way over my head, but they're absurdly pricy right now... Or is it something where, if it dies of "old age," it's just beyond repair?
|
||
|
||
|
||
[3/13/2022 11:08 AM] timooni
|
||
Like I'd have no idea where to begin, how to test and find the fault on a bench without going back and forth with my computer, I know how to solder things ofc... Or does it have a microchip on it, that would make things kinda impossible if that was the part causing the issue lol
|
||
|
||
|
||
[3/13/2022 11:10 AM] timooni
|
||
On the surface it seems like something really impractical but, I thought what the heck, maybe it's actually not and I just wouldn't have the experience to know if it's not impractical
|
||
|
||
|
||
[3/14/2022 9:30 PM] jsnowfreedman
|
||
If you don't know what's wrong... It's fairly impractical. There are so many components that could be wrong with it I thought it would be really really difficult to just kind of check everything.
|
||
|
||
If you have an idea on what the issue might be, or if you're aware of some well-known problems like capacitors failing or something.... Those might be easier to actually fix yourself.
|
||
|
||
But unless you have like schematics and a lot of resources... And also have a working board preferably... And better yet a actual PCIe test station or something.... It would be difficult
|
||
|
||
|
||
[3/27/2022 12:04 PM] engpin1964
|
||
Who’s up for a field trip. https://texashillcountry.com/mysterious-tesla-tower-texas/amp/
|
||
|
||
|
||
[3/27/2022 9:12 PM] hon1nbo
|
||
I drive by this on the way to some family property. Milford is a nice little town.
|
||
I don't know if they still host it but they had a nice Salsa and Sangria festival to find their park
|
||
|
||
|
||
[3/29/2022 4:36 PM] aceat64
|
||
|
||
|
||
{Attachments}
|
||
https://cdn.discordapp.com/attachments/300062878676025344/958479900208136262/PXL_20220329_213622633.MP.jpg?ex=67b8f1f7&is=67b7a077&hm=cb8803dd0c0a5335c4ae4b84303ecb7ccc82f7a49e720ba7b51b1fff45dda41f&
|
||
https://cdn.discordapp.com/attachments/300062878676025344/958479901114134608/PXL_20220329_213639358.MP.jpg?ex=67b8f1f8&is=67b7a078&hm=a741ea00c9e86e6136b91d22040a1b6e66db753b9611b6e3e86adb982a382c3a&
|
||
|
||
|
||
[3/29/2022 4:37 PM] aceat64
|
||
I think I figured out why this sensor stopped reporting lol
|
||
|
||
|
||
[3/31/2022 5:43 PM] aceat64
|
||
I'm at the space for a bit with my flipper zero if anyone wants to play with it
|
||
|
||
{Reactions}
|
||
hacktheplanet
|
||
|
||
[3/31/2022 5:43 PM] aceat64
|
||
Totally worked for cloning my RFID
|
||
|
||
|
||
[4/6/2022 12:39 PM] aceat64
|
||
going to be at DMS this evening if anyone wants to check out the Flipper Zero
|
||
|
||
|
||
[4/23/2022 12:30 AM] aceat64
|
||
https://www.youtube.com/watch?v=vGjQcPUfBdM
|
||
|
||
{Embed}
|
||
Adafruit Industries
|
||
https://www.youtube.com/watch?v=vGjQcPUfBdM
|
||
Chip Shortage (a new feature) #ChipShortage #adafruit @Adafruit
|
||
Chip Shortage is a new feature video by Adafruit's Ladyada to highlight items that are in short supply or possibly "unobtainium" (with no known return date to the market).
|
||
|
||
Adafruit is working night and day to keep products in stock and deliver new products during the chip shortage. Visit https://www.adafruit.com/new to see what new items have b...
|
||
https://images-ext-1.discordapp.net/external/tf4B5qOHLaFqIKSvKUv4RdeE0Xp9zb8MPux7jN0zY4E/https/i.ytimg.com/vi/vGjQcPUfBdM/maxresdefault.jpg
|
||
|
||
|
||
[4/23/2022 12:30 AM] aceat64
|
||
highlights items that are in short supply or impossible to find
|
||
|
||
|
||
[5/26/2022 3:00 PM] aceat64
|
||
Flipper Zeros are available for pre-order again: https://shop.flipperzero.one/
|
||
|
||
{Embed}
|
||
https://shop.flipperzero.one/
|
||
Flipper Zero Shop
|
||
Flipper Zero is a versatile multi-tool, based on ultra low power STM32 MCU for daily exploring of access control systems and radio protocols. Fully open source and customisable.
|
||
https://images-ext-1.discordapp.net/external/Nyscc8JGI7EVY4ueH_Oczoh2pHqeoA77sElXbbNSjGM/%3Fv%3D1626188164/https/cdn.shopify.com/s/files/1/0527/9806/2745/files/main-2_b5c7bce3-0d29-43d9-ade5-0244b23c1f51.jpg
|
||
|
||
{Reactions}
|
||
👍
|
||
|
||
[5/27/2022 10:02 AM] jphelps
|
||
Out of stock again 😉
|
||
|
||
|
||
[5/27/2022 10:02 AM] limeytx
|
||
Hot product!
|
||
|
||
|
||
[5/27/2022 10:02 AM] jphelps
|
||
I want Pi, more Pi please!
|
||
|
||
|
||
[5/27/2022 10:03 AM] limeytx
|
||
Right??
|
||
|
||
|
||
[5/27/2022 10:03 AM] limeytx
|
||
I think they're saying 2023 for Pi to start shipping to US again, hope that was wrong
|
||
|
||
|
||
[5/27/2022 10:05 AM] jphelps
|
||
Scalpers will be sniping them until at least then!
|
||
|
||
|
||
[5/27/2022 10:05 AM] limeytx
|
||
Yeah
|
||
|
||
|
||
[5/27/2022 10:06 AM] limeytx
|
||
I'm still hunting for a Pi Zero W 2 for a friend
|
||
|
||
|
||
[5/27/2022 11:39 AM] themitch22
|
||
RP2040's are still available, Pi Pico
|
||
|
||
|
||
[5/27/2022 11:39 AM] themitch22
|
||
not a linux computer but dual-core ARM microcontroller
|
||
|
||
|
||
[5/27/2022 5:17 PM] doug.emes
|
||
How bad ya need it buddy
|
||
|
||
|
||
[5/27/2022 7:42 PM] limeytx
|
||
Why does that sound like a "make an offer"? LOL Its not urgent, I run an octoprint server with it on my ender, and my friend who has same printer wants the same set up
|
||
|
||
|
||
[5/27/2022 7:47 PM] doug.emes
|
||
I mean, I may have one setup like that right now, in a case, with a picam.
|
||
|
||
I could be convinced with a favor. Muahahahababa
|
||
|
||
{Reactions}
|
||
😋
|
||
|
||
[6/17/2022 2:31 PM] denzuko
|
||
Still waiting to get mine. Already got a pwnie pi, badusb (Bluetooth version) and some otg meshtastic nodes. After setting up the v3 rtlsdr I'll drop the coin for two or more flippers.
|
||
|
||
|
||
[6/17/2022 2:32 PM] aceat64
|
||
They just shipped out another round of orders, so hopefully you'll get it soon
|
||
|
||
{Reactions}
|
||
👍
|
||
|
||
[6/26/2022 9:31 PM] pondit
|
||
Do we have anything in the space for writing RFID chips, workign on a programming project and dont wanna sped $50 on one...
|
||
|
||
|
||
[6/27/2022 2:13 AM] doug.emes
|
||
Lots of rfid technology which frequently and encoding
|
||
|
||
|
||
[6/27/2022 3:59 PM] themitch22
|
||
We had a 125khz tag cloner I believe
|
||
|
||
|
||
[6/27/2022 4:00 PM] themitch22
|
||
You could program the rfid implants for hid prox and other protocols
|
||
|
||
|
||
[6/27/2022 5:48 PM] jphelps
|
||
We have a tag cloner/programmer in the Networking Closet, North, for use with members badges, tokens and implants.
|
||
|
||
|
||
[6/28/2022 10:23 PM] hon1nbo
|
||
Unless it was replaced with something not the cheap Chinese units (the small white, self-contained one) those are dangerous for implants; it sets the write password on t5577 chips
|
||
|
||
|
||
[6/28/2022 10:23 PM] hon1nbo
|
||
Which if you don't get a copy of the password from the unit, which is not always the same, you've effectively set the tag to be read only with whatever was there
|
||
|
||
|
||
[6/30/2022 4:11 PM] doug.emes
|
||
https://www.raspberrypi.com/news/raspberry-pi-pico-w-your-6-iot-platform/
|
||
|
||
{Embed}
|
||
https://www.raspberrypi.com/news/raspberry-pi-pico-w-your-6-iot-platform/
|
||
Raspberry Pi Pico W: your $6 IoT platform - Raspberry Pi
|
||
Today, we’re launching three new members of the Raspberry Pi Pico family: Raspberry Pi Pico W ($6), Pico H ($5) and Pico WH ($7).
|
||
https://images-ext-1.discordapp.net/external/xKGYlp2E8d8fz1vCC75w8Y1NJRzbU4ZcLNs-cDBqSfU/https/www.raspberrypi.com/app/uploads/2022/06/Copy-of-PICO-W-HERO-500x333.jpg
|
||
|
||
{Reactions}
|
||
👍 (2) 😍
|
||
|
||
[7/1/2022 7:53 AM] excalbian
|
||
I stumbled across the data sheet earlier this week and wanted one so bad... any source(s) have them in stock locally yet?
|
||
|
||
|
||
[7/1/2022 8:27 AM] limeytx
|
||
Microcenter might have some tomorrow if you're fast enough
|
||
|
||
{Attachments}
|
||
https://cdn.discordapp.com/attachments/300062878676025344/992421283591639040/unknown.png?ex=67b92818&is=67b7d698&hm=ea49009e8922f31d98f486b99d13b4ffec0dfc5db41d4f2cc27996d9c7bcff48&
|
||
|
||
|
||
[7/2/2022 1:52 PM] doug.emes
|
||
|
||
|
||
{Attachments}
|
||
https://cdn.discordapp.com/attachments/300062878676025344/992865422057676850/Screenshot_20220702-135228_Chrome.jpg?ex=67b9743b&is=67b822bb&hm=cac42d5843859ea0248737c3130b56aa2d017b6c2659f826df74f33b9496c3bd&
|
||
|
||
|
||
[7/2/2022 1:52 PM] doug.emes
|
||
So who got lucky? I slept in
|
||
|
||
|
||
[7/3/2022 12:12 AM] excalbian
|
||
Not I. Checked around 9:30 and they showed as "sold out" 😦
|
||
|
||
|
||
[7/5/2022 10:44 AM] excalbian
|
||
The guy at Microcenter this morning said they sold out of 76 units in five minutes.
|
||
|
||
{Reactions}
|
||
👌
|
||
|
||
[7/6/2022 9:34 AM] limeytx
|
||
Sheesh
|
||
|
||
|
||
[8/23/2022 2:44 PM] nullinterface
|
||
fkn low-end consumer electronics designers - why use one 2032 cell when you could use two 2016s with 75% of the energy density and maybe parity on power capability ... *accounting for twice the voltage?*
|
||
|
||
|
||
[8/23/2022 5:31 PM] limeytx
|
||
Supply 2 batteries when they could supply just one? Crazy talk Eric lol
|
||
|
||
|
||
[8/23/2022 6:54 PM] nullinterface
|
||
or in some cases supply one battery and make it a whole 1.6mm thicker
|
||
|
||
|
||
[8/24/2022 9:36 AM] themitch22
|
||
Most of the time I thought they stacked two cr2016 to get 6v instead of 3v, no need for a boost circuit.
|
||
|
||
|
||
[8/25/2022 5:13 PM] nullinterface
|
||
indeed, however this is an irritation to the user since 2016s effectively cost the same as 2032s. and I've had at least one device that claimed to use 2x2016 or 1x2032 that did not function with the latter.
|
||
|
||
|
||
[9/9/2022 4:28 PM] kenpurcell
|
||
|
||
|
||
{Attachments}
|
||
https://cdn.discordapp.com/attachments/300062878676025344/1017909383562276904/305392947_2042456469273101_5073501340563006098_n.png?ex=67b8effc&is=67b79e7c&hm=25ac9bbedda2bdeaf193dbb5fc9b37e7d2ecad8c071cf61557770a9184609e43&
|
||
|
||
{Reactions}
|
||
🤣
|
||
|
||
[11/4/2022 9:34 PM] canibalcrab
|
||
https://www.hackster.io/news/this-resistor-lamp-mirrors-the-color-codes-of-tested-resistors-9395d60f679b
|
||
|
||
{Embed}
|
||
https://www.hackster.io/news/this-resistor-lamp-mirrors-the-color-codes-of-tested-resistors-9395d60f679b
|
||
This Resistor Lamp Mirrors the Color Codes of Tested Resistors
|
||
To make resistor color codes easier to see, J built this awesome resistor lamp that mirrors the color code of any tested resistor.
|
||
https://images-ext-1.discordapp.net/external/uustrF29zOneuIgqBWl02NtFdzlBEaOWeb_YyM9xzxE/%3Fauto%3Dcompress%252Cformat%26w%3D600%26h%3D450%26fit%3Dmin/https/hackster.imgix.net/uploads/attachments/1517825/_Sih1yrScVZ.blob
|
||
|
||
{Reactions}
|
||
👍 (2) 👀
|
||
|
||
[11/14/2022 11:51 AM] ish07490
|
||
Hello all, I have a question. I’m a novice when it comes to electronic, but I’m about to tackle making an led sign. I’ll be wiring in several different LED strips, I’m trying to determine is there an advantage/ disadvanted to wirining them in parallel vs serial? If I can, I’d like to avoid having to solder both sides of the LED. Any advice would help me a lot. Thank you
|
||
|
||
|
||
[11/14/2022 3:21 PM] kenpurcell
|
||
The determination on wether to use serial, parallel or serial/parallel is what is the source voltage you want to drive your LED sign from. The forward voltage drop of most high efficiency LEDs is 2.2 volts. So if your using 12 volts (actually 13.8V) from a car, so it is pretty simple to put 5-6 LEDs in series. Here is a pretty good guide http://dangerousprototypes.com/docs/Basic_Light_Emitting_Diode_guide
|
||
|
||
{Reactions}
|
||
👍
|
||
|
||
[11/14/2022 4:48 PM] SlashBot#2566
|
||
|
||
|
||
{Embed}
|
||
ish#0402
|
||
**Created** 4/13/2021 9:17 PM
|
||
**Joined** 11/9/2022 11:35 PM
|
||
Roles (`0`)
|
||
none
|
||
Premium status
|
||
❌ [No Premium](https://patreon.com/slash_bot)
|
||
https://images-ext-1.discordapp.net/external/ukcQpEDC6rOSitEI8Na4OkIAutBZCDG1tCqFxB-AbTQ/%3Fsize%3D2048/https/cdn.discordapp.com/avatars/831714763201445929/9ba018ae4d8a9cf4d562f1c31c0a7f9f.png
|
||
https://images-ext-1.discordapp.net/external/vqeAiuIKCh3huebYeVnWwC4xuyu58vm7wuJl-t4gKaw/https/edge.doge.bio/colors/600x20/81b2e7.png
|
||
SlashBot User • ID: 831714763201445929
|
||
|
||
|
||
[11/15/2022 10:06 AM] tjs3
|
||
(you said LED sign, so I'm assuming individual control... if they are all the same color this may not apply)... For individually addressable LED strips the power is normally paralleled. Stable power is important. Small installations can have a single power connection but for anything larger I normally splice in power every few feet to keep it robust. Control signals go into 1 end of each strip of lights... and can come out the other end to daisy chain to the next strip (or you can start a new chain from your controller if that's easier)
|
||
|
||
{Reactions}
|
||
👍 (2)
|
||
|
||
[11/16/2022 1:08 PM] ish07490
|
||
Thank you all so much for responding. The source of my voltage will be the wall outlet. I’ll end up with 20 individual LED strips.
|
||
|
||
|
||
[11/16/2022 4:07 PM] kenpurcell
|
||
Are they individually addressable LEDs or just single color strips?
|
||
|
||
|
||
[11/16/2022 6:13 PM] tjs3
|
||
if youd like to meet up at the space and go over the LED goals, i could offer more suggestions. im available most evenings but will be out of town Fri-Sun this week
|
||
|
||
|
||
[11/29/2022 2:29 PM] ish07490
|
||
Tj thanks for the response. I didn’t realize that I missed it. I would definitely like to meet up. I’d appreciate that so much. I was planning to go this evening and tomorrow evening if you’d be free. I just want to make sure I’ve got the right idea with this project.
|
||
|
||
|
||
[11/30/2022 10:04 AM] tjs3
|
||
i'll be at the space tonight for the 7pm board meeting, would be happy to meet up before or after. I'll keep an eye out to meet up and I'll have my laptop and discord open
|
||
|
||
|
||
[11/30/2022 7:20 PM] tjs3
|
||
BoD meeting is over, I'll be near the arcade helping with setup and such... Wearing a blue hoodie. Cheers
|
||
|
||
|
||
[12/27/2022 2:32 PM] nullinterface
|
||
random, but anyone remember the long shelf life cells that Radio Shack sold in the late 80s-early 90s timeframe that one had to *twist to activate*?
|
||
|
||
|
||
[12/27/2022 2:32 PM] nullinterface
|
||
about the size of a D cell in a plastic housing
|
||
|
||
|
||
[12/27/2022 4:06 PM] mandarlimaye
|
||
Like these? https://spwindustrial.com/48-d-cell-code-red-emergency-20year-life-twist-top-activated-1-5v-battery-new/
|
||
|
||
{Embed}
|
||
https://spwindustrial.com/48-d-cell-code-red-emergency-20year-life-twist-top-activated-1-5v-battery-new/
|
||
48 - D-Cell Code Red Emergency 20Year Life Twist Top Activated 1.5V...
|
||
https://images-ext-1.discordapp.net/external/zGvdpWZvxdGw7hsbb0OAj-HiSqQDxUNDjAcQyi0Pvxg/%3Fc%3D2/https/cdn11.bigcommerce.com/s-46jufh/products/10386/images/7862/321614918111__47186.1421796883.386.513.jpg
|
||
|
||
{Reactions}
|
||
👍 (2)
|
||
|
||
[12/27/2022 4:16 PM] canibalcrab
|
||
that's wild. does it connect terminals when twisted? or is this some kind of glow stick magic
|
||
|
||
|
||
[12/28/2022 12:12 AM] hon1nbo
|
||
It's a chem mix IIRC. They also were a little under voltage.
|
||
Modern pre activated chems can have a shelf like of 15 years if you get the industrial and critical load versions.
|
||
|
||
|
||
[12/28/2022 12:13 AM] hon1nbo
|
||
I think Procell is 10 years (though have to source carefully now it seems, last Amazon batch were ripoffs. I last got some from Metroplex Battery)
|
||
|
||
|
||
[12/29/2022 9:09 AM] nullinterface
|
||
Thanks. That's what I was remembering.
|
||
|
||
|
||
[12/29/2022 9:11 AM] nullinterface
|
||
and ... ***dang*** ... that's expensive
|
||
|
||
|
||
[12/29/2022 9:23 AM] nullinterface
|
||
some fragmented speculative info here
|
||
https://www.candlepowerforums.com/threads/un-activated-d-cells.205925/
|
||
|
||
|
||
[3/5/2023 12:25 PM] chadpursley
|
||
Help, how do I get the projector in the Lecture hall working?
|
||
|
||
|
||
[1/3/2024 5:57 PM] freakd
|
||
Hey, I'm Roy, new to the space! 👋
|
||
I've visited once and was amazed, planning to sign up soon!
|
||
|
||
I have a Gaggia Classic Pro that I want to install a PID mod for, and ideally play with Gagguino.
|
||
|
||
My electronics skills are a bit rusty, I'd love some help in exchange for helping in any software / cybersecurity projects you may have! If anyone is up for that, I'm planning to come to the space during the weekend (Fri / Sat) and bring everything, so let me know if you feel like joining 🙂
|
||
|
||
|
||
==============================================================
|
||
Exported 1,052 message(s)
|
||
==============================================================
|